Hoco ES45 TWS Wireless Headset
Instruction Manual
Product Overview
Headset overview
- Touch area
- LED
- Charging case
- Power display
Image Description: A visual representation of the Hoco ES45 TWS wireless headset, showing the earbuds and the charging case. The headset is black and sleek, with a charging case that also houses the earbuds. An overview diagram points out the touch area, LED indicator, charging case, and power display on the headset and case.
How to Use
- After opening the charging case, the headset automatically turns on, accompanied by a tone. The left and right headsets automatically complete pairing.
- Enable Wireless function on your mobile phone and connect to "HOCO ES45". For the first time, you need to manually connect the device. A successful connection of "HOCO ES45" is accompanied by a tone.
Product Features
| Wireless specification | Wireless V5.0 |
| Product net weight | 37g |
| Protocols supported | Headset, Hands-free, A2DP, AVRCP |
| Transmission range | 10m |
| Transmission frequency | 2.4GHz |
| Charging voltage | DC 5V |
| Headset charging time | About 1 hour |
| Talk time/Music time | 3.5h |
| Standby time | Above 180 hours |
| Headset battery capacity | 30mAh |
| Charging case battery capacity | 320mAh |
Headset Controls
| Function | Operation |
|---|---|
| Play / Pause | Click the touch area (left and right headset) |
| Next track | Triple-click the right headset touch area |
| Prev song | Triple-click the left headset touch area |
| Wake up "Siri" | Long press the touch area 2S (left/right headset) |
| Answer / hang up | Click the touch area (left and right headset) |
| Reject | Long press the touch area 2S (left/right headset) |
| Sound volume + | Double-click the right headset touch area |
| Sound volume - | Double-click the left headset touch area |
| Turn off | Put in the charging case and close the cover / Long press for 5 seconds / 3 minutes without pairing and automatically shut down |
Warning
- Do not expose the product to high temperatures, corrosive or high-pressure environments.
- Do not attempt to disassemble the headset, or to replace any electronic components within it.
- If internal devices have fluid leakage, please stop use.
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
