Redragon BK-7114 Scissor Mechanism Slim Wireless Keyboard User Manual

Warranty Information

Within 18 months of purchase date, repair is guaranteed for failure due to electrical circuit problems. Damages from disassembly, hard impacts, submersion into water, improper current/voltage, or natural disasters are not covered. Consumable parts (foot pads) and spare parts are not included in the warranty.

I. Working Mode and Charging Indication

2.4G Mode

Turn the power switch to the 2.4G position. The [Mode LED] on the keyboard will slowly flash green. Insert the receiver into a USB port. The [Mode LED] will be normally on in green for about 3 seconds. To re-pair, hold [FN] + [4] for about 3 seconds; the [Mode LED] will rapidly flash green. Insert or replace the receiver; pairing will be successful.

Bluetooth Mode

Turn the power switch to the BT position.

1. Hold [FN] + [1/2/3] for about 3 seconds to enter pairing mode for Bluetooth channel 1, 2, or 3. The [Mode LED] will flash rapidly in blue/cyan/purple. The keyboard will broadcast as "BT5.0 KEYBOARD" and "BT3.0 KEYBOARD". Pair according to your device's instructions. Upon successful pairing, the [Mode LED] will be normally on in blue/cyan/purple and turn off after about 3 seconds.
2. Press [FN] + [1/2/3] to switch between the three paired Bluetooth channels.

II. Low Battery Indication / Working Current

Low Battery Indication

When the keyboard is in 2.4G or BT working mode, if the built-in battery is low, the [Mode LED] will flash slowly in red, indicating it's time to charge.

Charging

Connect the keyboard to a charging device using the attached [USB Type-C cable]. This keyboard supports charging via mobile power supply, external power adapter, or a valid USB port on a computer. During charging, the [Mode LED] will be normally on in red. It will turn normally on in green after charging is completed.

Warning: Use an external power adapter or mobile power supply with an output of 5V 2A or 5V 1A. Using sources outside this range may cause damage.

Working current: Less than 3.7mA in 2.4G or Bluetooth working mode.

III. Automatic Hibernation / Wake-up / Manual Power-off

1. When the keyboard is in 2.4G or BT working mode and is not used for about 3 minutes, it will enter a power-saving state. Press any key to wake it up.
2. To turn off the keyboard when not in use for a long time or when carrying it, switch the power to the OFF position.

IV. Functional Description of Other Keys

For WIN System

1. [FN] + [Win Key]: Locks and unlocks the Win key to prevent accidental triggering during gaming.
2. [FN] + F1: Decrease screen brightness
3. [FN] + F2: Increase screen brightness
4. [FN] + F3: Display multi-task window ([Alt] + [Tab])
5. [FN] + F4: Desktop ([Win] + [D])
6. [FN] + F5: Return
7. [FN] + F6: Search
8. [FN] + F7: Previous title
9. [FN] + F8: Play/pause
10. [FN] + F9: Next title
11. [FN] + F10: Mute
12. [FN] + F11: Decrease volume
13. [FN] + F12: Increase volume

For MAC System

1. F1: Decrease screen brightness
2. F2: Increase screen brightness
3. F3: Display multi-task window
4. F4: Call out [Siri]
5. F5: App exposé function
6. F6: Search
7. F7: Previous title
8. F8: Pause
9. F9: Next title
10. F10: Mute
11. F11: Decrease volume
12. F12: Increase volume

Other Key Combinations

• [FN] + [;] [←]: Scroll Lock
• [FN] + ['] [→]: Pause
• [FN] + [:] [↑]: HOME
• [FN] + ["] [↓]: END
• [FN] + [P]: Print Screen

[FN] + W: Exchanges the positions of English letters A/W/S/D and the four direction keys (←/↑/↓/→) in turn.

V. Description of Indicator Light Status

1. [Num Lock LED] and [Caps Lock LED]: Indicate Num Lock and Caps Lock status. When NUM or CAPS is ON, the corresponding LED will be normally on in red.
2. [Mode LED]: Indicates working mode (2.4G mode/BT mode) and low battery status.
3. [Charging LED]: Indicates charging status.

FAQ

1. Keyboard not responding: Please check if the keyboard's USB cable is correctly inserted into the USB port on the computer, or try another USB port.
2. Liquid spill: If liquid is spilled on the keyboard, unplug the USB cable immediately. Wipe off excess liquid and place the keyboard in a dry, ventilated area. Ensure it is naturally dried before the next use.

Battery Safety Guidelines

DO NOT replace the battery with a different model. DO NOT use this product if the battery shows signs of damage (tearing, deformation, leakage, or smell of electrolytic material). If battery material comes into contact with skin or eyes, seek immediate medical attention. DO NOT expose the battery to liquid, heat, electricity, or non-standard operating conditions. DO NOT remove the battery except for proper disposal and recycling according to local laws. DO NOT impact, bend, alter, disassemble, or damage the battery, as its contents are volatile, hazardous, and can be harmful.

⚠️ CAUTION: Failing to follow all safety guidelines may result in product damage, explosion, fire, and/or electric shock.

Compliance Statements

Canada Compliance

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation.

(French: Cet appareil contient des émetteurs / récepteurs exemptés de licence conformes aux RSS (RSS) d'Innovation, Sciences et Développement économique Canada. Le fonctionnement est soumis aux deux conditions suivantes: (1) Cet appareil ne doit pas causer d'interférences. (2) Cet appareil doit accepter toutes les interférences, y compris celles susceptibles de provoquer un fonctionnement indésirable de l'appareil.)

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.