App Instructions - Take Photos/Videos
To capture photos and videos with your Holy Stone quadcopter, follow these steps:
- Turn on the quadcopter.
- On your phone, go to settings, select WIFI, and connect to "HolyStoneFPV***".
- Once connected, exit settings and open the 'Deerc FPV' App.
- Press the play button in the app to view real-time images from the quadcopter.
- To Take Photos: Tap the 'Take Photo' button.
- To Take Videos: Tap the 'Take Video' button.
All images and videos are saved to the camera's micro SD card. Ensure the card is inserted before flight. To access your files after flying, gently remove the SD card from the camera (Pic. 17) and insert it into a card reader connected to your computer. Files are saved in a folder named "Deerc FPV".
Tip: The red indicator light flashes quickly if the memory card is not inserted or is full. The video player must support AVI format.
Mobile Phone Control
You can control the quadcopter directly from the app using your mobile phone. For Gravity Sensor Mode, hold the phone horizontally. Always turn off the transmitter before controlling the quadcopter via your phone.
Mobile App Controls:
- Speed Mode
- Return Key
- Take Photo
- Take Video
- Folder
- Throttle Control
- Gravity Sensor Mode
- 3D Mode
- Normal Mode/Headless Mode
- Take Off/Landing
- Direction Control
- Console Display
- Emergency Stop
Common Problem and Solution Instruction
| THE PROBLEM | REASON | COUNTERMEASURES |
|---|---|---|
| The indication light is flashing and without reaction when operated. | 1. Frequency modulation between the quadcopter and remote control is not operated correctly. 2. Insufficient battery power. | 1. Refer to Preparation for taking off, and re-modulate the frequency. 2. Recharge the battery. |
| The blades turn, but the quadcopter can't take off. | 1. Insufficient battery power. 2. The blades distorted. | 1. Recharge the battery. 2. Replace the blades. |
| The quadcopter shakes hardly. | The blades distorted. | Replace the blades. |
| Using tuning functions, but the quadcopter still couldn't keep balance. | 1. The blades distorted. 2. The motor doesn't work properly. | 1. Replace the blades. 2. Replace the motor. |
| The quadcopter is out of control after crashing. | Three-axis acceleration sensor lost its balance after crashing. | Place the quadcopter on a level ground for 5-10 seconds. |
Spare Parts
- Blades
- Landing Gear
- Propeller Guard
- USB Cable
- Phone Holder
- Card Reader
- Screw Driver
- Battery
- FPV WIFI Camera
- Transmitter
Tips: Please contact Holy Stone for the purchase of replacement parts if additional ones are needed.
General Information
FCC Information
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide residential protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on the circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION! The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment.
FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference, including interference that may cause undesired operation. The distance between user and products should be no less than 20cm.
IC Notice
This device complies with Canada Industry licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference; and (2) this device must accept any interference, including interference that may cause undesired operation.
French Translation: Cet appareil est conforme aux CNR exemptes de licence d'Industrie Canada. Son fonctionnement est soumis aux deux conditions suivantes : (1) Ce dispositif ne peut causer d'interférences ; et (2) Ce dispositif doit accepter toute interférence, y compris les interférences qui peuvent causer un mauvais fonctionnement de l'appareil.
RF Exposure
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
French Translation: Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.
How to Recycle This Product
The symbol on the product or its documentation indicates that it must not be disposed of with household waste. Uncontrolled waste disposal may harm the environment or human health. Please separate your device from other types of waste to recycle it responsibly. This will help to foster the sustainable re-use of material resources. Contact your retailer or local town hall to find out where and how the drone can be recycled.
Battery
WARNING: Failure to follow all instructions may result in serious injury, irreparable damage to the battery, and may cause fire, smoke, or explosion. Always check the battery's condition before charging or using it. Replace the battery if it has been dropped, or if there is an odor, overheating, discoloration, deformation, or leakage. Never use anything other than the approved LiPo charger for the battery. Always use a balancing charger for LiPo cells or a LiPo cell balancer. It is recommended to use only the charger provided with the product. The battery temperature must never exceed 60°C (140°F), otherwise the battery could be damaged or ignite. Never charge on a flammable surface, near flammable products, or inside a vehicle. Preferably, place the battery in a non-flammable and non-conductive container. Never leave the battery unattended during the charging process. Never disassemble or modify the housing's wiring, or puncture the cells. Always ensure that the charger output voltage corresponds to the voltage of the battery. Do not short-circuit the batteries. Never expose the LiPo battery to moisture or direct sunlight, or store it in a place where temperatures could exceed 60°C (e.g., a car in the sun). Always keep it out of reach of children. Improper battery use may result in fire, explosion, or other hazard.
Manufacturer Information
Manufactured by Xiamen Huoshiquan Import & Export CO., LTD
Room 703, No. 813-2 Xiahe Road, Siming District, XIAMEN, China
