IDANÄS Side Table
Important Safety Information
⚠️ WARNING: This is a delicate table. Do not sit on the product.
⚠️ WARNING: Do not place heavy objects on this product. The maximum load capacity is 20 kg (44 lb).
Parts List
| Part | Quantity | Part Number |
|---|---|---|
| Dowel | 12x | 101345 |
| Screw | 4x | 100211 |
| Screw | 4x | 100212 |
| Cam Lock Screw | 8x | 118331 |
| Handle/Lever | 1x | 100001 |
| Cam Lock | 4x | 106720 |
| Cam Lock Housing | 4x | 119253 |
| Cam Lock Housing | 4x | 118137 |
| Dowel | 6x | 104171 |
| Bolt/Screw | 4x | 10051660 |
| Nut/Connector | 4x | 10075382 |
| Foot/Base | 4x | 112357 |
| Base Plate | 4x | 10053816 |
Assembly Instructions
- Step 1: Prepare the frame pieces. Attach the four feet (part 112357/10053816) to the bottom of the two frame pieces using screws.
- Step 2: Insert eight cam lock screws (part 118331) into the designated holes on the frame pieces.
- Step 3: Attach the two side support bars to the frame pieces. Ensure correct orientation; some bars may be marked with an 'X' indicating they should not be used.
- Step 4: Insert two cam locks (part 106720) into the holes on the side support bars and turn them clockwise to secure the bars to the frame. Repeat for the other side.
- Step 5: Insert four dowels (part 101345) into the holes on the top of the frame pieces. Attach the two horizontal support pieces to the frame using screws.
- Step 6: Insert two cam locks (part 106720) into the holes on the horizontal support pieces and turn to secure. Repeat for the other side.
- Step 7: Insert four dowels (part 101345) into the holes on the top of the frame pieces. Insert four screws (part 100211/100212) into the corresponding holes.
- Step 8: Insert two cam lock housings (part 119253/118137) into the side panels and turn to lock. Insert two cam locks (part 106720) into the top frame and turn to lock.
- Step 9: Attach the legs to the frame. Insert six dowels (part 104171) into the frame and then attach the legs, securing them with the dowels. Ensure correct orientation, as shown with a 'X' indicating incorrect placement.
- Step 10: Place the bottom shelf into the frame, aligning it with the pre-drilled holes.
- Step 11: Attach the shelf supports using four bolts/screws (part 10051660/10075382).
- Step 12: Insert four cam locks (part 106720) into the shelf supports and turn to secure the shelf.
- Step 13: Insert four dowels (part 101345) into the top frame. Secure the top frame with screws.
- Step 14: Place the tabletop onto the assembled frame, aligning it with the dowels and screw holes.
- Step 15: Secure the tabletop from underneath using four screws (part 100211/100212) and the handle/lever tool (part 100001).
© Inter IKEA Systems B.V. 2025
