Everbilt HDSUB15-103 Quick Start Information Guide
Item #: 1011 701 881 | Model #: HDSUB15-103
1-1/2 HP 4" SUBMERSIBLE DEEP WELL PUMP
- 440' Max well depth, recommended operating range 250' - 400'
- 10 GPM max flow rate
- 3 wire pump connection
INSTALLATION / ASSEMBLY
Diagram Description: A vertical diagram illustrates a well system. At the top are labels "Ground Level" and "Top of Well". A well casing extends downwards. Inside the casing, a "Pump" is shown positioned 5 feet from the bottom. The water level is indicated with a label "15' to 20'" representing the depth of water above the pump.
Wiring Diagram Description: A schematic shows electrical connections. From a "TO BREAKER PANEL" which includes "GROUND" and an optional "DISCONNECT SWITCH", wires connect to a "PRESSURE SWITCH" and then to a "CONTROL BOX". The control box has terminals labeled "R Y B" and "GROUND". The "SUBMERSIBLE PUMP" is connected to the control box with specific wire color assignments noted: "YELLOW TO Y, RED TO R, BLACK TO B".
Installation Note: Pump should be installed 5' from the bottom of the well, with 15'-20' of water above the pump.
FEATURES
- 230 V pro-grade motor with lightning arrestor, built in lightning protection.
- Stainless steel end bells, screen & cable guard.
- Includes check valve built into pump's discharge head.
- Discharge dimensions: 1-1/4" FNPT.
- For additional instructions, please see the full installation guide.
Customer Support
Questions, problems, missing parts? Before returning to the store, call Everbilt Customer Service.
Hours: 8 a.m. - 6 p.m., EST, Monday - Friday
Phone: 1-844-883-1872
Website: HOMEDEPOT.COM
