Manuals+

Everbilt Submersible Utility Pump

Quick Reference Guide

See instruction manual for complete instructional details.

Installation and Operation Instructions

  1. Attach a 1" garden hose to the discharge of the pump. If a smaller 3/4" hose is preferred, attach the threaded adapter to the pump discharge before attaching the hose.

  2. Install the pump on a firm, level base. Avoid pumping mud, rock, or other debris.

    Diagram shows pump placement with measurements: 1-1/2" clearance from the bottom, and 3/16" clearance from the side.

  3. The pump will need a minimum of 1-1/2" of water to prime. Once primed, the pump can remove water down to 3/16".

  4. Plug the pump in to a 115V GFCI Power Outlet.

    Diagram shows pump connected to a GFCI outlet.

  5. To avoid airlock, the pump must be sufficiently submerged before pumping. If the pump is not pumping, tilt the pump to release the air bubbles from the bottom, then return to the vertical position. Unplug the pump from its power source when finished pumping; do not let the pump run dry.

Models: SUP54-HD, Submersible Utility Pump

File Info : application/pdf, 1 Pages, 601.03KB

PDF preview unavailable. Download the PDF instead.

fda55aba-d36f-42cb-8245-20a606e93afc Adobe PDF library 16.03 Adobe Illustrator(R) 24.0

Related Documents

Preview Everbilt 2-in-1 Utility Pump Use and Care Guide
Comprehensive guide for the Everbilt 2-in-1 Utility Pump, covering performance, safety information, installation, care, and troubleshooting for both submersible and non-submersible applications.
Preview Everbilt 2-in-1 Utility Pump Quick Start Guide
A quick start guide for the Everbilt 2-in-1 Utility Pump (Model UTA02510), providing instructions for setup, operation, and safety in both English and Spanish.
Preview Everbilt Non-Submersible Water Transfer Pump Use and Care Guide
Comprehensive guide for the Everbilt Non-Submersible Water Transfer Pump, covering performance, safety, installation, operation, care, and troubleshooting. Includes specifications and warranty information.
Preview Everbilt 1 HP 4" Submersible Deep Well Pump Quick Start Guide
Quick start information and installation guide for the Everbilt 1 HP 4" submersible deep well pump (Model HDSUB10-102). Includes features, specifications, and installation recommendations.
Preview Everbilt Submersible Waterfall/Utility Pump Quick Reference Guide
A quick reference guide for installing and operating the Everbilt Submersible Waterfall/Utility Pump, including setup, priming, and troubleshooting tips.
Preview Everbilt HDSUB15-103 1-1/2 HP 4" Submersible Deep Well Pump Quick Start Guide
Quick start information guide for the Everbilt HDSUB15-103 1-1/2 HP 4" submersible deep well pump, detailing installation, assembly, features, and customer support contact information.
Preview Everbilt Submersible Sump Pump Quick Reference Guide
This guide provides essential steps for installing and operating an Everbilt submersible sump pump. It covers preparing the sump basin, connecting the discharge pipe with a check valve and vent hole, plugging into a GFCI outlet, testing the pump's operation with its float switch, and installing an optional basin cover. Refer to the full instruction manual for comprehensive details.
Preview Everbilt 4" Submersible Pump Quick Reference Guide
Quick reference guide for Everbilt 4" submersible pumps, covering wiring diagrams, connection types, and general pumping depth guidelines by horsepower. Includes electrical safety alerts and wiring instructions.