Rockville RTB Series Wiring Guide
This document provides a wiring guide for the Rockville RTB Series High Power Vented Tubular Enclosures.
RTB65A Features
- Power connections
- High Level input / output
- RCA inputs
- 3.5mm Jack for MP3 input
- MP3 Volume control knob
- Low Pass Crossover control
- Full Range / Bass selector switch
- Power/Protect LED indicators
Wiring Diagram for RTB65A
Ground Connection: Connect to the ground terminal.
Power Connection: Connect to the positive (+) terminal of the battery.
Remote Connection: Connect to the remote output of the head unit.
High Level Input
High Level inputs, also referred to as speaker level inputs, allow connection when RCA outputs are unavailable on the receiver, common with stock head units. Signal from rear speakers connects here.
RCA/MP3 Input
Connect from any device with a 3.5mm output. Use either High Level inputs, RCA input, or 3.5mm input. Never use all three.
RTB80A Features
- Power connections
- High Level input / output
- RCA inputs
- 3.5mm Jack for MP3 input
- MP3 Volume control knob
- Low Pass Crossover control
- Full Range / Bass selector switch
- Power/Protect LED indicators
Wiring Diagram for RTB80A
Ground Connection: Connect to the ground terminal.
Power Connection: Connect to the positive (+) terminal of the battery.
Remote Connection: Connect to the remote output of the head unit.
High Level Input
High Level inputs, also referred to as speaker level inputs, allow connection when RCA outputs are unavailable on the receiver, common with stock head units. Signal from rear speakers connects here.
RCA/MP3 Input
Connect from any device with a 3.5mm output. Use either High Level inputs, RCA input, or 3.5mm input. Never use all three.
RTB10A Features
- High Level input
- Bass Remote (connect via RJ45 cable)
- RCA inputs
- Gain control (regulates volume input to pre-amp stage)
- Low Pass Crossover control
- Adjustable Bass control
- Power/Protect LED indicators
- Power connections
- Fuse
Wiring Diagram for RTB10A
Bass remote: Connect dash mounted bass remote (included) via RJ45 cable.
Ground Connection: Connect to the ground terminal.
Power Connection: Connect to the positive (+) terminal of the battery.
Remote Connection: Connect to the remote output of the head unit.
High Level Input
High Level inputs, also referred to as speaker level inputs, allow connection when RCA outputs are unavailable on the receiver, common with stock head units. Signal from rear speakers connects here.
RCA Input
Connect directly to your head unit's RCA outputs. Use either High Level inputs or RCA input. Never use both.
RTB12A Features
- High Level input
- Bass Remote (connect via RJ45 cable)
- RCA inputs
- Gain control (regulates volume input to pre-amp stage)
- Low Pass Crossover control
- Adjustable Bass control
- Power/Protect LED indicators
- Power connections
- Fuse
Wiring Diagram for RTB12A
Bass remote: Connect dash mounted bass remote (included) via RJ45 cable.
Ground Connection: Connect to the ground terminal.
Power Connection: Connect to the positive (+) terminal of the battery.
Remote Connection: Connect to the remote output of the head unit.
High Level Input
High Level inputs, also referred to as speaker level inputs, allow connection when RCA outputs are unavailable on the receiver, common with stock head units. Signal from rear speakers connects here.
RCA Input
Connect directly to your head unit's RCA outputs. Use either High Level inputs or RCA input. Never use both.
General Features
- High Power Woofer in Vented Tubular Enclosure
- Rear Aero Vent Bass System
- Integrated, Built-in RMS CEA Rated Amplifier
- Speaker Level and RCA Line-Level Input
- Adjustable Bass Crossover
- Adjustable Dashboard Bass Remote Control (RTB10A & RTB12A only)
- Molded Steel Woofer Grills
- Four Steel Mounting Brackets + Two Canvas Straps with Velcro Fasteners
- Durable Aviation Grade Tweed Carpet
- Custom Embroidery
Specifications
RTB12A Specifications
- Power: 300 Watts RMS, 600 Watts Peak
- Frequency Response: 30Hz - 200Hz
- Sensitivity: 111dB
- Height: 12.75″ (323.85mm), Length: 22.83″ (529.84mm)
RTB10A Specifications
- Power: 250 Watts RMS, 500 Watts Peak
- Frequency Response: 30Hz - 200Hz
- Sensitivity: 108dB
- Height: 10.75″ (273.5mm), Length: 20.86″ (529.84mm)
RTB80A Specifications
- Power: 200 Watts RMS, 400 Watts Peak
- Frequency Response: 30Hz - 200Hz
- Sensitivity: 105dB
- Height: 8.75″ (202.25mm), Length: 19″ (482.6mm)
RTB65A Specifications
- Power: 150 Watts RMS, 300 Watts Peak
- Frequency Response: 30Hz - 200Hz
- Sensitivity: 102dB
- Diameter: 7.25″ (184.15mm), Length: 15.75″ (400.5mm)
Troubleshooting
| PROBLEM | SOLUTION |
|---|---|
| No power | 1. Check ground, power, and remote connections. 2. Check fuse. 3. Check head unit (remote voltage). |
| No Sound | 1. Check all input connections (RCAs/high level inputs). 2. Check ground, power, and remote connections. 3. Check head unit (settings/connections). |
| Output sounds distorted | 1. Check gain settings. 2. Check bass boost settings. 3. Check head unit (settings/connections). |
For more information, visit RockvilleAudio.com.
© 2017 ROCKVILLE. Features and specifications are subject to change without notice.
