Vehicle Identification Numbers
Vehicle Identification Number (VIN)
The VIN is stamped on a plate visible through the lower part of the driver's side of the windscreen. It should match the VIN recorded in the service book. VIN information can also be found in the following locations: bonnet latch panel, suspension strut, and the side panels of an open door.
The image displays a VIN plate with the following labeled information:
- 1. Certificates (if required)
- 2. Vehicle Identification Number (VIN)
- 3. Gross vehicle weight (if applicable)
- 4. Gross train weight (if applicable)
- 5. Maximum front axle load (if applicable)
- 6. Maximum rear axle load (if applicable)
The VIN plate also shows the manufacturer as LANDROVER and includes a model designation such as SALLMAMC31A002112, along with weight specifications in kilograms (kg).
Date of Manufacture (Australia Only)
This plate indicates the month and year the vehicle was produced, which is the vehicle's assembly date (body and powertrain). The vehicle's manufacturing date is printed on the plate in the engine compartment.
When contacting a dealer or Land Rover technical center, you may be asked for the vehicle's identification number (VIN).