VISCOJECT-BIO 2.2 Injector Set

Step 1: Prepare Cartridge with OVD

The image shows a close-up of the injector cartridge tip with a small amount of OVD (viscoelastic) being placed inside. It also illustrates placing a line of OVD into each channel of the cartridge. The instruction emphasizes not touching the tip of the cartridge.

Step 2: Position the IOL

This step depicts placing an intraocular lens (IOL) into the center of the open cartridge. The instruction guides the user to push down on the edges of the optic to ensure the haptics are correctly positioned under the cartridge ledges.

Step 3: Align Toric/Multifocal IOLs

For toric and multifocal IOLs, this image highlights the importance of noting the orientation holes and meridian marks on the lens and cartridge for correct alignment.

Step 4: Secure the IOL and Cartridge

The image shows how to maintain the IOL in place using folding forceps while simultaneously folding the cartridge. The instruction is to close the cartridge until a click is heard, indicating it is secured.

Step 5: Insert Cartridge into Injector

This step illustrates placing the prepared cartridge into the main injector body. The cartridge is moved forward until it is fully seated, preparing the lens for implantation.

Step 6: Inject the IOL

The final step shows the injector plunger being gently pushed downwards. The instruction specifies placing the bevelled edge of the plunger downward to inject the IOL.

Note

*Carl Zeiss Meditec recommends the use of ZEISS OVDs.

Manufacturer Information

Medicel AG
Dornierstrasse 11
9423 Altenrhein
Switzerland

Website: www.zeiss.com/injectors

Contact: www.zeiss.com/med/contacts

Regulatory and Disclaimer

CE 0482

Document reference: en-OUS_32_022_0179I CZ-II/2024

International edition: Only for sale in selected countries. The contents of the brochure may differ from the current status of approval of the product or service offering in your country. Please contact our regional representatives for more information. Subject to changes in design and scope of delivery and due to ongoing technical development. VISCOJECT is a trademark of Medicel. © Carl Zeiss Meditec AG, 2024. All rights reserved.