Ibiza Sound Active Speaker Box with USB/SD & Bluetooth

Safety Precautions

WARNING: This is a CLASS 1 product and must be connected to a main socket outlet with protective earth connection.

• Installation must be carried out by qualified persons following approved safety standards.
• Do not clean the plastic enclosure with solvents or petrochemical-based cleaners.
• Do not place heat-generating objects (e.g., lighting equipment, smoke machines) on the speaker cabinet.
• Protect the speaker cabinet from direct rain or water, as liquid ingress can cause short circuits and hazards.
• Do not stack the speaker cabinet in a manner that could cause injury if it becomes dislodged.
• Use the appliance only in moderate climates, not tropical environments.
• If the main power plug is used as a disconnect device, it must remain easily accessible.

Additional Precautions for Amplified Devices

• Before installation, ensure the power outlet's voltage and frequency match the loudspeaker's requirements.
• Disconnect from the mains before making any connections.
• Ensure the power cord is never crimped or damaged by sharp edges. Keep it away from other cables. Handle the power cord only by the plug.
• Replace the fuse only with one of the same specifications as the original.

Warning: Read the instruction manual carefully before connecting or operating your new speaker.

Functions

MODE Button

Press the MODE button to switch between USB/SD input and Bluetooth input. ?

USB/SD/BLUETOOTH Player Controls

• Play/Pause: ▶️||
• Repeat: ?
• Last Track: ⏪
• Next Track: ⏩

Rear Panel Connections & Controls

The rear panel features various inputs, outputs, and controls. Key elements include:

• 1. USB Player port
• 2. Volume 1: Controls the volume of the Microphone input.
• 3. 1/4" Jack for Mic input
• 4. XLR Connector for Mic input
• 5. Volume 2: Controls the volume of the Line input.
• 6. Balanced RCA connector for devices like CD players, tuners, or mixers.
• 7. XLR Line In for devices like CD players, tuners, or mixers.
• 8. 3.5mm Jack connector for devices like Mobile phones.
• 9. XLR Line Out to connect to another active speaker.
• 10. EQ High Frequencies: Controls the tone level of high frequencies (-12dB to +12dB).
• 11. EQ Low Frequencies: Controls the tone level of low frequencies (-12dB to +12dB).
• 12. Clip LED: Lights up when the input signal reaches distortion level. Reduce input level to avoid distortion.
• 13. Volume 3: Controls the volume of the MP3 player.
• 14. Power Switch: Turns the unit ON/OFF.
• 15. Mains Socket: Connect the IEC mains power cable here.

Bluetooth Pairing

• Press the MODE button to switch to Bluetooth input.
• The Bluetooth icon ? will flash if the unit is not paired.
• The device is identified as "Bluetooth".
• The pairing code is "0000".
• The Bluetooth icon ? will remain steadily lit when the unit is paired.

Functions of the Remote Control

The remote control allows operation from a distance. Key functions include:

• 1. Stop MP3 Player
• 2. Switch between USB / SD / Bluetooth
• 3. Mute MP3 Player sound
• 4. Skip to previous track ⏪
• 5. Skip to next track ⏩
• 6. Play/Pause MP3 Player ▶️||
• 7. Decrease volume ➖
• 8. Increase volume ➕
• 9. EQ: Control tone level.
• 10. Choose music by number.

Technical Specifications

Environmental Information

Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your dealer about the way to proceed.