SKYJET Injector Set

Preparation and Use

1. Step 1: Check that the plunger is fully withdrawn and held by the safety clips.

2. Step 2: Insert the cassette into the injector following the arrows. Push all the way in until you hear a "click".

3. Step 3: Hold the breakable safety tab between thumb and index finger. Snap it in the clockwise direction. The tab breaks and releases the lens.

4. Step 4: Introduce viscoelastic into the hole on the back of the injector. Fill the first 3 mm of the injector nozzle up to the line.

5. Step 5: Gently arm the plunger to release it from its safety clips and slowly push to drive the lens into the injector nozzle.

6. Step 6: With the bevelled orifice facing downwards, insert the tip of the injector into the incision and inject the lens into the capsular bag.

Product Information

CE 0459

Product: SKYJET

Compatible IOLs: CT ASPHINA 603P, CT SPHERIS 203P