GROHE Tempesta New Shower Set Installation

Product Details

This guide provides assembly and installation instructions for the GROHE Tempesta New shower set, model 27598001. It is designed for clear, step-by-step guidance.

Component Identification

The diagrams show various configurations of the shower rail system, with specific part numbers and dimensions:

• Key Part: 48 051 (frequently used)
• Other Parts: 48 092, 48 095, 48 098, 48 093, 12 140, 48 099
• Rail Lengths:
  • 620 mm (24 7/16")
  • 920 mm (36 1/4")
  • 1020 mm (40 3/16")
• Measurement: 8 mm (5/16")

An asterisk (*) indicates important components or reference points.

Assembly Steps

Follow these steps to assemble and install the shower set:

1. Step 1: Initial Component Connection

   Connect the first component to the main vertical assembly. The diagram shows a part being inserted into another.

2. Step 2: Attaching Subsequent Parts

   Connect the next part to the assembly. This involves sliding a component into place on the main structure.

3. Step 3: Wall Mounting

   This section covers attaching the shower rail system to the wall.

   • Step 3a: Install Wall Bracket

     Secure the wall bracket to the wall using screws. This bracket serves as the mounting point.

   • Step 3b: Connect Rail to Bracket

     Attach the shower rail assembly to the wall bracket. Part 48 051 is shown facilitating this connection.

4. Step 4: Final Assembly

   Complete the installation by making final adjustments or connections as depicted.

Shelf/Tray Installation

Additional steps detail the attachment of a shelf or tray to the shower rail:

1. Step 1: Prepare Shelf

   The shelf is shown with its designated mounting points.

2. Step 2: Mount Rail Component

   A mounting component (e.g., clip or bracket) is attached to the shower rail.

3. Step 3: Attach Shelf to Rail

   The shelf is secured to the rail by connecting it to the component installed in the previous step.