GROHE Euphoria 260 Shower System

Important Installation Note

Wall Mounting: When installing, for example, on plasterboard walls (which are not solid walls), it must be assured that an appropriate reinforcement is in place within the wall to ensure sufficient strength.

Minimum Installation Height: The system requires a minimum installation height of 175 cm.

Assembly and Components Overview

The provided diagrams illustrate the assembly and components of the GROHE Euphoria 260 shower system. They detail the connection points and the sequence for installation.

Key Components Depicted:

• Shower Head: Available in large diameter (Ø260 mm) and smaller diameter (Ø160 mm) options.
• Shower Arm: Connects the overhead shower head to the shower rail.
• Shower Rail: The main vertical support, typically adjustable in height.
• Diverter/Control Unit: Manages water flow between different shower outlets (e.g., overhead shower, hand shower).
• Handle: Operates the diverter mechanism.
• Mounting Hardware: Includes screws, wall plugs, decorative rosettes, and support brackets essential for secure wall attachment.
• Hoses: Connections for water supply and the hand shower.

General Assembly Steps: The diagrams show steps such as attaching the shower arm to the rail, connecting the shower head, mounting the rail to the wall using the provided hardware, and assembling the control unit with the handle. Specific part numbers (e.g., 48 279, 45 933, 48 007, 06 768, 08 565, 27 180) are referenced, indicating distinct components. Dimensions such as minimum installation height (min.175) and connection sizes (e.g., 24mm) are also indicated.