FXLuminaire Wall Light Installation and Safety Guide (CP, LM, UN, PD)

Installation Guide

Step 1: Power Connection

Plug the transformer into a standard wall outlet (120V). ❌ Do not connect the fixture directly to the wall outlet. ✔️ Ensure the transformer is correctly plugged in.

Step 2: Voltage Check

Connect the transformer's output wires to a voltmeter. The voltmeter should read approximately 15V.

Step 3: Wire Connection

Connect the low-voltage wires from the transformer to the corresponding wires on the wall light fixture.

Step 4: Mounting

Securely mount the wall light fixture to the desired wall surface.

Step 5: Wire Termination

Ensure all wire connections are secure and properly insulated.

Step 6: Fixture Assembly

Attach the main body of the fixture to its mounting bracket.

Step 7: LED Board Connection

Connect the LED board to the fixture's wiring. For detailed LED board replacement, refer to specific guides: fxl.help/CPUNBoard (CP/UN) or fxl.help/LMPDBoard (LM/PD).

Step 8: Final Assembly

Attach any covers or lenses to complete the installation.

Important Safety Information

WARNING – To reduce the risk of FIRE OR INJURY TO PERSON:

Turn off/unplug and allow to cool before replacing lamp.
Lamp gets HOT quickly. Contact only switch/plug when turning on.
Do not touch hot lens, guard, or enclosure.
Keep lamp away from materials that may burn.
Do not touch the lamp at any time. Use a soft cloth. Oil from skin may damage lamp.
Do not operate the fixture fitting with a missing or damaged shield.

WARNING – Risk of Electric Shock

May be installed less than 5' (1.5 m) from a pool, spa, or fountain when used with a UL 379 listed transformer.
A fixture shall not use tungsten halogen lamps unless the fixture is marked for such lamps.
Supply connection and electrical components are located above ground level, except for secondary cord that is suitable for wet locations.

LOW-VOLTAGE CABLE SHALL:

Be protected by routing in close proximity to the fixture or fitting, or next to a building structure such as a house or deck.
Not be buried except for a maximum 6" (152 mm) in order to connect to the main low-voltage cable.
Have the length cut off so that it is connected to a connector within 6" (152 mm) from a building structure, a fixture, or fitting.

Technical Details and Compliance

Energy Efficiency Class

These products contain a light source of energy efficiency class: Class G: Luminaires using an integrated LED circuit board; Class F: Luminaires using a G4 LED lamp.

Certifications

UL Listed: CP, LM, UN, PD; UL-NOM Listed: CP, LM, UN; CE Certified: CP, LM, UN, PD.

FCC Compliance

This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, you are encouraged to try to correct the interference by taking one or more of the following measures: Reorient or relocate the receiving antenna; Increase the separation between the equipment and receiver; Connect the equipment into an outlet on a circuit different from that of which the receiver is connected; Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by Hunter Industries could void the user's authority to operate this device.

Online Resources

Voltage Drop Calculator: fxl.com/voltage-drop-calculator
General Support and Information: fxl.com/support

Manufacturer Information

Hunter Industries Inc.
1940 Diamond St.
San Marcos, CA 92078

For questions, contact your local distributor or visit the online support section at fxl.com/support.

	Building Your Landscape Lighting Business: A Comprehensive Guide A comprehensive guide for landscape lighting contractors, covering design techniques, fixture specification, lighting control systems, and business strategies from FX Luminaire.
	FXLuminaire Designer/Standard Down Light Installation and Safety Guide This guide provides installation instructions, circuiting guidelines, and essential safety information for the FXLuminaire Designer/Standard Down Light series, including VE, LE, VL, and LS models. Learn about transformer usage, low voltage cable requirements, and important precautions for safe operation.
	FXLuminaire VK LED Wall Light: Specifications, Features, and Ordering Guide Detailed specifications, features, materials, and ordering information for the FXLuminaire VK LED Wall Light, a modern, sleek, and durable recessed luminaire designed for landscape and architectural applications. Includes technical data, photometrics, and finish options.
	FXLuminaire MO Recessed Wall Light: Specifications, Ordering, and Photometrics Detailed specifications, ordering information, and photometric data for the FXLuminaire MO Recessed Wall Light. Features include die-cast brass construction, Lumileds LEDs, Luxor Technology compatibility, and various finishes. Ideal for landscape and architectural lighting.
	FXLuminaire Deck & Hardscape Lighting Product Guide Explore the FXLuminaire range of high-quality deck and hardscape lighting solutions, including wall lights, path lights, up lights, specialty lights, and down lights. Find detailed specifications and finishes.
	FXLuminaire XN-70 In-Grade Light Installation and Safety Essential safety and installation instructions for the FXLuminaire XN-70 In-Grade Light, designed for landscape and architectural lighting. Covers handling, electrical safety, and low-voltage cable guidelines.
	FX Luminaire Designer Collection & Luxor Controller for Landscape Lighting Explore the FX Luminaire Designer Collection of landscape and architectural lighting fixtures, featuring integrated LEDs and durable finishes. Learn about the Luxor Controller for advanced zoning, dimming, color control, and wireless integration.
	FXLuminaire Designer/Standard Wall Light Installation Guide (PO, MO, VO, CG) Comprehensive installation, circuiting, and safety guide for FXLuminaire Designer/Standard wall lights, including PO, MO, VO, and CG models. Provides step-by-step instructions, wiring guidelines, and essential safety precautions.

FXLuminaire Wall Light Installation and Safety Guide