Lux Pro LP1100V3 User Manual
High-Output Universal Large Flashlight
Model: LP1100V3
Power Source: 2 D Batteries
Operation Instructions
On/Off: Press and release the button on the side of the light to turn on and off.
Cycle Modes: First turn the light on by pressing down the button on the side of the light completely and releasing. Half-press the button to cycle through modes (High/Low/Strobe). Turning the flashlight on and off, quickly and repeatedly will also cycle the light through the three modes.
Battery Replacement
The LP1100V3 uses 2 D batteries.
To replace the batteries, turn the tail cap counterclockwise to remove it. Tip the light downward to slide out the old batteries. Insert new batteries (+) side facing down. For best results, Lux Pro recommends using brand new alkaline batteries that are the same voltage and brand.
Re-attach the tail cap by pressing down lightly and turning it clockwise until tight.
If you know it will be a while between uses, Lux Pro suggests removing the batteries from the flashlight and storing it in a dry, protected place.
Features
- Constructed with aircraft-grade aluminum
- Long range LPE optics
- Patented TackGrip molded rubber grip
- Ergonomic side button
- IPX4 waterproof rating
- Batteries included (2 D)
Specifications (ANSI/PLATO FL1 STANDARD)
| MODES | LUMENS | RUN TIME | BEAM DISTANCE |
|---|---|---|---|
| High | 455 lm | 5h | 350m |
| Low | 30 lm | 12h | 45m |
| Strobe | 455 lm | -- | -- |
Product Warranty
The LP1100V3 has a Limited Lifetime Warranty Against Manufacturer's Defects from time of purchase.
For warranty claims please contact Lux Pro by calling 801-553-8886 or sending an email to info@simpleproducts.com.
