Hoco HE-068 TWS Wireless Headset Instruction Manual

Headset Overview

Product Name: TWS wireless headset

Components:

• Headset
• Touch area: [touch-sensitive area on headset]
• LED: [indicator light on headset]
• Charging case
• LED: [indicator light on charging case]

Product Features

• Wireless Specification: Wireless V5.3
• Product Net Weight: 40g
• Protocols Supported: Headset, Hands-free, A2DP, AVRCP
• Transmission Range: 10m
• Transmission Frequency: 2.4GHz
• Charging Voltage: DC 5V
• Charging Case Charging Time: About 1.5 hours
• Talk Time/Music Time: 7h
• Standby Time: Above 120 hours
• Headset Battery Capacity: 40 mAh
• Charging Case Battery Capacity: 320 mAh

How to Use

1. After opening the charging case, turn on the headset. A tone will indicate that the left and right headsets automatically complete pairing.
2. Enable Wireless function on your mobile phone and connect to "HE-068". For the first-time use, you need to manually connect the device. A tone will sound upon successful connection.
3. When the charging case is charging, the white light flashes. The white light is always on when fully charged. When the cover is opened, the white and blue lights flash alternately when not paired, and the lights go out after pairing.

Headset Controls

Warning

• Do not expose the product to high temperatures, corrosive, or high-pressure environments.
• Do not attempt to disassemble the headset or replace any electronic components.
• If internal devices show signs of fluid leakage, stop using the product immediately.

Regulatory Information (Chinese):

低功率電波輻射性電機管理辦法

第十二條: 經型式認證合格之低功率射頻電機, 非經許可, 公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。

第十四條: 低功率射頻電機之使用不得影響飛航安全及干擾合法通信; 經發現有干擾現象時, 應立即停用, 並改善至無干擾時方得繼續使用。

前項合法通信, 指依電信法規定作業之無線電通信。

低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.