Gardco SlenderForm SFC & SFCR LED Luminaires

Ordering Guide

Example: SFC-DD-5W-48L-700-NW-G2-UNV-MGY

LED Color - Generation

Specifications

General Description

Gardco SlenderForm luminaires are surface, indirect pendant, or recessed mounted ceiling/canopy luminaires featuring LEDs mounted in a fixed array. Internal components are totally enclosed in a rain-tight, dust-tight, and corrosion-resistant housing. Luminaires are suitable for wet locations.

Housing

Rugged extruded aluminum housing body with an integral LED thermal management system, with die cast aluminum end caps.

SFC Surface/Indirect Pendant Mounted Luminaires - Quick mount plate and mounting

A die formed 14 ga. galvanized steel EZ-hang plate is supplied for mounting to a recessed or surface-mounted 4" (10.16 cm) junction box (by others), flush ceiling mount to a recessed junction box, or direct mount to a surface-mounted junction box. For indirect pendant mounting, order SlenderForm Canopy (SFC) and mount to a wet location junction box (by others) which you then direct mount onto rigid pendant (by others).

Caution: Gardco is not responsible for failure of mounting components supplied by others. Proper care should be exercised in mounting component selection to ensure adequate luminaire support, given luminaire weight, vibration potential and thermal conditions present in the application. If luminaires are supported solely by screws into a composite j-box, additional support directly to structure is recommended.

SFCR Recessed Mounted Luminaires

SFCR luminaires are provided with a recessed mounting kit for installation in a drywall ceiling which includes a wood support structure. SFCR luminaires are not suitable for installation in a grid ceiling. Mounting kit includes a flush trim assembly. Installation can be performed from above or below the ceiling. The mounting kit has adjustable supports that mount to wooden support beams, capable of adjustment from a minimum 20" to a maximum 23.4" spacing.

SFCR luminaires are rated non-IC and require a minimum 3" clearance from insulation in all directions. The bottom of the luminaire will be approx. 1" below the ceiling after installation.

SFCR recessed mount luminaires are NOT available with 900mA, MR, PCB, BX or JB.

LED Module

48 high power LEDs. Metal core printed circuit board. LEDs tested by ISO 17025-2005 accredited lab in accordance with IESNA LM-80 guidelines extrapolations in accordance with IESNA TM-21. IP66 sealed light engines designed and tested to rating IK10 in accordance with European standard EN 62262 (equivalent of international standard IEC 62262 2002). RoHS compliant. Color temperatures per ANSI/NEMA bin Warm White 3000K nominal (3045 +/- 175K), Neutral White 4000 Kelvin nominal (3985 +/- 250K), or Cool White 5000K nominal (5029 +/- 283K).

Electrical

Constant current electronic driver. High power factor (0.9 minimum). 50/60 Hz. Low THD (20% maximum). Open/short circuit protection and voltage overload protection, automatic recovery after correction. Driver comes standard with 6KV on-board surge protection. Dimming driver standard. 0-10V dimming to minimum 10% power. RoHS compliant. Surge protector standard and tested in accordance with ANSI/IEEE C62.45 per ANSI/IEEE C62.41.2 Scenario I Category C High Exposure 10KV/10KA waveforms for Line-Ground, Line-Neutral and Neutral-Ground. Surge protection device wired in parallel so that if it fails open the luminaire will remain lit/powered on.

Due to the inrush current that occurs with electronic drivers, recommend using a time delay or slow blow fuse to avoid unnecessary and unwanted fuse blowing that can occur with fast acting fuses.

Optical Systems

The Type 3 optic is an LED array providing an IES Type III distribution. The Type 5 optic is an LED array providing an IES Type V, wide distribution. The Type 5R optic is an LED array providing an IES Type V distribution, in a rectangular pattern. The concentrated downlight (CD) optic is an LED array that provides a circular pattern of concentrated light directly below the luminaire.

Finish

Each luminaire receives a fade and abrasion resistant, electrostatically applied, thermally cured, triglycidal isocyanurate (TGIC) textured polyester powdercoat finish. Standard color is Medium Gray paint. Optional color (OC) and Special color (SC) options are available, contact factory.

LED Thermal Management

The housing design provides integral extruded aluminum thermal radiation fins to provide the excellent thermal management so critical to long LED system life.

IP Rating

SlenderForm luminaires are IP65 rated with dedicated IP66 rated LED modules. Optional GL Glass Lens assembly available when tempered glass lens is required.

Control Options

DD: 0-10V dimming driver with dimming wires externally accessible for connecting dimming controls by others.

MR: Motion Response luminaires include a WattStopper passive infrared (PIR) motion sensor. Motion sensor standby power is 0.5 watts. In Motion Response luminaires, when no motion is detected for 10 minutes, the Motion Response system reduces the wattage by 80%, to 20% of the normal constant wattage per RP-8, reducing the light level accordingly. When motion is detected by the PIR, the luminaire returns to full wattage and full light output. Motion Response includes light sensor feature called Photocell On/Off which is disabled by default. This feature can be enabled in the field using the hand-held Wireless Remote Programming Tool FSIR-100 (ordered separately) - this allows for daylight harvesting (California Title 24 compliant). Motion sensor also includes reading/measuring feature called Light Level that can be used to establish a baseline for daylight harvesting. See FSIR-100 User Guide for details.

Certifications and Compliance

cULus Listed for Canada and U.S. to the UL 1598 and UL8750 standards, suitable for Wet Locations. Suitable for use in ambients from -40°C (-40°F) to +40°C (+104°F). The quality systems of the facility where manufactured have been registered by UL to the ISO 9001 series standards. Controls options enable compliance with Outdoor lighting energy codes including ASHRAE 90.1, California Title 24, and IECC.

Limited Warranty

5-year limited warranty. See signify.com/warranties for complete details and exclusions.

Hardware and Seals

All exposed screws shall be stainless steel and/or corrosion resistant and captive. All seals and sealing devices are made and/or lined with silicone and/or rubber.

LED Products Manufacturing Standard

The electronic components sensitive to electrostatic discharge (ESD) such as LEDs are assembled in compliance with EC61340-5-1 and ANSI/ESD S20.20 standards so as to eliminate ESD events that could decrease the useful life of the product.

LED Luminaire Useful Life

Refer to IES files for energy consumption and delivered lumens for each option. Based on ISTMT in situ thermal testing in accordance with UL1598 and UL8750, exclusive Signify System Reliability Tool, Advance driver data and LED manufacturer LM-80/TM-21 data, expected to reach 100,000+ hours with L70 lumen maintenance @ 25°C. Luminaire Useful Life accounts for LED lumen maintenance AND all of these additional factors including: LED life, driver life, PCB substrate, solder joints, on/off cycles, burning hours and corrosion.

Predicted Lumen Depreciation Data

Predicted performance derived from LED manufacturer's data and engineering design estimates, based on IESNA LM-80 methodology. Actual experience may vary due to field application conditions based on IESNA LM-80 methodology. Actual experience may vary due to field application conditions. L70 is the predicted time when LED performance depreciates to 70% of initial lumen output. Calculated per IESNA TM21-11. Published L70 hours limited to 6 times actual LED test hours.

Dimensions

SFC Surface/indirect pendant mount top view
21.44cm (8.44")

SFC Surface/indirect mount side view
9.37"/23.8cm (8.44"/21.44cm)

SFCR Recessed mount bottom view
15.1"/38.3cm (3.5"/8.9cm)

SFC Surface/indirect pendant mount luminaires with motion response (NOTE: Motion response NOT available with recessed mount).

SFC Surface/indirect mount end view
6.75"/17.145cm (6"/15.24cm)

Approximate Luminaire Weight

SFCR Recessed mount side view
(height inside ceiling/canopy approx. 6" or 15.24 cm)
20.00" min. to 23.40" max. (50.80 cm min. to 59.44 cm max.)

15.08"
38.30 cm

19.50"
49.53 cm

LED Wattage and Lumen Values Standard SFC & SFCR luminaires

LED wattage and lumen values: DL Diffuse Lens

Values from photometric tests performed in accordance with IESNA LM-79 and are representative of the configurations shown. Actual performance may vary due to installation and environmental variables, LED and driver tolerances, and field measurement considerations. It is highly recommended to confirm performance with a photometric layout.

NOTE: Some data may be scaled based on tests of similar (but not identical) luminaires. Contact factory for configurations not shown.