Immax NEO RONDATE Zigbee 3.0 Smart Ceiling Light
Installation Manual
Model Numbers: 07024-15 (White), 07023-15 (Black)
Important Symbols and Warnings
- 01: [Indoor Use]
- 02: [Not for Wet Areas - Minimum 3m distance]
- 03: [Energy Efficiency Class F]
- 05: [Do Not Connect Directly to Mains]
- 06: [Not for Bathrooms/Damp Areas]
- 09: [Minimum 0.5m Ceiling Clearance]
- 19: [Requires Grounding]
- 22: [Suitable for Cable Diameter ±8mm]
- 45: [Use Appropriate Fixings]
- 47: [Electrical Connection]
- 48: [Do Not Touch Hot Surfaces]
Technical Parameters
| Protocol | Zigbee 3.0 |
| Material | Metal, Plastic |
| Dimensions | D15 x 10cm |
| Light Color | 3000K-6000K |
| Wattage | 12W |
| Luminous Flux | 840lm |
| Dimmable | Yes |
| Illumination Time | 50,000 hours |
| Power Supply Input Voltage | AC 100-240V 50-60Hz |
| CRI(Ra) | <80 |
| Compatibility | iOS, Android, Amazon Alexa, Apple Siri Shortcuts, Google Assistant, Philips HUE, TUYA, Tahoma, Lidl, Ikea |
| Warranty Period | 3 years |
Declaration of Conformity
The manufacturer IMMAX hereby declares that the radio equipment type 07023-15 / 07024-15 complies with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available on the following websites:
If you have any questions or need advice, please contact support@immaxneo.cz or support@immax.eu.
Installation Guide
Step 1: Ensure power is OFF. (Depicted by a hand holding a wire connector block, with arrows pointing down towards a terminal block labeled "OFF!!")
Step 2: Attach mounting brackets to the ceiling. (Depicted by ceiling with brackets.)
Step 3: Drill holes in the ceiling using a drill. (Depicted by a hand holding a drill.)
Step 4: Insert screws and wall plugs into the drilled holes. (Depicted by screws and wall plugs being hammered in.)
Step 5: Feed electrical wires through the ceiling opening. (Depicted by wires being fed through.)
Step 6: Mount the main light fixture onto the ceiling brackets. (Depicted by the main fixture being attached.)
Step 7: Attach the diffuser/cover to the main fixture. (Depicted by the diffuser being attached.)
Step 8: Connect the wires to the terminal block. Ensure power is ON. (Depicted by a hand connecting wires to a terminal block labeled "ON".)
Manufacturer and Compliance Information
ASEKOL: AK-016010, WEEE-Reg.-No. DE 88927148
Manufacturer/Importer: IMMAX, Teslova 1179/2, 702 00 Ostrava, EU | www.immax.cz
Designed in the Czech Republic, made in China.
Certifications: CE, RoHS Compliant, Recycling Symbol [WEEE], Crossed-out Bin Symbol [Dispose of properly].
