DELTA ATLO-AC-HW4A-TUYA Wireless PIR Detector User Manual

Warning!

Please read this user manual carefully as it contains important information regarding the safety of installation and use of the device. Only individuals who have read the user manual should operate the device. The manual must be kept for future reference. The device is intended for use only as specified in this manual. Unpack the device before starting up. After unpacking, verify the device is in working order. If the product is defective, it should not be used until repaired. The product is designed for home and commercial use and must not be used for any other purpose. DELTA-OPTI is not liable for damages resulting from failure to adhere to the rules in this user manual; therefore, it is recommended to follow the safety rules for operation and maintenance to ensure user safety and prevent device damage. DELTA-OPTI and its suppliers are not liable for any losses or damages, including financial or intangible losses, loss of profits, income, data, or enjoyment from the product or related products, whether indirect, incidental, or consequential. This applies to losses concerning: 1. Deterioration of quality or loss of product operation due to damage, or loss of access to the product during repair, leading to downtime, loss of user time, or business interruption; 2. Improper product operation results; 3. Losses and damages under any legal category, including negligence, contract termination, express or implied warranty, and strict liability, even if DELTA-OPTI or its supplier was notified of the possibility of such damages.

Safety measures:

Particular attention was paid to quality standards during the device's design to ensure operational safety is the primary factor. The device must be protected against contact with caustic, staining, and viscous fluids. The device is designed to restart operation automatically when power is restored after an interruption. Attention! Protections are recommended to safeguard the device from potential overvoltages in installations. Surge protectors effectively guard against accidental voltage spikes exceeding the rated levels. Damages caused by voltages exceeding those specified in the manual are not covered by warranty. Turn off the device before transporting it. Before connecting the device to a power source, verify that the supplied voltage matches the rated voltage specified in the user manual.

Proper product disposal:

The crossed-out waste bin symbol indicates that the product must not be disposed of with other household waste within the EU. To prevent potential environmental or health damage from uncontrolled waste disposal, hand it over for recycling to promote sustainable resource use. To return a worn-out product, utilize the designated collection and disposal systems or contact the seller from whom it was purchased for environmentally friendly recycling.

Product Description

This is a Digital Passive Infra Red (PIR) detector designed for ceiling mounting.

The device is compatible with the Tuya Smart application for mobile devices.

Tuya is a global home automation platform connecting thousands of products from various manufacturers, supporting popular communication protocols such as Wi-Fi, Zigbee, and Bluetooth.

Within the Tuya Smart application, the wireless PIR detector operates with two states: "Human status" (indicating human presence) and "No one state" (indicating no human presence). These states reflect the detection of movement within the sensor's coverage zone. "Human status" is activated upon detecting human movement, sending a notification to the Tuya application. If no movement is detected for 40 seconds, the detector transitions to "No one state", displaying "No one came" in the application. This state persists until movement is detected again, switching the status back to "Human status". It is not recommended to test the detector and application immediately after startup and configuration. The correct procedure involves leaving the detector's detection area for at least 50 seconds before commencing testing. After a status change, the device connects to the Wi-Fi network within 5 seconds.

Image Description: A white, circular wireless PIR detector with a USB port visible on the side.

Specifications

Product Details

Battery Compartment: Designed for 2 x 1.5V AAA batteries.

Image Description: The interior of the detector showing two AAA battery slots and mounting screws.

Package Contents

Image Description: Package contents include the detector, mounting screws, wall plugs, and a small tool.

Package Dimensions (L x W x H): 0x0x0 mm. Gross Weight: 0 kg.