Ubiquiti UniFi AI Pro Installation Guide

Included Hardware

The following hardware components are included for installation:

• a: 1x Mounting bracket
• b: 1x Camera base
• c: 2x Wall anchors
• d: 2x M4 screws
• e: 1x Allen wrench
• f: 1x Circular mounting plate
• g: 1x Weather seal
• h: 2x M4 screws

Installation Steps

Follow these steps to install the UniFi AI Pro camera:

1. Step A: Mounting Preparation

   Attach the camera to the mounting bracket. See diagram A for visual guidance.

   [View Diagram A]

2. Step B: Cable Connection

   Connect the network cable to the camera. See diagram B for visual guidance.

   [View Diagram B]

3. Step C: Wall Mounting

   Secure the mounting bracket to the wall using appropriate hardware. See diagram C for visual guidance.

   [View Diagram C]

4. Step D: Pole Mounting (Optional)

   If mounting on a pole, use the provided pole mounting accessories. See diagram D for visual guidance.

   [View Diagram D]

5. Step E: Outdoor Installation (Rain)

   Ensure proper weather sealing for outdoor installations exposed to rain. See diagram E for visual guidance.

   [View Diagram E]

6. Step F: Outdoor Installation (Rain)

   Another view of outdoor installation with weather considerations. See diagram F for visual guidance.

   [View Diagram F]

7. Step G: Final Camera Attachment

   Attach the camera to the mounted bracket. See diagram G for visual guidance.

   [View Diagram G]

8. Step H: Final Connections

   Complete any necessary cable connections. See diagram H for visual guidance.

   [View Diagram H]

For detailed instructions and troubleshooting, please refer to the official Ubiquiti documentation at: https://dl.ui.com/qig/uvc-ai-pro/#index