Carrier TruVu Chilled Water System Optimizer

Introduction to the TV-OPT

The Carrier TruVu™ Chilled Water System Optimizer (TV-OPT) is designed to provide precise optimization of chilled water and condenser water setpoints. By carefully balancing the energy usage of both the chilled water plant equipment and the chilled water consumers, the TV-OPT helps to achieve a significant reduction in overall energy consumption and electrical demand.

This guide details the installation, configuration, and start-up procedures for the TV-OPT, ensuring efficient operation and optimal performance of your chilled water systems.

Key Features and Capabilities

• Acts as a BACnet router, supporting various BACnet communication types.
• Runs the Chilled Water System Optimizer control program.
• Facilitates communication between two BACnet/IP networks via the Gig-E port.
• Serves as a BACnet Broadcast Management Device (BBMD) for BACnet/IP networks.
• Supports Foreign Device Registration (FDR) and DHCP IP addressing.
• Includes built-in network diagnostic capabilities for troubleshooting.
• Offers network statistics viewable numerically or as trend graphs.
• Compatible with the i-Vu® v6.5 or later system.
• Can function as a gateway for Modbus serial and Modbus TCP/IP networks.

System Compatibility

The TruVu™ Chilled Water System Optimizer is versatile and can be applied to a wide range of chiller system designs, including:

• Systems with single or multiple chillers piped in parallel.
• Chilled water pumps, cooling towers, and condenser water pumps.
• Variable speed air handling unit fans.
• Systems with secondary and tertiary pumps, and variable air handling unit fans.
• Systems with multiple cooling towers and condenser water pumps.

The program is scalable and can be applied from minimal systems to larger, more complex configurations.

Important Considerations

For optimal performance and to avoid potential issues, please refer to the detailed sections within this guide regarding:

• Mounting: Proper installation in a suitable enclosure, with recommendations for high temperature and humidity environments.
• Wiring: Correct connections for power and communication networks (BACnet/IP, ARCNET, MS/TP, Modbus).
• Addressing: Configuration of rotary switch settings, autobaud, and IP addresses.
• Communication Setup: Establishing connections for Ethernet, ARCNET, MS/TP, and third-party devices.
• Driver Properties: Adjusting settings for optimal control.
• Troubleshooting: Guidance on identifying and resolving common issues using LED indicators and diagnostic tools.

Always ensure electrical power is disconnected before performing any wiring. For detailed safety precautions, consult the 'Safety Considerations' section.

For the latest product information and support, visit the Carrier Partner Community website at www.hvacpartners.com.