Absolute Moisture Meter
BL Compact B
Building Moisture Indicator (% weight / % CM)
This device is designed for measuring moisture content in various materials.
- 7 characteristic curves for materials
- 2 characteristic curves for insulation materials
- MIN, MAX and HOLD functions
- Acoustic alarm
- Automatic calibration
- Automatic Power Off
Image of the BL Compact B moisture meter, showing its digital display with readings and buttons.
Technical Specifications
| Parameter | Value |
|---|---|
| Digits | Measurement range / resolution |
| Building hum. | 0 ... 100 / 1 |
| Wood moisture | 0.4 ... 6.0 % weight / 0.1 % |
| Display | Tendency indication / 3 levels |
| Response time | 3 lines |
| Power supply | <2 seconds |
| Operating cond. | 9 V battery |
| Applicable types | 0 ... +50 °C -10 ... +60 °C (short time) |
| Dimensions | 6LR61 type and / or 6F22 type 190 x 50 x 30 mm |
| Weight | approx. 180 g |
Includes
- Building moisture indicator
- Battery
- Plastic box
- Instruction manual
Item No.: K-BL Compact B
PCE-WP21
Moisture Meter for Concrete and Screed
This meter is suitable for measuring moisture in concrete and screed.
- Selectable types of concrete (light / heavy)
- No need to prepare sample
- 3-digit LC display
- Can be used on-site easily
- Battery level indication
Image of the PCE-WP21 moisture meter for concrete, showing its LCD display and buttons.
Technical Specifications
| Parameter | Value |
|---|---|
| Meas. range | 1 ... 8 % absolute humidity |
| Resolution | 0.1 % |
| Accuracy | ±0.7 % |
| Meas. type | Non-destructive |
| Meas. method | High-frequency measurement method |
| Meas. depth | Approx. 50 mm |
| Power supply | 9 V battery |
| Functions | Battery level indication |
| Display | Light / heavy concrete LCD, 3 1/2 digits |
| Dimensions | 165 x 80 x 30 mm |
| Weight | 500 g |
Includes
- Moisture meter
- Battery
- Carrying case
- Instruction manual
Item No.: K-PCE-WP21
PCE-WP24
Moisture Meter for Building Materials
This device measures moisture in various building materials.
- Measuring depth: 50 ... 60 mm (depends on material)
- Measurement results within seconds
- No need to prepare sample
- Large LCD display
- Suitable for on-site use
- Battery level indication
Image of the PCE-WP24 moisture meter for building materials, showing its LCD display and probe.
Technical Specifications
| Parameter | Value |
|---|---|
| Measurement range (wood) | 4 ... 60 % absolute moisture |
| Measurement range (building mat.) | 0 ... 10 % abs. m. |
| Resolution / accuracy | 0.1% / ±0.7% |
| Meas. depth (wood) | Approx. 50 mm |
| Meas. depth (building material) | Approx. 60 mm |
| Settings (density) | 0.3 ... 1.1 g/cm³ |
| Settings (dens. building mat.) | 0.8 ... 2.8 g/m³ |
| Settings (wood thickness) | 10 ... 60 mm |
| Settings (build. mat. thickness) | 30 ... 50 mm |
| Power supply | 9 V battery |
| Display | LCD, 3 1/2 digits |
| Dimensions / weight | 165 x 80 x 30 mm / 500 g |
Includes
- Moisture meter
- Battery
- Carrying case
- Instruction manual
Item No.: K-PCE-WP24
PCE-WM1
Rel. Hum. / Abs. Moisture Meter [g/m³]
This device measures relative humidity and absolute moisture.
- Measures relative humidity and temperature
- Calculates absolute moisture in g/m³ and dew point
- HOLD function
- External probe for temperature and humidity
- Automatic Power Off / MIN, MAX, HOLD
Image of the PCE-WM1 humidity and moisture meter with an external probe.
Technical Specifications
| Parameter | Value |
|---|---|
| Meas. range | 10 ... 95 % RH / -20.. +80 °C |
| Resolution | 0.1% RH / 0.1 °C |
| Accuracy | ±2% RH / ±0.5 °C |
| Dew point | -25.3... +48.9 °C |
| Absolute moisture | Calculated |
| Functions | MIN, MAX, HOLD |
| Recalibration | By PCE Instruments |
| Display | LCD, 3 1/2 digits |
| Power supply | 9 V battery |
| Dimensions (probe) | 150 x 30 mm |
| Dimensions (device) | 165 x 80 x 33 mm |
| Weight | 380 g |
Includes
- Humidity / moisture meter with external sensor
- Temperature sensor
- Battery
- Case
- Instruction manual
Item No.: K-PCE-WM1
RH-2
Thermohygrometer for climatological and environmental use
This thermohygrometer is designed for environmental monitoring.
- Quick adaptation / stable and long-life sensors (optional sensors)
- Simple saving of the measured values for later reference
- Multi-lingual menu
- Innovative sensor technology
- HOLD function
Image of the RH-2 thermohygrometer with its display and connected sensors.
Technical Specifications
| Parameter | Value |
|---|---|
| Measurement range (Temp. / RH) | -20 °C ... +120 °C / 0 ... 100 % RH (precision penetration probe) -20 °C ... +85 °C / 0 ... 100 % RH (temp. / RH probe, 2 m cable) |
| DP | +55 ... +60 °C |
| RH | 0 ... 130 g/m³ (air) / EMC 2 ... 30 % (wood) |
| Resolution | 0.1 °C / 0.1 % / 0.1 g/m³ / 0.1 % (EMC) |
| Accuracy (EMC wood humidity) | ±0.5 % |
| Accuracy (hum./ temp sensor) | ±0.5 °C / ±1.5 % |
| Accuracy (RH/temp. probe with 2 m cable) | ±0.5 °C / RH ±2.5 % |
| Sample quantity / ATC | 300 g / included |
| Memory / display | 10000 values / 128 x 64 mm matrix display with backlight |
| Power supply | 4 x 1.5 V AA Alkaline batteries (for approx. 1800 measurements) |
| Dimensions (F1/F2) | 145 x 63 x 24 mm / F1: 100 x 12 mm / F2: 300 x 12 mm |
| Weight | 400 g |
Includes
- Thermohygrometer
- Box
- Batteries
- Instruction manual (sensor and AW meas. chamber can be ordered separately)
Item No.: K-RH-2
Optional Accessories
- K-RH-2-AW: AW chamber + F2
- K-RH-2-TP: F1 (temp. / RH probe, 2 m cable)
- K-RH-2-PFT: F2 (precision penetr. probe RH / °C)
- K-RH-2-PFTD: RH / temp. comp. air probe, 2m
- K-RH-2-USB: USB LogMemorizer module
- K-RH-2-S: Sintered cap
- K-RH-2-E: Verification / calibration kit (2 x 35%, 1 x 50%, 2 x 80% RH)
DampMaster
Material Moisture Meter
This meter is designed for various wood and building materials.
- For different groups of wood and building materials
- Evaluation of results as wet / dry
- LC display with backlight / bar chart
- Automatic / manual temperature compensation
- Indication mode for reference measurements
Image of the DampMaster material moisture meter, showing its LCD display and controls.
Technical Specifications
| Parameter | Value |
|---|---|
| Meas. range | 0 ... 90 % |
| Resolution | 0.1 % |
| Accuracy (wood) | 0 ... 30%: ±1.0% 30 ... 60%: ±2.0% 60 ... 90%: ±4.0% |
| Accuracy (other materials) | ±0.5 % |
| Display | LCD |
| Pins | Integrated in case (L= 6 mm) |
| Power supply | 3 x CR2032 batteries |
| Operating cond. | 0 ... +40 °C / 0 ... 85 % RH |
| Case | Plastic material |
| Dimensions / weight | 115 x 60 x 30 mm / 169 g |
Includes
- Material moisture meter
- Protective cap
- Battery
- Bag
- Instruction manual
Item No.: K-DampMaster
Optional Accessories
- K-MMK-E-10: Pins 10 mm (pack of 6)
PCE-MMK 1
Relative Humidity and Absolute Moisture Meter
This meter offers self-diagnostic capabilities for various materials.
- Self-diagnostic programme for moisture of wood, paper, cardboard and building materials
- Display backlight switches off automatically after 10 seconds
- Wet / dry indication / manual temperature compensation
- Types of wood and building materials adjustable
- 3 different electrodes included
- Saves maximum and minimum values
Image of the PCE-MMK 1 meter, showing its display and connection ports.
Technical Specifications
| Parameter | Value |
|---|---|
| Meas. range (wood) | 1 ... 75 % |
| Meas. range (build. mat.) | 0.1 ... 2.4 % |
| Meas. range (temperature) | -40 °C ... +70 °C |
| Meas. range (air humidity) | 0 ... 100 % |
| Resolution | 0.1 % |
| Accuracy (wood) | 1 ... 30%: ±1% 31 ... 60%: ±2% 61 ... 75%: ±4% |
| Accuracy (build. mat.) | ±0.5 % |
| Accuracy (temp) | -40 ... -10 °C: ±2 °C -10 ... +40 °C: ±1 °C +40 ... +70 °C: ±2 °C |
| Accuracy (air hum.) | 0 ... 20%: ±5% 20 ... 80%: ±3.5% 80... 100%: ±5% |
| Electrode length | 8 mm (internal), 30 mm and 150 mm (external) |
| Meas. method | Electrical resistance |
| Auto Power Off | After 3 minutes of inactivity |
| Case | Plastic, shock-proof |
| Power supply | 3 x CR 2032 batteries |
| Operating cond. | 0 ... +40 °C / 0 ... 85 % RH |
| Dimensions | 139 x 47 x 25 mm |
| Weight | 100 g (without electrodes) |
Includes
- Humidity / moisture meter
- Cap for self-diagnostic programme and external electrodes
- Ram-in electrode
- Penetration and paper electrodes
- 2 x 30 mm pins
- 2 x 150 mm measuring tips
- 2 x 300 mm extensions
- Case
- Instruction manual
Item No.: K-PCE-MMK 1
Optional Accessories
- K-MMK-E-10: Pins 10 mm (pack of 6)
Sensors for FMW, FMC, FME and FMD Models
A variety of optional accessories and sensors are available for specific PCE models.
Optional Accessories for FMC, FME, FMD 6 Models
- K-HEHB: Hand-held electrode (to penetrate wood and building materials)
- K-REHB: Ram-in electrode (for more powerful penetration of wood and building materials)
- K-ENS-30: Replacement pins, 30 mm, for hand-held and ram-in electrodes (without insulation, pack of 10)
- K-ENS-60: Replacement pins, 60 mm, for hand-held and ram-in electrodes (without insulation, pack of 10)
- K-TFK: Temperature sensor (only for FME and FMD for temperature compensation)
Images showing various electrodes: hand-held electrode, ram-in electrode, pins 30 mm, pins 60 mm, and temperature sensor.
Universal Sensor Holder
A universal sensor holder is necessary for using the sensors listed below.
- K-UFH: Universal sensor holder (for connecting the sensors below), cable included
- K-BH-OFF: Surface sensor (non-destructive, for all material surfaces)
- K-ESF-325: Penetration sensor 325 mm (for granulates, wood chips, pellets, sand, ...)
- K-NF4-15: 4-pin sensor 1.5 mm (for cork, rubber, textiles, ...)
- K-NF4-17: 4-pin sensor 17 mm (for building materials and wood)
- K-NF2-100: 2-pin sensor 100 mm (for insulation materials, glass wool, fruit, ...)
- K-SNF-175: 2-pin sensor 175+75 mm, the first 175 mm are insulated (for bulk goods such as wood pellets, coffee, ....)
- K-BH-RF: Roller sensor for moving surfaces (such as paper webs, veneer, textiles, ...)
Images showing a universal sensor holder and various sensor types: surface sensor, sensor 325 mm, sensor 100 mm, 4-pin sensor 1.5 or 17 mm, 2-pin sensor (175+75 mm), and roller sensor.
Special Sensors
- K-BH-KF: Stainless steel chamber sensor (for loose materials such as sawdust, cereals, ...), please order the cable separately.
- K-BH-KF-K: Measuring cable for chamber sensor
- K-BFS: Sensor set for concrete and screed
- K-BFS-10: Replacement pins for concrete sensor set (pack of 10)
PCE-SMM 1
Absolute Soil Moisture Meter
This meter determines the moisture content of soil.
- Determines moisture of soil
- MIN, MAX and DATA HOLD functions
- Battery level indicator
- Probe length 225 mm
- Case protection class IP67
Image of the PCE-SMM 1 absolute soil moisture meter, showing the probe and main unit.
Technical Specifications
| Parameter | Value |
|---|---|
| Meas. range | 0 ... 50 % (absolute moisture) |
| Resolution | 0.1 % |
| Accuracy | ±5 % ±5 digits |
| Probe length | 225 mm |
| Protection class | IP67 |
| Display | LCD |
| Functions | MIN, MAX and DATA HOLD |
| Power supply | 4 x 1.5 V AAA batteries (incl. battery level indication) |
| Operating cond. | 0 ... +50 °C / <80 % RH |
| Dimensions | 175 x 40 x 40 mm |
| Weight | 240 g |
Includes
- Moisture meter
- Probe
- Batteries
- Instruction manual
Item No.: K-PCE-SMM 1
TDR-100
Relative and Abs. Soil Moisture Meter
This meter determines soil moisture and calculates water deficit.
- Determines soil moisture in % by volume, saturation in % and calculates the water deficit in mm/m²
- 3 different moisture sensors available (depending on the measurement task and the characteristics of the soil)
- Programmable via PC, software included
Image of the TDR-100 relative and absolute soil moisture meter with its display and connected probe.
Technical Specifications
| Parameter | Value |
|---|---|
| Meas. range | 0 ... 100 % saturation (relative) approx. 0... 50 % vol (absolute) |
| Resolution | 1 % |
| Accuracy | ±3 vol % |
| Types of soil | 2 selectable |
| Sensor length | 75, 120 or 200 mm |
| Protection class | IP 54 |
| Interface | RS-232 |
| Software | Included |
| Display | 2-line LCD |
| Power supply | 4 x 1.5 V AAA batteries |
| Dimensions / weight | 105 x 70 x 18 mm / 700 g |
Includes
- Moisture meter
- Software in English
- RS-232 interface cable
- Instruction manual
Item No.: K-TDR-100
Optional Accessories
- K-TDR-S75: Probes 75 mm (1 pair)
- K-TDR-S120: Probes 120 mm (1 pair)
- K-TDR-S200: Probes 200 mm (1 pair)
- K-RS232-USB: RS-232 / USB adaptor
PCE-WT1N
Moisture Meter for Sawdust
This meter quickly measures moisture in biomass materials.
- Determines moisture quickly
- Works on the basis of electrical resistance
- Measures biomasses such as straw, hay, sawdust,...
- Sample size up to 120 cm³
- Quick and easy to use
- Resilient design, overpressure protection
Image of the PCE-WT1N moisture meter for sawdust, showing its probe and display.
Technical Specifications
| Parameter | Value |
|---|---|
| Meas. range (sawdust / shavings / straw / hay) | 8 ... 30 % |
| Meas. range (other) | 8 ... 25 % |
| Resolution | 0.1 % |
| Accuracy | ±10 % of measured value |
| Meas. volume | 120 cm³ |
| Sample size | max. 20 x 15 x 15 mm |
| Meas. pressure | approx. 0.2 MPa |
| Temp. compensation | Digitally adjustable |
| Display | LCD, 3 digits |
| Power supply | 12 V battery type A 23 |
| Operating cond. | 0 ... 50 °C |
| Dimensions / weight | 300 x 220 x 65 mm / 990 g |
Includes
- Sawdust moisture meter
- Battery
- Case
- Instruction manual
Item No.: K-PCE-WT1N
PCE-WIO 1
Meter for Water Content in Silicone-, Bio-, Ester- and Other Oils
This meter measures water content in various oils.
- Operating pressure up to 30 MPa / temperature compensation
- Protective filter for sintered metals / only 2 buttons make it easy to use
- Calibration with certified testing equipment / switch output
- RS-232 interface / high media compatibility
- Sensor protection class: case IP66 / connector IP67
Image of the PCE-WIO 1 meter for water content in oils, showing the sensor and connection.
Technical Specifications
| Parameter | Value |
|---|---|
| Meas. range (oil) | Water content: 10 ... 20000 ppm Temperature: -20 ... +70 °C |
| Accuracy | Depends on calibrated data, <±10% of reading |
| Operating pressure | Vacuum up to 30 MPa |
| Media compatibility | Must be clarified for aggressive materials |
| Outputs | RS-232 data I/O for computer connection |
| Current output | 4... 20 / switch output 24 V DC, max. 100 mA (optional) |
| Connectors | Round connector, 7 pins, Binder 723 type |
| Sensor connection | 5/8 - 18 UNF, SW 22 |
| Sensor oper. cond. | -20 ... +60 °C |
| Sensor power supply | 18... 28 V DC; approx 30 ..70 mA |
| Sensor dimensions | 115 mm / case Ø 60 mm / total length 176 mm |
| Installation depth | 50 mm; thread 1/2 inches |
| Meas. interval | Preset interval |
| Display | LCD of 2 lines and 16 dgt per line |
| Interface | USB 2.0 |
| Memory | 12000 measured values with time and date |
| Case | Die cast aluminium |
| Protection class | IP66 / connector IP67 |
| Power supply | 4 x NiMh AA rechargeable batteries |
| Operating conditions | -20 ... +40 °C |
| Dimensions | 100 x 200 x 42.4 mm |
Includes
- Water in oil meter
- Moisture sensor
- Carrying strap
- Sensor cable (2 m)
- 4 x NiMh AA rechargeable batteries
- Charger
- USB cable (1.5 m)
- Software
- Instruction manual
Item No.: K-PCE-WIO 1
GMK 210
Moisture Meter for Caravans / Boats
This meter quickly detects moisture sources in caravans and boats.
- Quickly detects the source of moisture
- 14 characteristic curves for wood and glass fibre reinforced plastics used in caravans and boats
- Non-destructive measurement method
- Moisture displayed in % / 2 measurement depths
- Acoustic and visual evaluation of moisture
Image of the GMK 210 moisture meter for caravans and boats, showing its display and controls.
Technical Specifications
| Parameter | Value |
|---|---|
| Measurement depth | 10 mm and 25 mm |
| Display | Characteristic curves, measurement value, visual evaluation of humidity on 6 levels from WET to DRY |
| Acoustic evaluation | Signal tone |
| Characteristic curves | 14 for wood and glass fibre reinforced plastics |
| Functions | BATT, Auto Power Off, HOLD |
| Light current | Approx. 2.5 mA (Auto Power Off) |
| Protection class | IP65 on front side |
| Power supply | 9 V batteries |
| Operating cond. | -25 ... +50 °C |
| Dimensions | Approx. 106 x 67 x 30 mm |
| Weight | 145 g |
Includes
- Moisture meter for caravans and boats
- 9 V battery
- Instruction manual
Item No.: K-GMK-210
Optional Accessories
- K-PW 25: Testing block for control
PCE-MB Series
Moisture Meter / Mini Kiln for Determination of Absolute Moisture in Nearly All Materials
This series includes mini kilns for determining absolute moisture in a wide range of materials.
- Determination of moisture in materials such as pellets, biomass, sewage sludge, waste paper, slurry, powder, granulates, pastes, coating colours, ...
- Integrated viewing window to watch the drying process
- Temperature range of +50 ... +160 °C / resolution starting at 0.001 g
- RS-232 and USB interface / PC software optionally available
Image of a PCE-MB Series moisture meter/mini kiln, showing its weighing platform and display.
Technical Specifications
| Model | Max. measurement range | Resolution | Accuracy | Weighing platform |
|---|---|---|---|---|
| PCE-MB 60C | 60 g | 0.001 g | 0.03 g | Ø90 mm |
| 0 ... 100 % absolute moisture | 0.01 % | 0.04 % | ||
| 100 ... 0 % dry content | 0.01 % | 0.04 % | ||
| PCE-MB 111C | 110 g | 0.01 g | 0.01 g | |
| 0 ... 100 % absolute moisture | 0.1 % | 0.04 % | Ø90 mm | |
| 100 ... 0 % dry content | 0.01 % | 0.04 % | ||
| PCE-MB 120C | 120 g | 0.001 g | 0.03 g | Ø90 mm |
| 0 ... 100 % absolute moisture | 0.01 % | 0.04 % | ||
| 100 ... 0 % dry content | 0.01 % | 0.04 % | ||
| PCE-MB 210C | 210 g | 0.001 g | 0.03 g | Ø90 mm |
| 0 ... 100 % absolute moisture | 0.01 % | 0.04 % | ||
| 100 ... 0 % dry content | 0.01 % | 0.04 % |
| Parameter | Value |
|---|---|
| Taring range | All weighing range |
| Calibration | External calibration possible |
| Heaters | 2 halogen heaters of 60 watts |
| Display dur. drying | Moisture [%] / weight loss, dry matter [%] absolutely dry / residual mass, time and date |
| Memory | 20 (for material-specific drying processes, curves) |
| Display | Large graphical display with menu in different languages |
| Interface | RS-232 and USB |
| Power supply | 230 V / 50 Hz |
| Operating cond. | +18 ... +30 °C |
| Dimensions / weight | 235 x 245 x 260 mm / approx 3.8 kg |
Includes
- Moisture meter PCE-MB (one of the models)
- 10 aluminium sample pans
- Network cable
- Instruction manual
Item No. / Item:
- K-PCE-MB 60C: Moisture meter
- K-PCE-MB 111C: Moisture meter
- K-PCE-MB 120C: Moisture meter
- K-PCE-MB 210: Moisture meter
Optional Accessories
- K-CAL-PCE-MB: ISO calibration certificate
- K-PCE-SOFT-MB: Software with RS-232 cable
- K-PCE-MB-PS: Aluminium sample pans, pack of 50
- K-PCE-MB-GF: Glass fibre filter circle, pack of 100
- K-CW-F1-10: Class F1 weight, 10 g
- K-CW-F1-50: Class F1 weight, 50 g
- K-CW-F1-100: Class F1 weight, 100 g
- K-CW-F1-200: Class F1 weight, 200 g
PCE-MB C Series
Moisture Analyser / Mini Kiln for Determining the Absolute Moisture in Nearly all Materials and Substances
This series offers advanced moisture analysis with a touch screen interface.
- For determining the moisture of substances such as pellets, biomass, sewage sludge, used paper, slurry, powder, granulates, pastes, coatings, ...
- Integrated viewing window to watch the drying process
- Temperature range of +50 ... +160 °C / resolution starting from 0.001 g
- RS-232 and USB interface / software for PC optionally available
Image of a PCE-MB C Series moisture analyzer, showing its touch screen display and sample pan.
Technical Specifications
| Model | Max. weighing range | Resolution d | Accuracy | Weighing platform |
|---|---|---|---|---|
| PCE-MB 60C | 60 g | 0.001 g | 0.03 g | Ø 90 mm |
| 0 ... 100 % absolute moisture | 0.01 % | 0.04 % | ||
| 100 ... 0 % dry content | 0.01 % | 0.04 % | ||
| PCE-MB 111C | 110 g | 0.01 g | 0.01 g | |
| 0 ... 100 % absolute moisture | 0.1 % | 0.04 % | Ø 90 mm | |
| 100 ... 0 % dry content | 0.01 % | 0.04 % | ||
| PCE-MB 120C | 120 g | 0,001 g | 0.03 g | Ø 90 mm |
| 0 ... 100 % absolute moisture | 0.01 % | 0.04 % | ||
| 100 ... 0 % dry content | 0.01 % | 0.04 % | ||
| PCE-MB 210C | 210 g | 0.001 g | 0.03 g | Ø 90 mm |
| 0 ... 100 % absolute moisture | 0.01 % | 0.04 % | ||
| 100 ... 0 % dry content | 0.01 % | 0.04 % |
| Parameter | Value |
|---|---|
| Weighing range | +50 ... +160 °C |
| Taring range | Throughout full range |
| Calibration | Possible with external calibration weight (optionally available) |
| Heater | 2 x 60 W halogen lamps |
| Drying indication | Moisture [%] / weight loss, dry mass [%] absolutely dry / residual mass, date & time |
| Memory | 20 positions (to save material-specific drying processes, curve diagrams) |
| Display | Large graphical display with menu in numerous languages (DE / GB / ES / PL) |
| Interface | RS-232 and USB interface |
| Power supply | 230 V / 50 Hz |
| Operating conditions | +18 ... +30 °C |
| Dimensions / weight | 235 x 245 x 260 mm / approx. 3.8 kg |
Includes
- Moisture analyser (one of the models)
- 10 x aluminium sample pans
- Mains cable
- Instruction manual
Item No. / Item:
- K-PCE-MB 60C: Moisture analyser
- K-PCE-MB 111C: Moisture analyser
- K-PCE-MB 120C: Moisture analyser
- K-PCE-MB 210C: Moisture analyser
Optional Accessories
- K-CAL-PCE-MB: ISO calibration certificate
- K-PCE-SOFT-MB: Software including RS-232 cable
- K-PCE-MB-PS: Aluminium sample pans 50 pcs.
- K-PCE-MB-GF: Glass fibre filter circles, 100 pcs.
- K-CW-F1-10: Weight cl. F1, 10 g
- K-CW-F1-20: Weight cl. F1, 20 g
- K-CW-F1-50: Weight cl. F1, 50 g
- K-CW-F1-100: Weight cl. F1, 100 g
- K-CW-F1-200: Weight cl. F1, 200 g
PCE-MA 110
Moisture Analyser for Incoming Goods
This analyser is used for incoming goods control of various materials.
- Incoming goods control: food, pellets, granulates,...
- Calibration function for re-adjustment
- Increased heating capacity up to +199 °C
- Resolution 0.01 mg
- Halogen lamps
Image of the PCE-MA 110 moisture analyser, showing its weighing mechanism and display.
Technical Specifications
| Parameter | Value |
|---|---|
| Weighing range | 110 g |
| Resolution | 10 mg / 0.01 mg |
| Heater | Halogen lamps |
| Temp. range | +40 ... 199 °C |
| Heat-up time | 1 ... 99 min, adjustable |
| Moisture range | 0 ... 100 % |
| Resolution | 0.2 % |
| Memory | 15 set of data |
| Interface | RS-232 |
| Display | LCD, 9 membrane keys |
| Power supply | 220 V / 50 Hz |
| Dimensions | 200 x 180 x 380 mm |
Includes
- Moisture analyser
- Wind shield
- Sampling pans
- Mains cable
- Sampling pan holder / handle
- 100 g weight in plastic box
- Instruction manual
Item No.: K-PCE-MA 110
Optional Accessories
- K-CAL-PCE-MB: ISO calibration certificate
- K-PCE-MB-PS: Alum. sampling pans, 50 pcs.
- K-PCE-MB-GF: Glass fibre filter circles, 100 pcs.
DLT 100-3
Professional Moisture Analyser with Touch Screen up to 160 g
This professional analyser features a touch screen and advanced drying curve representation.
- Graphical representation of the drying curve, produced during drying process
- Tare without contact: 2 movement sensors customised for tare and / or printing
- Internal memory for the automatic execution of 300 drying programmes
- 400 W quartz glass halogen heater / menu in 6 languages
Image of the DLT 100-3 professional moisture analyser with its touch screen display and heating chamber.
Technical Specifications
| Parameter | Value |
|---|---|
| Meas. range | Max. +160 °C |
| Weighing range | Max. 160 g |
| Minimum weight | 50 mg |
| Resolution | 1 mg / 0.001 mg |
| Linearity | 2 mg |
| Reproductibility | 1 mg |
| Response time | 3 s |
| Display | LCD colour touch screen, 17 mm digits, 118 x 88 mm (W x H), high contrast with backlight. |
| Functions | GLP report, stand-by function, time indication |
| Operating menu | 6 languages: German, English, French, Italian, Spanish, Portuguese |
| Power supply | 220 V ... 240 V AC 50 Hz |
| Operating conditions | +5 ... +35 °C / 10 ... 80 °C r.h. |
| Display dimensions | 200 x 150 x 63 mm |
| Display cable length | 1 m |
| Case dimensions | 210 x 340 x 225 mm |
| Weighing chamber | Ø 100 mm |
| Case | Plastic |
| Weight | 5.5 kg |
Includes
- Moisture analyser
- Heating module
- Display terminal
- Sampling pans
- Connection cable
- Mains cable
- Mains adaptor
- Instruction manual
Item No.: K-DLT 100-3
Optional Accessories
- K-963-127: Calibration certificate DAkkS
- K-MLB-A01: Sampling pans 80 pieces
- K-RH-A02: Glass fibre filter circles, 80 pieces
- K-DLB-A01: Temperature calibration kit
- K-ALJ-A01: Protective cover
- K-SCD-4.0: Software balance connection
- K-572-926: RS-232 interface cable
