User Manual

Warning!

Please read this user manual carefully. It contains important information regarding the safe installation and use of the device. Only persons who have read the manual should use the device. Keep the manual for future reference. The device is intended for use only as specified in this manual.

Unpack the device before starting up. Ensure the device is in working order after unpacking. Do not use a defective product; it must be repaired first. The product is designed for home and commercial use and must not be used for any other purpose.

DELTA-OPTI is not liable for damages resulting from failure to adhere to the rules in this manual. Following the safety rules for operation and maintenance ensures user safety and prevents device damage.

The manufacturer and supplier are not liable for any losses or damages, including financial or intangible losses, loss of profits, income, data, or pleasure from the use of the product or related products, whether indirect, incidental, or consequential. This applies to losses from quality deterioration, lack of operation, unavailability during repair, improper results, negligence, contract termination, or breach of warranty, even if the manufacturer or supplier was notified of the possibility of such damages.

Safety Measures

The device's design prioritizes safety. It must be protected against contact with caustic, staining, and viscous fluids.

The device is designed to restart operation automatically when power supply is restored after an interruption. Turn off the device before transporting it.

Before connecting to a power source, verify that the supplied voltage matches the rated voltage specified in the user manual.

Attention: Protections are recommended to safeguard the device against potential overvoltages. Surge protectors offer effective protection against accidental voltage surges exceeding the rated limits. Damages caused by voltages higher than specified in the manual are not covered by warranty.

Proper Product Disposal

The [crossed-out-waste-bin symbol] marking indicates that this product must not be disposed of with other household waste within the EU. To prevent potential harm to the environment and health from uncontrolled waste disposal, the product should be handed over for recycling to promote sustainable use of natural resources.

To return a worn-out product, use the designated collection and disposal system for this type of equipment or contact the seller from whom it was purchased. The product will be recycled in an environmentally friendly manner.

Important Usage Notes

Do not use the device if its power cord or plug is damaged, if the device malfunctions, or if it has been damaged or dropped. A damaged power cord or plug must be replaced by the manufacturer, a service center, or a qualified person to prevent electric shock hazards. Self-repair is not recommended for safety reasons.

This device is not intended for operation by persons (including children) with limited physical, sensory, or mental capabilities, or by inexperienced individuals, unless supervised by a person responsible for their safety or instructed by such a person.

Do not touch the plug with wet hands. To unplug, pull the plug itself, never the cable.

Use the device strictly according to its intended use described in this manual. Using accessories not recommended by the manufacturer may lead to fire, electric shock, or injuries.

The [high voltage warning symbol] marking indicates the presence of dangerous voltage within the device's cover, which may be hazardous to user's life and health.

Product Description

The ATLO-SW1-EWELINK controller enables wireless control of LED lighting via a dedicated application or a connected physical button. For optimal performance, the device requires connection to a Wi-Fi network with Internet access.

In addition to direct control, the device supports programming on/off schedules and linking to various system events. It allows for the creation of action scenarios involving other devices. Voice control is available through Amazon Alexa or Google Assistant, provided Internet access is established.

eWeLink is an international home automation platform connecting thousands of products from various manufacturers. The system supports popular communication protocols including Wi-Fi, Zigbee, and Bluetooth.

Attention: Device control and schedule settings are only possible when the device has Internet access.

Technical Specifications

Device Details and Connectors

The ATLO-SW1-EWELINK is a compact white plastic smart switch module. It features screw terminals for connections:

• L: Live/Line input
• N: Neutral input
• L1: Load output
• S1: Input for an external switch

A WPS (Wi-Fi Protected Setup) button is also present on the device, typically used for easy Wi-Fi connection setup.

The device is designed to be mounted, potentially with a bracket as shown in some illustrations.

Package Contents

The package typically includes the ATLO-SW1-EWELINK Smart LED Lighting Controller. Specific package dimensions and gross weight are listed as 0x0x0 mm and 0 kg in the documentation, which may indicate placeholder information or an omission in the provided data.