Fantech EOS PRO WGP15 Wireless Multi-Platform Gamepad

Introduction

Thank you for purchasing the Fantech EOS PRO WGP15 Wireless Multi-Platform Gamepad. This gamepad features anti-drift technology achieved through the use of Hall Effect sticks & triggers. Additionally, the EOS PRO features an interchangeable D-Pad & thumbsticks with rear macro paddles for easy gameplay. Experience the next level of gamepads!

Technical Specifications

• Connectivity: BT 5.0, StrikeSpeed Wireless, Wired
• Face Button Type: Membrane
• Total Number of Keys: 22
• Battery: 600mAh (Up to 18 hours usage)
• Charging Time: Approx. 3 hours
• Turbo: Yes (3 level adjustable modes)
• Rumble: Yes (4 level adjustable Rumble)
• Voltage/Current: 3.7V/125mA
• Programmable Buttons: 12
• Weight: 253g
• Wireless Range: ±10m
• Compatibility: PC/Steam, Switch, iOS, MacOS, tvOS, Android, Tesla Vehicles, Cloud Gaming/Game Pass

LED Indicator

The LED indicator status varies depending on the connected platform:

• Switch: LED 1 & 4 Bright Static Color
• PC: LED 1 & 3 Bright Static Color
• iOS/MacOS/tvOS: LED 1 & 2 Bright Static Color
• Android: LED 2 & 3 Bright Static Color

How to Connect

Android Connection

To connect to Android (version 10.0 or above): Ensure the gamepad toggle is switched to Android mode. Open Bluetooth on your Android device and press the sync button on the gamepad. It will appear as "Fantech EOS PRO". Press to start pairing. If not connected, LEDs 2 & 3 will blink. If connected, LEDs 2 & 3 will be a bright static color.

iOS Connection

To connect to iOS (version 13.0 or above): Ensure the gamepad toggle is switched to iOS mode. Open Bluetooth on your iOS device and press the Sync button on the gamepad. It will show as "Xbox Wireless Controller". Press to start pairing. If not connected, LEDs 1 & 2 will blink. If connected, LEDs 1 & 2 will be a bright static color.

Note: Controller only supports Apple devices in iOS 13.0 or above, as well as Apple Store games. Currently, the controller does not support touch, six-axis, vibration, while in-use with phones.

PC & Tesla Vehicles Connection

Connect the gaming controller to your PC by inserting the USB receiver or Type-C cable into your PC's USB port. Switch the toggle to Windows mode. If not connected, LEDs 1 & 3 will blink. If connected, LEDs 1 & 3 will be a bright static color.

Switch Connection

To connect to Switch, ensure the toggle is switched to Switch mode and press the sync button. The gamepad will automatically connect to your Switch. If not connected, LEDs 1 & 4 will blink. If connected, LEDs 1 & 4 will be a bright static color.

How to Use

Turbo Mode

Hold the Turbo button, then press another button to assign it. Pressing again triggers Auto Turbo Mode. To clear the Turbo effect, hold the Turbo button for 5 seconds. Adjust Turbo speed by holding the Turbo button and moving the right analog stick up (increase speed) or down (decrease speed).

Lighting Mode

Adjust lighting mode by pressing the "+" button and left on the D-pad (options: Running RGB Mode, Breathing Mode, Static Mode, Lighting Off). Adjust lighting brightness by pressing the "-" button and up on the D-pad. To turn off ABXY lights, hold L1+R1 for 5 seconds. To turn off analog stick lights, hold L2+R2 for 5 seconds.

Customizable Rear Triggers

To assign a macro: Press and hold the Turbo button and the Rear Paddle (left or right). LED 2+3 will blink, indicating readiness for input. Press the button to assign, then press the Rear Paddle again to finish recording. To erase the macro, press the Turbo button and Rear Paddle again. You can record up to 21 buttons. Recording stops automatically if no input is detected for 30 seconds.

Trigger Locks

Instantly reduce the trigger pull for faster in-game response time by sliding the built-in locks.

Rumble Mode

Adjust rumble intensity by holding the Turbo button and pushing the left analog stick up & down. Pushing up increases rumble power; pushing down decreases it. There are 4 levels of rumble: 100%, 70%, 30%, 0%.

Interchangeable Thumbsticks

Control your games your way! Simply pull off the thumbsticks to replace them with higher or lower size, to fit your needs!

Interchangeable D-PAD

Take control of your favorite games with precision by swapping out the D-PAD to suit your needs! Just lift up, and replace!

Troubleshooting

A. Gamepad not recognized/not found/not connected

• Check the gamepad connection.
• Check for USB port problems, or change to another USB port.
• Check the Gamepad driver was installed correctly. (If not, please unplug and restart the computer.)
• Press the Home button for 10 seconds to activate reset factory mode.

B. Gamepad not working in the game

• Be aware that not all games support gamepads.
• Check the game's settings options for controller configuration.

C. No vibration

• Check that the driver was installed correctly.
• Check that the game supports vibration.

D. Charging Indicator Light

• The 1-4 LED indicator light will flash when charging.
• When the battery power is low, the indicator lights will blink, and the gamepad will be unable to be used until it is charged.
• If the gamepad is not in use, the charging time will be around 3.5 to 4.5 hours. When the battery is full, the charging indicator light will turn off.
• While using the gamepad, the LED will flash slowly to indicate charging, and when the battery is full, the LEDs will turn to a solid color.
• To check the battery, press the Turbo button & "-" button. The lights will shine, depending on the amount of charge left. If it shows all lights (1, 2, 3, 4), the gamepad is 76%-100% charged. If it shows 3 lights (1, 2, 3), it is 51%-75%, while 2 lights (1, 2) means 26%-50%, and 1 light (1) is 1%-25%.

FCC Caution

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• -Reorient or relocate the receiving antenna.
• -Increase the separation between the equipment and receiver.
• -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• -Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.