Reebok i-Run S Treadmill
Model: i run s
Welcome and Product Overview
Dear Customer,
Reebok is pleased that you have chosen this Reebok Fitness Equipment. This quality product has been designed for in-home use and has been tested and certified according to the European Norm EN 957-1/6. Please carefully read the instructions prior to assembly and first use, and be sure to keep the instructions for reference and maintenance.
We wish you lots of success and fun while training.
Your Reebok - Team
Warranty Information
Limited Warranty – UK Only
RFE International Ltd. (RFE) warrants this product to be free from defects in workmanship and material, under normal use and service conditions, for a period of two (2) years for parts and labor. This warranty extends only to the original purchaser. RFE's obligation under this warranty is limited to replacing or repairing, at RFE's option, the product through one of its authorized service centers. All repairs for which warranty claims are made must be pre-authorized by RFE.
This warranty does not extend to any product or damage to the product caused by or attributed to: freight damage, abuse, misuse, improper or abnormal usage, repairs not provided by a RFE authorized service center, products used for commercial or rental purposes, or products used as store display models. No other warranty beyond that specifically set forth above is authorized by RFE.
RFE is not responsible or liable for indirect, special or consequential damages arising out of or in connection with the use or performance of the product or damages with respect to any economic loss, loss of property, loss of revenues or profits, loss of enjoyment or use, costs of removal, installation or other consequential damages of whatsoever nature.
The warranty extended hereunder is in lieu of any and all other warranties, and any implied warranties of merchantability or fitness for a particular purpose are limited in their scope and duration to the terms set forth herein.
This warranty gives you specific legal rights.
Customer Service
To best support you in case of problems with your product, please quote the product Model Name and Serial Number. These can be found on the sticker underside your product.
Model name: [Model Name Input]
Serial number: [Serial Number Input]
Waste Disposal
Reebok products are recyclable. At the end of its useful life, please dispose of this article correctly and safely (local refuse sites).
Contact Information
RFE INTERNATIONAL LTD
THE PERFORMANCE CENTRE
MAIDSTONE RD
KINGSTON
MILTON KEYNES MK10 OBD
Head office tel: 0044 (0) 1908 793020
Head office fax: 0044 (0) 1908 793021
e-mail: info@rfeinternational.com
Technical Support:
tel: 0044 (0) 800 440 2459
e-mail: techsupport@rfeinternational.com
Advice
The owner's manual is only for customer reference. Reebok cannot be held responsible for mistakes occurring due to translation or change in technical specification of the product.
Precautions
Before assembling or using the treadmill, please read the following instructions carefully. They contain important information for use and maintenance of the equipment as well as for your personal safety. Keep these instructions in a safe place for maintenance purposes or for ordering spare parts.
- Product Scope: This product is made for home use only and tested up to a maximum body weight of 100 kilograms.
- Product Performance: This treadmill is tested to the European Standard EN 957-1/6 HB. The equipment is not suitable for therapeutic training.
- Noise Compliance: This treadmill meets the requirements of the noise pollution standards. The noise creation of the treadmill is under 70db.
- Product Maintenance: For keeping the run quality, use the provided silicon spray every month or after a working time of 100 kilometers between the belt and the running surface.
- Product Maintenance: Search for noisy parts. If you notice unusual noises, like grinding or clacking, try to locate it and have it repaired by a professional. Make sure the treadmill is not used until after repairs have been made.
- Product Feature: The speed can be changed by the computer.
- Use Safety: The function of the immobilization method is to prevent unauthorized use. This can be accomplished by removing the Safety Key from the console, unclipping it from the cord, and putting it in a non-accessible place.
- Emergency Dismount: Follow the steps listed below if you experience pain, feel faint, or need to stop your treadmill in an emergency situation: 1. Grip handrails for support. 2. Step onto the lateral platform. 3. Pull the Safety Key off the console.
- Emergency Stop: The Safety Key functions as the emergency stop. In an emergency situation, remove the Safety Key from the console, and the treadmill will come to a stop.
- Use Scope: The exerciser may not be used by persons with a weight of over 100 kg.
- Use Scope: This product is designed for physical exercise by adults. Please ensure that children only use it under adult supervision.
- Use Environment: Ensure that those present are aware of possible hazards, e.g., movable parts during training.
- Use Environment: Ensure that sufficient space is available to use the home exerciser with 2m long x 1m wide of clearance behind it and 1m of clearance for its flanks.
- Use Environment: Place the home exerciser on an even, non-slippery surface.
- Use Environment: Please ensure that liquids or perspiration never enter the electronics.
- Use Environment: Keep the equipment indoors, away from moisture and dust. Do not put the equipment in a garage, covered patio, or near water. If stored in this location, your warranty will be affected.
- Use Environment: The product is made for home use only. Warranty and manufacturer's liability do not extend to any product or damage to the product caused by commercial use.
- User Health: Consult your physician before starting any exercise programs to receive advice on the optimal training technique.
- User Health: Incorrect/excessive training can cause health injuries.
- User Health: If you feel sickness, chest pain, fits of dizziness, or breathlessness during your training, stop training immediately and consult your physician.
- Product Preparation: Ensure that training only starts after correct assembly, adjustment, and inspection of the home exerciser.
- Product Preparation: Follow the steps of the assembly instruction carefully.
- Product Preparation: Only use suitable tools for assembly and ask for assistance if necessary.
- Product Preparation: Only use original Reebok parts as delivered (see checklist).
- Product Preparation: Tighten all adjustable parts to prevent sudden movement while training.
- Product Preparation: We suggest using an equipment mat to prevent damage on the ground.
- Use Instruction: Please follow the advice as per correct training technique as detailed in the instructions.
- Use Instruction: Do not use the home exerciser without shoes or with loose fitting footwear.
- Use Safety: Be aware of the position and proper fixation of adjustable or moving parts while mounting or dismounting the home exerciser.
- Use Safety: Allow the belt to fully stop before dismounting.
- Use Safety: Pay attention: never insert any part of your body or clothes into the body of the treadmill while it is running or ready for use.
- Use Safety: Attach the emergency stop cord to your clothing before starting the treadmill. The Treadmill has an emergency stop mechanism for your safety. Before starting your workout, fasten the cord of the safety key to your clothing. If the treadmill has been shut down by removing the safety key, restart it by reinserting the key. An automatic restart of the treadmill belt does not occur. An unmonitored use of the treadmill by other people can be prevented by removing the safety key and keeping it safely hidden. In case of any emergency, hold on tightly to the handrail or handle bar with both hands and leave the treadmill by means of the anti-slipping surface of the lateral platform. Activate the emergence stop mechanism (safety cut-out).
- Use Safety: Please keep the safety key in a safe place and ensure that it is kept out of reach of children!
- Product Power Safety: The unit requires a power supply of 220V-230V / 50Hz. It should be connected to a safety socket with a dedicated 10A fuse. Before powering on and using the unit, confirm that the unit is plugged into the appropriate power supply (observe markings) and has been connected properly.
- Product Maintenance: If the equipment is in regular use, check all its components thoroughly every 1-2 months. Pay particular attention to the tightness of bolts and nuts. This applies especially to the securing bolts for saddle and handlebars.
- Product Maintenance: Incorrect repairs and structural modifications (e.g., removal or replacement of original parts) may endanger the safety of the user.
- Product Maintenance: Damaged components may endanger your safety or reduce the lifetime of the equipment. For this reason, worn or damaged parts should be replaced immediately, and the user should refrain from using the equipment until this has been done.
- Product Maintenance: Only use original Reebok replacement parts.
- Product Maintenance: Do not under any circumstances carry out electrical repairs or alterations yourself. Always ensure that such work is done by a properly qualified electrician/mechanic, or the advice of the Technical Support team is sought firstly.
- Product Maintenance: Disconnect the apparatus from the mains before doing repair, maintenance, or cleaning work.
Assembly Instructions
Check List
The following parts are included in the package:
- Part No. i-run-s-301: Fold up foot cover (2)
- Part No. i-run-s-302: Fold up foot (2)
- Part No. i-run-s-610: M8×130 screw (2)
- Part A: [Description of Part A]
- Part B: [Description of Part B]
- Part C: [Description of Part C]
- Part D: [Description of Part D]
- Part E: [Description of Part E]
Assembly Steps
- Attach part 610 (2x) and 302 (2x) to the main frame.
- Attach part 301 (2x) to the frame.
- Assemble the console support tubes.
- Attach the console to the support tubes. Ensure the handlebars reach their end position and are securely locked by first pulling back on them.
- Connect the console wiring.
- Secure the console assembly.
- Attach the side covers.
- Attach the front foot base.
- Fold the treadmill for storage.
- Transport the treadmill.
WARNING: Confirm the handlebars reach their end position and are securely locked by first pulling back on them.
Transport
The treadmill can be folded for easier transport. Follow the diagrams to fold and move the unit.
Correct Use
Correct Biomechanical Position
Please refer to the picture. Running straight on the treadmill is made easier by focusing on a fixed object in front of you in the room. Run as if you wanted to approach the object. Always keep a distance so you can reach the front handbar.
Major Exercise Type
This equipment focuses on your lower body and can train your thigh and shank muscles.
Important Note
Incorrect/excessive training can cause health injuries.
Exploded View and Parts List
Refer to the following diagrams for exploded views of the treadmill components and a detailed spare parts list.
Spare Part List
Part No. | Part Name | Quantity |
---|---|---|
i-run-s-101 | Console button plate | 1 |
i-run-s-102 | Console housing -upper | 1 |
i-run-s-103 | Console housing -lower | 1 |
i-run-s-104 | Safety Key base | 1 |
i-run-s-105 | Safety Key | 1 |
i-run-s-106 | Console housing holder-upper | 1 |
i-run-s-107 | Console housing holder-lower | 1 |
i-run-s-108 | Console fix lower cover | 1 |
i-run-s-109 | Computer main board | 1 |
i-run-s-110 | Button board | 1 |
i-run-s-112 | Pulse sensor wire-upper | 2 |
i-run-s-201 | Fold up grip | 1 |
i-run-s-202 | Upright -left | 1 |
i-run-s-203 | Upright -right | 1 |
i-run-s-204 | Heart rate handle bar | 1 |
i-run-s-205 | Pulse sensor set | 2 |
i-run-s-206 | Console support tube bushing | 2 |
i-run-s-207 | Handlebar cover right -inner | 1 |
i-run-s-208 | Handlebar cover right -outside | 1 |
i-run-s-209 | Handelbar cover left -inner | 1 |
i-run-s-210 | Handlebar cover left -outside | 1 |
i-run-s-213 | Upright lower cover | 2 |
i-run-s-214 | Side cover | 2 |
i-run-s-215 | Fold up grip conect rod | 2 |
i-run-s-216 | Spring | 2 |
i-run-s-217 | Upright lock pin | 2 |
i-run-s-218 | Fold up grip connector | 2 |
i-run-s-219 | Safety key wire -lower | 1 |
i-run-s-220 | 5 pin computer wire -lower | 1 |
i-run-s-221 | Fold up grip axle | 2 |
i-run-s-301 | Fold up foot cover | 2 |
i-run-s-302 | Fold up foot | 2 |
i-run-s-303 | Front foot base | 2 |
i-run-s-304 | Main frame | 1 |
i-run-s-305 | Rear transport wheel bracket | 1 |
i-run-s-306 | Rear transport axle cap | 1 |
i-run-s-307 | Transportation wheel | 4 |
i-run-s-308 | Belt cover- bottom | 4 |
i-run-s-309 | Rear roller tube | 1 |
i-run-s-310 | Rear roller shaft | 1 |
i-run-s-311 | Front roller tube | 1 |
i-run-s-312 | Front roller shaft | 1 |
i-run-s-313 | 9X30X2 Foam cushion | 8 |
i-run-s-314 | Side rail fix braket | 2 |
i-run-s-315 | Frame cross bar | 1 |
i-run-s-316 | Cross bar foam tube | 1 |
i-run-s-401 | Motor hood | 1 |
i-run-s-402 | DC driving Motor | 1 |
i-run-s-403 | Driving Belt | 1 |
i-run-s-404 | Motor holder | 1 |
i-run-s-405 | Motor holder bracket end cap -upper | 2 |
i-run-s-406 | Motor holder bracket end cap -lower | 2 |
i-run-s-407 | Front foot bracket | 1 |
i-run-s-408 | Motor holder bracket locate plate | 1 |
i-run-s-409 | Motor holder bracket base -left | 1 |
i-run-s-410 | Motor holder bracket base -right | 1 |
i-run-s-411 | Switch board | 1 |
i-run-s-412 | Switch | 1 |
i-run-s-413 | Switch board holder | 1 |
i-run-s-414 | Electric outlet | 1 |
i-run-s-415 | Electric outlet holder | 1 |
i-run-s-416 | Electric protector | 1 |
i-run-s-417 | PU cushion | 1 |
i-run-s-418 | Motor cover -lower | 1 |
i-run-s-419 | Transport wheel bracket | 1 |
i-run-s-420 | Main frame foot cover | 2 |
i-run-s-421 | Motor control board | 1 |
i-run-s-422 | Plastic insert | 17 |
i-run-s-423 | Transformer | 1 |
i-run-s-501 | Side rail | 2 |
i-run-s-502 | Rear end cap -left | 1 |
i-run-s-503 | Rear end cap -right | 1 |
i-run-s-504 | Running belt | 1 |
i-run-s-505 | Running deck | 1 |
i-run-s-506 | Side rail guider | 8 |
i-run-s-601 | M4x15 mm Screw | 23 |
i-run-s-602 | 3x8 mm Screw | 6 |
i-run-s-603 | M5X14 mm screw | 4 |
i-run-s-604 | M4X10 mm screw | 8 |
i-run-s-605 | Ø4x9x1 washer | 2 |
i-run-s-606 | M8x18 mm allen bolt | 2 |
i-run-s-607 | 4×30 mm screw | 2 |
i-run-s-608 | M8×50 mm bolt | 4 |
i-run-s-609 | M6 Nut | 8 |
i-run-s-610 | M8×130 screw | 2 |
i-run-s-611 | M6×45 mm screw | 3 |
i-run-s-612 | Ø13 washer | 3 |
i-run-s-613 | M12x25 mm cap allen head bolt | 2 |
i-run-s-614 | M6×15 screw | 4 |
i-run-s-615 | Ø8x17 washer | 10 |
i-run-s-616 | M4X35 screw | 2 |
i-run-s-617 | $9x35 washer | 2 |
i-run-s-618 | M8x13x8 nut | 3 |
i-run-s-619 | M8X78 bolt | 1 |
i-run-s-620 | M8X48 bolt | 1 |
i-run-s-621 | M10 Nut | 1 |
i-run-s-622 | M10X120 mm screw | 1 |
i-run-s-623 | $8 plate washer | 10 |
i-run-s-624 | Ø8 spring | 2 |
i-run-s-625 | M8×12 allen head bolt | 2 |
i-run-s-626 | M8 bump bolt | 2 |
i-run-s-627 | 4×19 Screw | 18 |
i-run-s-628 | M8 special bolt | 1 |
i-run-s-629 | Ø10.5 washer | 4 |
i-run-s-630 | M10×25 allen head bolt | 8 |
i-run-s-631 | M8×30 allen head bolt | 4 |
i-run-s-632 | Plastic insert | 14 |
i-run-s-633 | M8 Nut | 2 |
i-run-s-634 | Φ8Χ23Χ2 Washer | 4 |
i-run-s-635 | Φ8.2Χ15Χ1.5 Washer | 2 |
i-run-s-636 | Φ12Χ25Χ3 Washer | 2 |
i-run-s-637 | M10×30 Screw | 2 |
i-run-s-638 | Screw hole clip | 2 |
i-run-s-001 | Hardware Set | 1 |
i-run-s-002 | Computer Instruction | 1 |
i-run-s-003 | Assembly Instruction | 1 |