PCE Instruments PCE-RCM 16 Multi-function Air Quality Monitor

Settings

Double-press the power button to enter the system settings interface. You can set the value by pressing UP and DOWN buttons, and the device can save settings automatically. To move to the next setting, press the Power button. You can configure Date, Time, Alarm Clock, and Screen saver.

System Setup Example:

• Date: 2017/09/09
• Time: 10:26:20
• Alarm Clock: 07:20 on/off
• Screensaver: never

Screen Saver Settings:

There are four options for the screen saver: never, 10 minutes, 30 minutes, 60 minutes.

Air Quality Grade Ranges

CO2 Air Quality Grade Range

PM2.5 Air Quality Grade Range

AQI Air Quality Grade Range

TVOC Air Quality Grade Range

Chapter Six Precautions

1. This instrument is a precision instrument. Avoid contact with alcohols, perfumes, and other volatile organic compounds or gases, as they may affect testing accuracy.
2. For accurate readings, keep the living room, bedroom, and other indoor rooms closed for 12 hours before detecting the air. This allows the instrument to be more responsive to real pollution levels. Select the average value from different detection points for more accurate data.
3. The instrument uses a sampling mode through the free circulation and diffusion of air. Air quality readings may fluctuate over time, which is normal.
4. Do not blow or block the sensor detection port of the instrument, as this will interfere with its normal operation.
5. The instrument is a precision instrument; do not disassemble the housing or internal devices yourself.

Chapter Seven Product Specifications

Product Name: High precision multi-function air quality monitor

Dimensions: 131*78*67.5 CM

Working temperature: -10 - 50 °C

Input specification: 5V/2A

Charging interface: Micro USB

Display mode: TFT Screen

Working humidity: 20%

Battery capacity: 3000mAh

TVOC Technical Indicators

• Measuring range: 0.000-9.999mg/m3
• Measurement accuracy: ±10%
• Resolution: 0.001mg/m3
• Measuring principle: semiconductor

PM2.5, PM1.0, PM10 Technical Indicators

• Measuring range: 0-999mg/m3
• Measurement accuracy: ±10%
• Resolution: 1ug/m3
• Measuring principle: laser light scattering

Temperature and Humidity Technical Indicators

• Measuring range: 0-50 ° C
• Humidity range: 20%-90% RH
• Measurement accuracy: ±1 °C
• Measurement accuracy: ±4% RH

CO2 Technical Indicators

• Measuring range: 0-5000PPM/m3
• Measurement accuracy: ±10%
• Resolution: 1PPM/m3
• Measuring principle: ±5% RH

Chapter Eight Packing List

• Main device * 1
• Charging cable *1
• Package Box * 1
• User manual *1

User Manual

Please read the user manual carefully before using this product and keep it in a safe place.

Chapter One Product Introduction

This detector monitors CO2, PM2.5, PM10, PM1.0, TVOC, and temperature/humidity. Using advanced air quality analysis technology with four high-precision independent sensors and computing chips, it measures data instantaneously and accurately, converting it into intuitive information that reflects air pollutant content. This allows for easy control of air quality. The instrument is suitable for household, vehicle, and public place use.

Chapter Two Function Description

1. 4.3 inch large screen TFT LCD display
2. Support dust detection of PM2.5, P1.0, PM10
3. Support CO2 detection
4. Support TVOC mixed gas detection
5. Time calendar function
6. Alarm clock function
7. Support a variety of interface choices, user-friendly design
8. Built-in large capacity lithium battery, including USB charging cable.
9. Support temperature and humidity test
10. Display air quality index (AQI) Data.

Chapter Three Usage

1. Initial use: The instrument is factory-calibrated by professional equipment. The first time you use the instrument, the data on the screen may be higher initially, which is normal. Please take the instrument for outdoor ventilation for 30 minutes, then it will work normally.
2. Operating Instructions:
   1. Switching machine: Long-press the Power button for more than 3 seconds to boot. Press and hold the power button to turn off the power automatically.
   2. Charging: Insert the charging cable into the USB port of the charger and the Micro USB port at the back of the instrument. The charging symbol will appear at the upper right corner. Full charging time needs about 2-3 hours.

Chapter Four Product Schematic Diagram

The diagram shows the front of the air quality monitor with various readings displayed on the screen. Key indicators labeled include AQI, PM2.5, CO2, TVOC, PM10, PM1.0, Temperature, Humidity, Alarm Clock, and Power. Specific readings shown are AQI: 2, PM2.5: 49 µg/m³, CO2: 428 PPM, TVOC: 0.256 mg/m³, PM10: 34 µg/m³, PM1.0: 20 µg/m³, HUM: 56%, TEMP: 23°C. The date and time are displayed as 22 Aug 10:18.

Interface Labels: AQI, PM2.5, Alarm Clock, Power, TVOC, CO2, Humidity, Temperature, PM1.0, PM10

Chapter Five Mode of Operation

Interface 1

This is the main interface. The different background colors reflect different test values.

Interface 2

This interface displays test values of AQI, PM2.5, PM1.0, PM10, CO2, TVOC, etc.

Interface 3

The first time is recorded after boot 30 seconds, the interval time is 20 minutes. It accumulates the test results of the latest 8 hours.