be quiet! PURE BASE 501
USER MANUAL
Introduction
This document provides a 3-year manufacturer's warranty for the consumer, applicable to products purchased from authorized be quiet! dealers. Proof of purchase is required for warranty service. Please retain your original receipt. Manipulations, technical modifications, or damage due to mechanical force will void the warranty. Full warranty terms and conditions are available on the be quiet! website at bequiet.com under Service/Warranty Conditions. General Terms and Conditions of Business also apply.
Manufacturer's Details
Listan GmbH | Wilhelm-Bergner-Straße 11c | 21509 Glinde | Germany
Tel: +49 40 736 7686 - 44 | Fax: +49 40-7367686-69
Email: service@bequiet.com
Website: www.bequiet.com
UK Authorised Representative
ProductIP (UK) Ltd. | 8, Northumberland Av. London WC2N 5BY
Copyright
Reproduction, disclosure, publication, or storage of this documentation or its excerpts is prohibited without the prior written consent of Listan. be quiet! is a registered trademark of Listan GmbH. Other product and company names mentioned may be trademarks of their respective owners. Listan reserves the right to make changes and improvements to products without prior notice. Listan is not liable for data loss, income loss, or any damages arising from the use of this product. The content represents the status at the time of writing, and Listan assumes no liability for its correctness or completeness, except where mandated by applicable law.
Technical Data
Motherboard compatibility | ATX, M-ATX, Mini-ITX |
Case Type | Midi-Tower |
PSU | PS2 ATX (not included) |
Dimensions (L x W x H in mm) | 450 x 231 x 463 |
Material | Steel (SGCC), ABS plastic, tempered glass* |
Pure Base 501 Weight (kg) | 6.66 (net) / 7.83 (gross) |
Pure Base 501 Airflow Black Weight (kg) | 6.78 (net) / 7.98 (gross) |
Pure Base 501 Airflow White Weight (kg) | 6.82 (net) / 8.02 (gross) |
Pure Base 501 Airflow Window Black Weight (kg) | 7.16 (net) / 8.37 (gross) |
Pure Base 501 Airflow Window White Weight (kg) | 7.20 (net) / 8.40 (gross) |
I/O Panel | 1x USB 3.2 Gen. 2 Type C, 2x USB 3.2 Type A, HD Audio (combined), Reset button, Power button, HDD Indicator |
PCI Slots | 7 |
Drive Bays | up to 5x 2.5" (5 included) up to 2x 3.5" (2 included) |
Preinstalled fans | Front: 1x Pure Wings 3 140mm PWM Rear: 1x Pure Wings 3 140mm PWM |
Maximum fans (mm) | Top: 2x 140/2x 120 Front: 2x 140 / 3x 120 Rear: 1x 140/1x 120 |
Optional radiators (mm) | Top: 120, 240 Front: 120, 140, 240, 280, 360 Rear: 120, 140 |
Maximum Dimensions (mm) | CPU cooler: 178 PSU: up to 200 | 180 (with offset HDD Cage) GPU: up to 368 |
*window versions only • versions avec fenêtre seulement
Scope of Delivery
Part name | Quantity |
Zip Tie | 6 |
6#32 Screw | 13 |
M3 Screw | 12 |
HDD Screw | 8 |
Thumb Screw | 2 |
Standoff Wrench | 1 |
Standoff | 1 |
Vertical GPU Bracket (Top) | 1 |
PCle Slot Cover | 1 |
Vertical GPU Bracket (bottom) | 1 |
Velcro Tie | 4 |
Description of Parts
The following components are included in the PURE BASE 501:
- A: Window Side Panel*
- B: Side Panel
- C: PCI Express Bracket
- D: SSD Panel Slot Cover
- E: Pure Wings 3 Fan
- F: PCI Express Cover
- G: SSD Panel
- H: Bottom Dust Filter
- I: Top Cover
- J: SSD Bracket
- K: Front Dust Filter
- L: Double HDD Cage
- M: Case Front
*window versions only • versions avec fenêtre seulement
Fan and Radiator Compatibility
Fan Installation
The case supports the following fan sizes:
Position | Size (mm) |
Top | 2x 120/140 |
Front | 2x 140, 3x 120 |
Rear | 1x 120/140 |
Radiator Compatibility
The case supports the following radiator sizes:
Position | Size (mm) |
Top | 120, 240 |
Front | 120, 140, 240, 280, 360 |
Rear | 120, 140 |
Radiator Clearance
The PURE BASE 501 offers the following radiator clearance:
- Front: 240mm, 280mm, 360mm
- Top: 240mm
- Rear: 120mm, 140mm
Specific dimensions for clearance are indicated in the diagrams.
Installation Guides
Removing the Side Panel
To remove the side panel, locate the screws on the rear of the case, unscrew them, and slide the panel off.
Removing the Window Panel
For window versions, locate the screws securing the glass panel, unscrew them, and carefully remove the panel.
Removing the Top Cover
To remove the top cover, unscrew the fasteners on the rear and lift the cover off.
Removal and Installation of the Case Front
The front panel can be removed by pulling it gently from the bottom. To reinstall, align it with the top clips and push it into place.
Removing the Front Dust Filter
Gently pull the front dust filter outwards from the bottom edge.
Removing the Bottom Dust Filter
The bottom dust filter can be removed by sliding it out from the front of the case.
Installation of SSDs on the Panel
SSD mounting points are available on the SSD panel. Secure the SSDs using the provided screws.
Installation of SSDs on the Bracket
The SSD bracket can be mounted in various locations. Attach the SSDs to the bracket using screws.
Installing Drives into the HDD Cage
The HDD cage supports multiple drives. Insert drives into the cage and secure them with screws.
Installing the Power Supply
Mount the power supply unit in the designated bay at the bottom of the case and secure it with screws.
Installation of the Motherboard
Place the motherboard onto the standoffs inside the case and secure it with screws.
Installation of a Graphics Card
Install the graphics card into the appropriate PCIe slot and secure it with the case's retention mechanism.
Installation of a Graphics Card Vertically
Utilize the vertical GPU bracket and riser cable (sold separately) to mount the graphics card vertically. Follow the specific instructions provided with the bracket and riser cable.
Limited Warranty
This non-transferable warranty applies to newly purchased, unopened be quiet! products and is enforceable by the original consumer purchaser. Proof of purchase is required for warranty service. be quiet! does not provide warranty registration services.
Warranty Period
Parts and labor are warranted for the applicable warranty period from the date of purchase, which varies by model. Replaced products are warranted for the remainder of the original warranty period or thirty days, whichever is longer.
Exclusions
The warranty does not cover normal wear and tear, products modified without permission, defaced serial numbers, damage from accident, abuse, misuse, neglect, improper voltage, unauthorized modification, or failure to follow instructions. It also excludes damage from acts of nature (fire, water, lightning), unauthorized repairs, shipping/transport damage, and causes unrelated to manufacturing defects. Consumables like cartons, cases, batteries, and accessories are not covered. be quiet! does not warrant that the product will meet your specific requirements; it is your responsibility to determine suitability. Removal/installation charges, shipping charges, and incidental charges are not covered.
Exclusion of Damages
be quiet!'s sole obligation is to repair or replace a defective product. be quiet! is not liable for special, incidental, indirect, or consequential damages, including loss of profits, revenue, or data, interruption of service, or business loss, even if advised of the possibility of such damages.
Limitations of Implied Warranties
Implied warranties of merchantability or fitness for a particular purpose are limited to the duration specified in the warranty period. No other warranties, expressed or implied, are provided.
Local Law and Your Warranty
This warranty grants specific legal rights, and you may have additional rights under local law.
No Other Warranty
No be quiet! employee, dealer, or agent is authorized to modify this warranty.
Technical Support or Warranty Service
Refer to your product owner's manual or visit the Online Support section at www.bequiet.com.