Technical Specifications
- Model: WGP15V2
- Number of Buttons: 22
- Connectivity: StrikeSpeed Wireless, BT5.0, Wired
- Stick Type: Hall-Effect
- Trigger Type: Hall-Effect
- Main Button Type: Membrane
- D-pad Type: Membrane
- Turbo Mode: Yes
- Vibration: 4-level adjustable
- Macro Buttons: 12
- Polling Rate: 1000 Hz (Wired & Wireless)
- Battery Capacity: 1000 mAh (Li-ion)
- Battery Life: Up to 26 hours
- Dimensions: 156 × 105 × 59 mm
- Weight: 272 ±3 g
- Consumption: 3.7V – 125 mA
- Compatibility: Windows 7 or newer, Switch, iOS, MacOS, tvOS, Android
Product Overview
The controller features a symmetrical design with two analog sticks, a D-pad, face buttons (A, B, X, Y), shoulder buttons (LB, RB, LT, RT), a Home button, Start, Select, and Turbo buttons. It also includes two rear paddle buttons, a platform toggle, a USB-C port ? for charging and wired connection, and a 3.5mm audio jack ?. A trigger lock mechanism is present on the shoulder buttons.
Labeled Parts:
- A: Left Analog Stick
- B: Right Analog Stick
- C: Directional Pad (D-pad)
- D: Face Buttons (A/B/X/Y)
- E: Select Button
- F: Start Button
- G: Turbo Button
- H: Home Button
- I: Snap Button
- J: Left Bumper
- K: Sync Button
- L: Right Bumper
- M: Right Trigger
- N: Left Trigger
- O: USB-C Port
- P: Trigger Lock
- Q: Right Rear Paddle
- R: Left Rear Paddle
- S: Platform Toggle
- T: 3.5mm Jack
How to Connect
Wired Connection
Connect the controller to your device (PC, Nintendo Switch) using the USB-C cable plugged into the USB-C port (O).
Wireless Connection
2.4GHz Wireless: Plug the included USB dongle into your PC, NS, or Android device. The controller will connect wirelessly.
Bluetooth Wireless: Enable Bluetooth on your device (NS, Android, iOS/macOS/tvOS). On the controller, press and hold the Sync Button (K) until the indicator flashes, then select the controller from your device's Bluetooth menu for pairing.
Features
Trigger Lock
Instantly reduce trigger travel for faster in-game response by moving the built-in lock switches on the shoulder buttons.
Gamepad Calibration
To calibrate sticks and triggers, press the combination: [Turbo Button] + [Home Button] + [Start Button]. After calibration is complete, press the [Select Button] to confirm and exit.
Backlighting Mode
1. To change the backlighting mode, press [Start Button] + Left (D-pad).
2. To change brightness, press [Select Button] + Up/Down (D-pad).
3. There are 4 backlighting modes: RGB Flow, Wake-up Mode, Breathing Mode, Static Mode. In Static mode, press [Start Button] + Right (D-pad) to cycle through colors.
Left Stick / D-pad Function Swap
To swap the function of the Left Analog Stick to the D-pad, double-press the [Share Button]. To return the stick to its original function, double-press the [Share Button] again.
Swappable D-pad
Achieve maximum control in your favorite games with the swappable D-pad. Simply lift the element and replace it with the one that best suits you!
Swappable Sticks
Control your games your way! Simply remove the analog sticks to replace them with taller or shorter options according to your needs!
LED Indicator
The LED indicator shows connection status for PC ?, Switch ?, Android ?, and iOS/macOS/tvOS ??.
Vibration Mode
You can adjust the vibration intensity by holding the [Turbo Button] and moving the Left Analog Stick up or down. There are 4 vibration levels (100%-70%-30%-0%).
Turbo Mode and Auto-Fire Mode
1. To activate Turbo mode, hold the [Turbo Button] and press the desired button on the face panel.
2. Repeat step 1 to enable Auto-Fire mode.
3. To change the Turbo speed, hold the [Turbo Button] and move the Right Analog Stick up or down.
4. To cancel Turbo mode, hold the [Turbo Button] for 5 seconds.
Turbo mode is available for the following buttons: Face buttons, LT, RT, RB, LB.
Macro Mode
1. Press and hold the Macro button (rear button, left or right) you wish to assign until indicators 2 and 3 light up.
2. Press the button you want to assign, then press the Macro button again to finish recording.
3. To clear a macro, press and hold the Macro button and the assigned rear button again.
* You can record up to 63 button presses.
* If no button is pressed for 5 minutes during recording, the macro recording will stop automatically.
Support and Downloads
For further parameter adjustments, visit www.fantechworld.com and download the software (if available).
If you have any questions or need assistance with your product, please visit support@fantechworld.com or the Fantech World website.
Join the Fantech Discord Community.
