Puffco Pivot Glass Adapter Instruction Manual

What's Inside

The Puffco Pivot Glass Adapter package includes:

• Pivot Glass Adapter
• Pivot 3D Chamber (installed)
• 14 mm Glass Joint (installed)
• 10 mm Glass Joint

The adapter is designed to connect your glass piece to the Puffco Pivot device, offering versatility with both 14mm and 10mm glass joint sizes.

How to Use

1. Attach the Glass Adapter to the Pivot base in the same manner you would attach the Pivot 3D Chamber + Mouthpiece. Twist firmly to ensure a complete fit.

   Diagram: Shows attaching the glass adapter to the base.

2. Choose the 10mm or 14mm Glass Joint to use. To swap, simply remove and reinsert the desired joint.

   Diagram: Illustrates the 10mm and 14mm glass joints.

3. Hold the chamber cap open and load your concentrate with a loading tool or Hot Knife.

   Diagram: Shows loading concentrate into the chamber.

4. Gently place the glass joint onto your glass piece.

   Diagram: Depicts placing the glass joint onto a glass piece.

5. Single-click to toggle through heat settings, double-click to initiate the heat cycle.

   Diagram: Shows a hand interacting with the device, indicating single and double clicks for heat control.

Cleaning

Glass Adapter

For a deep clean, remove the 3D Chamber and Glass Joint from the Glass Adapter.

Submerge all components in 90%+ isopropyl alcohol for 20 minutes. After removing from alcohol, place components upside down and let air-dry completely before reattaching.

DO NOT rinse the 3D Chamber with water.

Diagram: Shows the glass adapter, chamber, and joints being disassembled for cleaning.

For how-to videos and helpful tips, visit Puffco.com/support.

Tips and Tricks

How to Remove/Reinsert the 3D Chamber

Remove the 3D Chamber from the Pivot Mouthpiece by opening the top and gently pushing the metal chamber up from the bottom with a soft tool, like the silicone end of a Hot Knife.

General Warnings

• Do not overfill the chamber.
• Use upright and inhale gently.
• Strong inhales may cause spillage and suboptimal vapor.
• Do not use a metal or sharp object when pushing up on the 3D Chamber as this may cause damage.
• The chamber becomes hot while in use; use caution when handling.

Not for use with tobacco, nicotine-containing e-liquids, or any synthetic nicotine or nicotine substitute.

Please do not return your Pivot Glass Adapter to the store. Keep your proof of purchase.

@Puffco