Renogy Smart Relay (Zigbee)

Introduction

Thanks to its built-in Zigbee 3.0 communication module, the Smart Relay works with Renogy ONE to create a Zigbee LAN. This allows for intelligent control of other connected devices and enables scene synchronization.

This User Manual contains instructions for the Smart Relay. Please read it carefully before using the device.

CAUTION

• Please avoid exposing the components to direct sunlight.
• Do NOT allow water to enter the Smart Relay.
• To ensure quality wireless communication, please keep it away from metal objects at a distance of at least 20 cm (7.88 inches).
• After wiring, use PE double-sided adhesive to secure the Smart Relay to the selected mounting location.

WARNING

• Do NOT disassemble the Smart Relay as no parts inside require maintenance or repair.
• The Smart Relay can only be powered by a DC power supply (8V-30V); otherwise, it will be damaged. Risk of electric shock! Make sure the power supply is powered off before connection.
• When wiring, ensure the wire retainer in the hole is fully opened.

Product Overview

Wiring Holes and Functions

Device Components

The Smart Relay features an LED light and a Button.

• LED light: Displays the current operating status of the Smart Relay.
  • Flashing: Restoring to factory settings and waiting for network distribution (flashes for 3 minutes).
  • On: Relay status is ON.
  • Off: Relay status is OFF.
• Button: Press to power on/off the Smart Relay. Long press for 5 seconds for a factory reset.

Wiring Diagram

AC Load

Description of Diagram: The diagram shows the Smart Relay connected to an AC load. The wiring includes connections for AC Power Supply (L and N), the Smart Relay's IN and OUT terminals, and a rocker switch or push button switch connected to S1 or K1 respectively. The diagram also indicates positive and negative terminals for the DC power supply, though it's shown separately from the AC load connection.

Connections:

• AC Power Supply (L) connects to the Smart Relay's IN terminal.
• AC load connects to the Smart Relay's OUT terminal.
• A rocker switch can be connected to S1, or a push button switch to K1.
• The DC Power Supply's positive terminal connects to V+, and the negative terminal to V-.

WARNING

• Connect the AC Power Supply to OUT/IN only; otherwise, the Smart Relay may be damaged.
• The input voltage of the AC Power Supply shall not exceed 250 V.
• For an AC load, the operating voltage should be ≤ 250 V, and the operating current should be ≤ 16 A.
• You can choose to connect your switch(es) to either, neither, or both of S1 and K1 to your circuit as needed.

DC Load

Description of Diagram: This diagram illustrates the Smart Relay connected to a DC load. Similar to the AC load diagram, it shows the Smart Relay's terminals (OUT, IN, S1, K1, V-, V+) and connections for a DC Power Supply. A rocker switch or push button switch can be connected to S1 or K1.

Connections:

• The DC Power Supply's positive terminal connects to V+.
• The DC Power Supply's negative terminal connects to V-.
• The DC load connects to the Smart Relay's OUT terminal.
• The IN terminal can be used for an AC power supply's fire wire or a DC power supply's positive terminal.
• A rocker switch can be connected to S1, or a push button switch to K1.

WARNING

• The input voltage of the DC Power Supply shall not exceed 30 V.
• For a DC load, the operating voltage should be ≤ 30 V, and the operating current should be ≤ 16 A.
• You can choose to connect your switch(es) to either, neither, or both of S1 and K1 to your circuit as needed.

Adding Smart Relay (Zigbee) to Renogy ONE

The Smart Relay should be used in association with Renogy ONE. For more detailed instructions, please refer to the User Manual of Renogy ONE.

Factory Reset

There are three methods to perform a factory reset:

1. Long press the Button for 5 seconds until the LED indicator flashes.
2. Long press the push button switch connected to K1 until the LED indicator flashes.
3. Turn the rocker switch connected to S1 on and off 10 times continuously.

Technical Specifications

Maintenance

For optimum performance, it is recommended to perform these tasks regularly:

• Ensure the Smart Relay is mounted in a clean, dry, and ventilated area.
• Ensure there is no damage or wear on the cables.
• Make sure the Smart Relay is in a normal state.
• Ensure there are no signs of corrosion, insulation damage, or discoloration marks from overheating or burning.

Technical Support

For additional support, contact the Renogy technical support team through renogy.com/contact-us. Please have the following information available when contacting Renogy:

• Owner name
• Contact information
• Order number
• Purchase channel
• Serial number
• Brief description of the issue

Disclaimer

• Renogy makes no warranty as to the accuracy, sufficiency, or suitability of the information in this User Manual, as continuous product improvements are ongoing.
• Renogy assumes no responsibility or liability for losses or damages, whether direct, indirect, consequential, or incidental, that may arise from the use of the information in this User Manual.
• Renogy is not responsible or liable for failures, damages, or injuries resulting from repairs attempted by unqualified personnel or improper installation and operation.
• The illustrations in this User Manual are for demonstration purposes only. Details may appear slightly different depending on product revision and market region.
• Renogy reserves the right to change the information in this User Manual without notice.

Renogy Empowered

Renogy aims to empower people worldwide through education and the distribution of DIY-friendly renewable energy solutions. Renogy strives to be a driving force for sustainable living and energy independence. Through its range of solar products, Renogy enables users to minimize their carbon footprint by reducing the need for grid power.

Live Sustainably with Renogy

Did you know? In a given month, a 1KW solar energy system can:

• Save 170 pounds of coal from being burned
• Save 300 pounds of CO2 from being released into the atmosphere
• Save 105 gallons of water from being consumed

Renogy Power PLUS

Renogy Power Plus allows users to stay informed about upcoming solar energy innovations, share their experiences in their solar energy journey, and connect with like-minded individuals who are contributing to global change within the Renogy Power Plus community. Follow Renogy on Social Media @RenogySolar.