Manuals+

Ubiquiti G5 Pro Vision Enhancer Installation Guide

Introduction

This guide provides detailed instructions for installing the Ubiquiti G5 Pro Vision Enhancer security camera. It covers various mounting options, cable management, and final camera adjustments to ensure proper setup and functionality.

General Installation Notes

Ethernet Cable Requirements

Ensure the Ethernet cable has a diameter between 5mm and 6mm. The cable connector must be properly terminated without sharp bends (❌) or exposed, frayed wires (❌). Improper termination or cable damage can lead to connectivity issues. (✅)

Optimal Camera Placement and Rain Protection

For optimal performance and to prevent water ingress, ensure the camera is mounted at least 60cm (approximately 2 feet) from any adjacent walls or corners, whether on a wall or ceiling. (Diagrams show camera positioned ≥60cm from walls/corners.)

When installing outdoors, protect all cable connections from direct rain and moisture. Ensure the cable entry point is sealed and not exposed to precipitation. (A cloud with raindrops symbol indicates outdoor conditions. A checkmark shows a properly protected cable entry, while X marks show exposed cable entries.)

Installation Methods

Method A: Wall/Ceiling Mount (Cable Entry from Wall/Ceiling)

Tools Required:

Installation Steps:

  1. Marking: Use the mounting base as a template to mark the positions for the screw holes on the wall or ceiling.
  2. Drilling: Drill Ø6mm (Ø1/4") holes at the marked positions.
  3. Wall Plugs: Insert the provided wall plugs into the drilled holes.
  4. Cable Routing: Route the Ethernet cable through the center hole of the mounting base and then through the wall or ceiling.
  5. Attach Mounting Base: Secure the mounting base to the wall or ceiling using the provided screws.
  6. Connect Camera: Connect the Ethernet cable to the camera's port.
  7. Secure Camera: Align the camera with the mounting base and rotate it clockwise to lock it into place. Ensure the camera is fully seated and securely locked. (A padlock symbol indicates the locked position.)

Method B: Wall/Ceiling Mount (Cable Entry from Side)

Tools Required:

Installation Steps:

  1. Marking: Use the mounting base as a template to mark the positions for the screw holes. Mark a central hole for the cable entry.
  2. Drilling Cable Hole: Drill an Ø18mm (Ø11/16") hole for the Ethernet cable.
  3. Drilling Screw Holes: Drill Ø6mm (Ø1/4") holes for the mounting screws.
  4. Wall Plugs: Insert the provided wall plugs into the screw holes.
  5. Cable Routing: Route the Ethernet cable through the Ø18mm hole in the wall/ceiling and then through the side opening of the mounting base.
  6. Attach Mounting Base: Secure the mounting base to the wall or ceiling using the provided screws.
  7. Connect Camera: Connect the Ethernet cable to the camera's port.
  8. Secure Camera: Align the camera with the mounting base and rotate it clockwise to lock it into place. Ensure the camera is fully seated and securely locked. (A padlock symbol indicates the locked position.)

Method C: Pole Mount

Tools Required:

Installation Steps:

  1. Attach Pole Mount Bracket: Secure the pole mount bracket to the pole using the metal straps and a Phillips screwdriver. Tighten the straps firmly to ensure stability. (A padlock symbol indicates the tightened and secured state.)
  2. Cable Routing: Route the Ethernet cable through the pole mount bracket.
  3. Attach Mounting Base: Secure the mounting base to the pole mount bracket using the provided screws.
  4. Connect Camera: Connect the Ethernet cable to the camera's port.
  5. Secure Camera: Align the camera with the mounting base and rotate it clockwise to lock it into place. Ensure the camera is fully seated and securely locked. (A padlock symbol indicates the locked position.)

Camera Adjustment

  1. Unlock Camera: To adjust the camera's angle or orientation, rotate the camera counter-clockwise to unlock it from the mounting base. (An unlocked padlock symbol indicates this state.)
  2. Adjust Position: Manually adjust the camera to the desired viewing angle.
  3. Lock Camera: Once the desired position is achieved, rotate the camera clockwise to lock it securely in place. (A locked padlock symbol indicates this state.)

File Info : application/pdf, 1 Pages, 8.89MB

PDF preview unavailable. Download the PDF instead.

uaccg5enhancer qig-64ba36319f214

References

Adobe PDF library 17.00

Related Documents

Preview Ubiquiti UniFi Protect G5 Pro Installation Guide
Comprehensive installation guide for the Ubiquiti UniFi Protect G5 Pro surveillance camera, detailing component identification and various mounting scenarios for optimal deployment.
Preview Ubiquiti UniFi G5 Bullet Installation Guide
A comprehensive guide detailing the installation process for the Ubiquiti UniFi G5 Bullet security camera, including wall and pole mounting instructions, network connection, and software setup.
Preview Ubiquiti G5 PTZ Gang Box Mounting Plate Installation Guide
Step-by-step instructions for installing the Ubiquiti G5 PTZ Gang Box Mounting Plate, including required tools and parts.
Preview UniFi G5 Turret Ultra Camera: Technical Specifications and Features
Explore the detailed technical specifications of the UniFi G5 Turret Ultra camera, including its mechanical, optical, and video capabilities. Learn about its robust design, advanced imaging features, and system integration.
Preview Ubiquiti UniFi G6 PTZ Camera Installation Guide | Setup and Usage
Comprehensive guide for installing and setting up the Ubiquiti UniFi G6 PTZ camera, detailing network connections, system components, and mobile app integration.
Preview Ubiquiti Gang Box Mounting Plate Installation Guide
Comprehensive installation guide for the Ubiquiti Gang Box Mounting Plate, detailing steps for mounting compatible cameras like the G5 Turret Ultra, AI Turret, and AI Dome.
Preview Ubiquiti UniFi AI Pro Camera Installation Guide
A comprehensive guide to installing the Ubiquiti UniFi AI Pro camera, covering hardware components and step-by-step installation procedures.
Preview Ubiquiti UniFi G5 Dome Camera Installation Guide
Concise installation guide for the Ubiquiti UniFi G5 Dome camera, detailing mounting, cabling, and initial setup within the UniFi Protect ecosystem.