S.H.Figuarts Porunga & Dende Luminous Dragon Ball Set

Product Description

This set features the powerful Porunga and the loyal Dende from Dragon Ball Z, brought to life in the S.H.Figuarts line. The set includes luminous Dragon Balls that activate with Dende's voice and Porunga's appearance, recreating iconic moments from the series.

Set Contents

• Instruction Manual (this document)
• Porunga Figure (1)
• Interchangeable Hand Parts for Porunga (3)
• Fin (Upper/Lower) (1 each)
• Base for Porunga (1)
• Dende Figure (1)
• Interchangeable Head Parts for Dende (1)
• Interchangeable Hand Parts for Dende (2)
• Star Planet Namek Ver. Dragon Balls (1-7 Star) (7)
• Base for Dragon Balls (1)

Assembly and Setup

Porunga Assembly

Refer to the diagrams for assembly. The upper and lower fins attach to the body. The upper fin slots into the lower fin via its slit.

Dende Assembly

Dende comes with interchangeable head and hand parts for customization.

Dragon Ball Base Setup

Battery Installation

To install batteries:

• Use a thin stick to press the release button and slide the battery cover off.
• Insert 3 AA/R6 batteries (sold separately), observing correct polarity.
• Replace the battery cover.

The base requires 3 AA/R6 batteries (alkaline recommended).

The power switch controls the unit's operation.

Operation Guide

Dragon Ball Base Interaction

To activate the Dragon Balls and summon Porunga:

1. Place the Dragon Balls on the base, ensuring the star symbol faces upwards. The ball will flash once when placed correctly.
2. After placing all 7 Dragon Balls, they will flash simultaneously.
3. Place Dende on the designated spot. Dende's spell will play, and the Dragon Balls will begin to flash.
4. Pressing the function button (or after a set time) will trigger Porunga's summoning sound and dialogue.
5. Porunga will ask for wishes up to three times. Press the function button after considering your wish to hear Porunga's reply.
6. Alternatively, lifting Dende at least 10cm from the base and placing it back will trigger the same response as pressing the function button.
7. Porunga's replies may vary, and some wishes may be denied.
8. If the function button is not pressed, Porunga or Dende may prompt for a wish.
9. After the third wish, Porunga's disappearance sound will play, ending the sequence.
10. The sequence also ends if no button is pressed within a certain time.
11. If the power switch remains ON, pressing the function button will restart the sequence from the beginning.

Note: The function button can be pressed to initiate the summoning sequence even without placing Dende on the base.

Note: Porunga's replies do not guarantee future outcomes.

Safety Precautions

• Age Recommendation: For ages 15 and up.
• Small Parts Warning: Contains small parts. Not suitable for children under 15 years old.
• Sharp Edges: May contain parts with sharp points and edges. Handle with care to avoid injury.
• Color Migration: Do not place on plastic furniture, sofas, sheets, tiles, or resin surfaces, as it may cause color transfer.
• Handling: Use caution when assembling and operating. Avoid excessive force when bending, pulling, or attaching movable parts.
• Battery Safety: Remove batteries if the product is not used for a long time to prevent leakage.
• Environment: Avoid use in environments with strong radio waves or near metal objects, as this may cause malfunction.
• Disassembly: Do not disassemble, modify, or expose to extreme temperatures.
• Pacemakers: Individuals using pacemakers should exercise caution due to potential magnetic interference.

Legal and Compliance Information

FCC/IC Compliance

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Shielded cables must be used with this unit to ensure compliance with the Class B FCC limits. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAN ICES-3 (B)/NMB-3(B).

RFID Information (Japan)

This product contains an RFID (Radio-Frequency Identification) device (Ministry of Internal Affairs and Communications designated No. AC-22022). While it utilizes RFID technology, it has obtained type approval under Japan's Radio Law, eliminating the need for installation permits for high-frequency utilization equipment. Modifying or dismantling the unit to radiate unauthorized radio waves is a violation of the Radio Law and is punishable.

General Disclaimer

Product may differ slightly from illustrations. Colors, styles, and decorations may vary.

Support and Resources

• For display support, use the separately sold Tamashii Stage: https://tamashii.jp/special/t_stage/
• Product Questionnaire: https://tamashii.jp/survey/
• Web Instruction Manual: https://tamashii.jp/torisetsu/ (Search for this item)