KOMPLEMENT Pull-Out Trouser Hanger
Assembly Instructions
Parts Included
- 4x Screws (109067)
- 2x Brackets (110670)
- 2x Mounting Plates (195225)
- 1x Left Drawer Slide Assembly
- 1x Right Drawer Slide Assembly
Refer to diagrams for specific part identification and quantities.
Assembly Steps
-
Step 1: Prepare the Cabinet
Attach the drawer slide assemblies to the inside of the cabinet using the provided screws. Ensure the slides are level and parallel. The diagram shows a person using a screwdriver to attach the slides.
-
Step 2: Attach Mounting Plates
Secure the mounting plates to the drawer slide assemblies. The diagram shows two mounting plates being attached with screws.
-
Step 3: Install the Hanger Frame
Attach the brackets to the main hanger frame. The diagram shows two brackets being attached to the frame with screws. Then, attach the assembled hanger frame to the mounting plates inside the cabinet.
-
Step 4: Insert the Trouser Hanger
Slide the trouser hanger mechanism into the installed drawer slides until it clicks into place. The diagram shows the trouser hanger being inserted into the slides.
Important Notes:
- Ensure all parts are correctly oriented before assembly.
- Refer to the diagrams for precise placement of screws and components.
- The product is designed and quality-checked by IKEA of Sweden.
Product Information
Brand: IKEA Product Line: KOMPLEMENT Product Type: Pull-Out Trouser Hanger Model Numbers: AA-2181126-3, 404.465.51, 904.465.01, 804.465.49, 604.465.45, 204.464.96
This product is part of the KOMPLEMENT series, designed to optimize wardrobe and closet organization.
