Heatilator B-Vent Gas Appliance Installation and Operation Manual

Key Features and Safety Information

Heatilator gas appliances offer a clean and efficient alternative to wood-burning fireplaces. This guide emphasizes safety, reliability, and efficiency.

• Important Safety Warnings: Includes precautions against fire hazards, gas leaks, and severe burns from hot surfaces. Always keep children away from the appliance.
• Installation Requirements: Installation and service must be performed by qualified professionals. Compliance with local, state, and national codes is mandatory.
• Negative Pressure: Understand the risks of negative pressure in a home and how it can affect fireplace draft and safety. Recommendations are provided for mitigating these effects, including the use of an outside air kit.
• Clearances and Framing: Detailed diagrams and specifications outline the necessary clearances to combustible materials for safe installation, including framing dimensions for alcove and chase installations.
• Venting: Information on vent system configuration, termination locations, and clearances to combustibles is provided to ensure proper exhaust of combustion gases.

Appliance Specifications

• Models Covered: RBV4236 and RBV4842 Series.
• Gas Type: Suitable for Natural Gas (NG) and Propane (LP).
• BTU Specifications: Input rates and orifice sizes are provided for both fuel types.
• High Altitude Installations: Guidance is given for installations above 2000 feet.

Installation Considerations

• Location: Select a location away from traffic areas and ensure adequate clearance around air openings and for service access.
• Chase Construction: Chases must be constructed to all clearance specifications and insulated to prevent cold air drafts.
• Materials: Distinguishes between non-combustible and combustible materials for safe installation practices.

Operation and Maintenance

The manual details the steps for operating the appliance, including lighting procedures and checks for proper draft. It also covers maintenance and troubleshooting to ensure continued safe and efficient operation.

For detailed information on specific components, accessories, and warranty, please refer to the respective sections within the full manual.

Contact Hearth & Home Technologies for further assistance or to order replacement parts.