FEBUS Installation Instructions

Safety Notes

• Never work when voltage is present on the luminaire.
• The installation must be performed by a professional installer in compliance with the standards and regulations relating to electrical installations.
• Risk of electrostatic discharges (ESD Norm). Handle with precautions.
• Please observe the notes and steps described in the mounting instructions.

Maintenance Instructions

• Do not use chemicals or abrasives products to clean the fixture.
• Keep these instructions for dismantling or future maintenance.
• You can consult additional information about RESISTEX luminaires on the website www.resistex-sa.com.
• RESISTEX cannot be responsible for any misuse of the product.

Electrical Connection Diagram

The diagram shows the connection of the luminaire to the power supply. It includes an On/Off switch, a Driver, and the DOWN LIGHT. The wiring involves Live (L), Neutral (N), and positive (+) and negative (-) terminals for the driver.

Mounting / Installation Steps

The installation involves several steps, indicated by numbered diagrams:

1. Step 1: Shows a circular fixture with dimensions Ø140 mm and Ø220 mm, with a 360° rotation indicator.
2. Step 2: Illustrates inserting the luminaire into a ceiling cutout and connecting the wires (L and N) to the corresponding terminals.
3. Step 3: Depicts the luminaire being fitted into the ceiling opening, showing the spring clips engaging.
4. Step 4: Shows the fully installed luminaire flush with the ceiling.

Product Information

The FEBUS luminaire is associated with the product code 962532_NOT1.pdf and is described as FEBUS 2111lm Ø140 CCT REFLECTEUR OR.

Company Information

RESISTEX EXPLOITATION, 11 Quai de la Banquière CS 80010, 06730 Saint-André-de-la-Roche, France. Tel. 04 93 276 276 - Fax 04 93 276 280 - contact@resistex-sa.com. APE 2740Z - Siret 487 593 477 00010 - SAS CAPITAL 649979 - T.V.A. F.R. 73 487 593 477.