be quiet! SHADOW BASE 800 FX USER MANUAL

Introduction

This document is the user manual for the be quiet! SHADOW BASE 800 FX PC case.

Warranty

be quiet! provides a 3-year manufacturer's warranty for consumers purchasing from authorized dealers. Proof of purchase is required for warranty service. Manipulations, technical modifications, or damage from mechanical force will void the warranty. Full terms and conditions are available on the be quiet! website under Service/Warranty Conditions. General Terms and Conditions of Business also apply.

Manufacturer Details

Listan GmbH | Wilhelm-Bergner-Straße 11c | 21509 Glinde | Germany

Contact information:

• Tel: 0049 40 736 7686 - 44
• Fax: 0049 40-7367686-69
• Email: service@bequiet.com
• Website: www.bequiet.com

UK Authorised Representative: ProductIP (UK) Ltd., 8, Northumberland Av. London WC2N 5BY

Copyright

Reproduction, disclosure, publication, or storage of this documentation or its excerpts is prohibited without prior written consent from Listan. be quiet! is a registered trademark of Listan GmbH. Other product and company names are trademarks of their respective owners. Listan reserves the right to make changes and improvements to products without prior notice. Listan is not liable for data loss, income loss, or any damages arising from the use of this documentation. The content represents the status at the time of writing.

Recycling Information: This device and its accessories are recyclable. Please dispose of them at designated collection points.

Specifications

Contents

Exploded View and Description of Parts

The PC case components are labeled for identification:

• A: Window Side Panel
• B: Side Panel
• C: Front Panel
• D: Front Dust Filter
• E: Bottom Dust Filter
• F: Mesh Panel Top
• G: PSU Shroud
• H: SSD Panel
• I: Light Wings / 140mm
• J: Airflow Cover PSU Shroud
• K: PCIe Bracket
• L: Double HDD Bracket
• M: Cable Management Bar
• N: SSD / HDD Bracket Rear
• O: PWM & ARGB Hub

Radiator Clearance

The case supports radiator installations with the following clearance dimensions:

• Top Radiator Support: Up to 420mm (59mm clearance)
• Front Radiator Support: Up to 420mm (39mm clearance)
• Rear Radiator Support: 120mm
• The diagram shows a 420mm radiator fitting at the top and a 360mm radiator fitting at the front, with specific depth measurements indicated.

Installation Procedures

This section details the installation of various components and parts.

Removing Panels

• Removing the Side Panel: The side panel is secured by screws, typically at the rear. Removing these screws allows the panel to be detached.
• Removing the Window Panel: Similar to the side panel, the window panel is usually secured by screws, allowing for its removal.
• Removing the Top Cover: The top cover is typically attached via clips or screws, allowing it to be lifted off.
• Removing the Front Dust Filter: The front dust filter can be accessed and removed, often by pulling it outwards from the front of the case.
• Removing the Bottom Dust Filter: The bottom dust filter is usually slid out from the front or bottom of the case.

Component Installation

• Installation of Additional Bottom Fan: Instructions show how to mount an additional fan at the bottom of the case, securing it with screws.
• Installation of the Double HDD Bracket: This guide explains how to install the double HDD bracket, especially when using larger radiators or PSUs. It involves securing the bracket with screws in designated locations within the case.
• Installation of Drives into the Single HDD Cage: This describes mounting HDDs or SSDs into a single drive cage, often involving sliding the drive into the cage and securing it.
• Installation of SSDs on the Panel: Instructions show how to mount SSDs onto specific panels within the case, using screws.
• Installation of SSDs on the Bracket: This details mounting SSDs onto a dedicated bracket, which is then installed into the case.
• Installation of HDDs on the Bracket: Similar to SSDs, this describes mounting HDDs onto a bracket and then installing the bracket into the case.
• Installing the ATX-Motherboard: This section illustrates placing and securing an ATX motherboard onto the motherboard standoffs within the case, using screws.
• Installing the E-ATX-Motherboard: Similar to ATX, this shows the installation process for a larger E-ATX motherboard.
• Installing a Graphics Card: This guide explains how to install a graphics card into a PCIe slot, securing it to the case.
• Installing a Graphics Card Vertically: This section details the process of installing a graphics card vertically, which may require a riser cable and a specific bracket.
• Installing the Power Supply: Instructions show how to mount the PSU into its designated bay at the bottom of the case and secure it with screws.
• Cable Management Bar: This describes the installation and use of a cable management bar to route and secure cables neatly.

Complete System

Illustrations show the fully assembled PC case, both from the front and rear perspectives, demonstrating the final build.

ARGB Modes and Colors

The SHADOW BASE 800 FX features ARGB lighting with various modes and color options. The table below outlines the available modes and their corresponding color settings:

Synchronization ARGB

This section explains how to synchronize the ARGB lighting. It involves connecting the ARGB components to the hub and potentially using software or a button on the case for control. A 3-second press is indicated for a specific function.

Limited Warranty

be quiet! warrants its new products to be free of defects resulting from faulty materials and manufacturing for the warranty period.

I. Applicability

This non-transferable warranty applies to newly purchased, unopened products and is enforceable by the original consumer purchaser. Proof of purchase is required. be quiet! does not offer warranty registration.

II. Warranty Period

The warranty period varies by product model and is stated in the user documentation, on the package, or listed separately. Replaced products are covered for the remainder of the original warranty period or thirty days, whichever is longer.

III. Exclusions

The warranty does not cover:

• Normal wear and tear.
• Products modified without permission, or with defaced/removed serial numbers/stickers.
• Damage from accidents, abuse, misuse, neglect, improper voltage connection, unauthorized modifications, or failure to follow instructions.
• Damage from fire, water, lightning, or other acts of nature.
• Repairs attempted by unauthorized personnel.
• Shipping or transport damage.
• Causes unrelated to material or manufacturing defects.
• Consumables like cartons, cases, batteries, tapes, etc.
• be quiet! does not warrant that the product meets specific requirements; suitability is the user's responsibility.
• Removal or installation charges.
• Shipping charges.
• Incidental charges.

IV. Exclusion of Damages

be quiet!'s liability is limited to repair or replacement of defective products. be quiet! is not liable for special, incidental, indirect, or consequential damages, including loss of profits, revenue, or data, interruption of service, loss of business, or tort liability, even if advised of the possibility of such damages.

V. Limitations of Implied Warranties

No other warranties, expressed or implied, including merchantability or fitness for a particular purpose, are provided. The duration of implied warranties is limited to the specified warranty length.

VI. Local Law and Your Warranty

This warranty grants specific legal rights, and users may have additional rights under local law.

VII. No Other Warranty

No be quiet! employee, dealer, or agent is authorized to modify, extend, or add to this warranty.

VIII. To Obtain Technical Support or Warranty Service

Consult the product owner's manual or visit the service section at www.bequiet.com for details and contact information. Proof of purchase is required for warranty service.