Propel Flex 2.0 Drone Manual

Product Overview

The Propel Flex 2.0 is a compact folding drone featuring an HD camera and advanced flight capabilities. This manual provides comprehensive instructions for setup, operation, and maintenance.

An image shows the Propel Flex 2.0 drone, a black folding quadcopter with four rotors. It is described as a 'Compact Folding Drone with HD Camera'. Specifications mentioned include 'ON BOARD HD CAMERA' and 'ON BOARD HD VIDEO' with resolution '1280 x 720 pixel' at '20 frames per second'.

WARNING: Never leave product charging unattended for extended periods of time. Always disconnect the battery from the charger immediately after the battery is fully charged. Please refer to enclosed safety instructions.

Package Contents

The package includes:

• FLEX 2.0™ Drone
• 2.4G Wireless Controller
• Spare Parts
• USB Charger
• Phone Holder
• Battery
• Instruction Manual

Colors and styles may vary slightly.

Features

• Compact fold-in design for easy portability.
• Air pressure sensor locks flight altitude for stable video footage.
• Takes video and still pictures with an onboard HD camera.
• 6-axis gyro for extremely stable flight and maneuverability.
• 3 speed settings suitable for beginners to advanced pilots.
• Wide range digital radio allows a flight range up to 91.44 m (300 ft).

Setup and Preparation

Remote Control Battery Installation

Diagram A illustrates the installation of four AAA batteries into the remote control. Unscrew the battery cover from the back of the controller, install 4 fresh "AAA" alkaline batteries, and replace the cover. Power on the controller to confirm battery installation.

Charging the FLEX 2.0™ Li-Poly Battery

Diagram B shows the Li-Poly battery being inserted into the charger. Diagram C illustrates connecting the USB end of the cable to a computer's USB port or a USB wall charger. Connect the battery to the charging cable; the red LED indicator will light off during charging and turn on when charging is complete. Average charging time is approximately 130-140 minutes with a 5.0V 2A USB wall charger. A fully charged battery provides 8-10 minutes of flight time. Additional batteries and chargers are available at www.amaxbrands.com.

IMPORTANT: ALWAYS REMEMBER TO UNPLUG YOUR CHARGING CORD WHEN NOT IN USE!

Install the Aircraft Battery

Diagram D shows the battery compartment on the drone. Insert the battery into the compartment and lock both ends with the battery locks.

Expand and Fold Your FLEX 2.0™

Diagram D2 illustrates how to expand the foldable arms of the drone. Before flying, turn the drone over (bottom side facing you) and carefully pull and expand all 4 arms until they are fully in position. After flying, it is recommended to fold all 4 arms back in. Be gentle when expanding or folding the arms.

FLEX 2.0™ Diagram

The FLEX 2.0™ diagram shows the drone with its camera at the front, a power button underneath, and four propellers labeled Propeller A and Propeller B.

Controller Diagram

The controller diagram labels the following controls: Throttle/Yaw, Speed Setting Button, Emergency Stop, 360° Stunt Rolls Button, Direction Control, buttons for taking photos and videos, Banking Trim controls, Throttle Trim, Moving Forward/Backward Trim, and the AUTO Start/Land button.

Flight Preparation

• Verify that 4 "AAA" batteries are installed in the remote control and the FLEX 2.0™ battery is fully charged.
• Ensure you are in a large open space, preferably a field or park with at least 60.96 m (200 ft) radius.
• Start your drone on a clean, flat, level surface before takeoff.
• IMPORTANT: Until experienced, avoid flying in windy conditions. Choose days with zero or extremely light wind for learning.

Syncing Your FLEX 2.0™

Important: When syncing, ensure the drone is on a flat level surface and digital trim settings are centered. Ensure the controller is off and the drone battery is removed. Make sure no other 2.4G devices are nearby. Insert the drone battery and place it on a flat surface. Press and hold the drone's power button for a few seconds (Diagram D1); the drone's red and white LED lights should flash rapidly. Quickly turn on the remote; its top red LED light will flash, and the drone lights will flash slower. Push the throttle stick all the way up, then pull it all the way down; you should hear a high-pitched beep. The lights on both the drone and controller will stop flashing and become solid, indicating successful syncing. Repeat steps 1-4 if syncing fails.

TIP 1: Minimize the time between inserting the drone battery and turning on the controller to avoid sync timeout.

TIP 2: Syncing indoors or in shade makes LED indicators easier to see.

Flying the Drone

Now You Are Ready to Fly!

After successful syncing, you are ready to fly. Familiarize yourself with starting/stopping rotors, auto-land, and control functions. For beginners, practice in a large open field on a calm day. Avoid flying too high until more experienced.

Recognizing the Front & Rear

The front of the FLEX 2.0™ is indicated by two white lights, while the rear is indicated by one red light (Diagram E).

Starting/Stopping the Rotors

You can start/stop rotors manually or automatically. Ensure the drone is synced and powered on.

• Manual Start/Stop: To start, move both control sticks down and outward until rotors spin, then release to neutral and push the throttle up for takeoff. To stop, wait about 10 seconds for automatic stop, or move both sticks down and outward again. After takeoff, pull the throttle all the way down to land.

Auto Start/Land

Press the AUTO START / LAND button on the controller for automatic takeoff or landing. You can still control direction to avoid obstacles during auto operations.

Speed Select Button

The drone has 3 speed settings: 1 (SLOW), 2 (MEDIUM), and 3 (HIGH). The default is SLOW. Press the speed setting button to cycle through speeds; 1 beep for slow, 2 for medium, 3 for high. Settings can be adjusted before or during flight.

Flight Control

This section introduces basic flight functions. For learning, fly in a large space with the drone facing away from you. As you master controls, you can move to advanced maneuvers.

Flight Practice

Practice simple vertical takeoffs, landings, turns, and rotations. Once mastered, progress to square and cross maneuvers. Diagrams illustrate Fixed-Point Landing, Square Pattern Maneuver, and Cross Pattern Maneuver.

Adjusting the Trim

The FLEX 2.0™ is pre-trimmed, but adjustments may be needed after crashes. Trim controls help balance the drone's flight:

• Forward/Backward Trim: If drifting forward, push the FORWARD/BACKWARD TRIM button downward repeatedly. If drifting backward, push it upward. (Diagram M)
• Bank Right/Left Trim: If banking left, push the BANKS TRIM button to the right repeatedly. If banking right, push it to the left. (Diagram N)
• Spin Left/Right Trim: If spinning left, push the LEFT/RIGHT TURN TRIM button to the right repeatedly. If spinning right, push it to the left. (Diagrams O, P)
• Throttle Trim: If ascending unexpectedly, push the Throttle TRIM button downward. If descending unexpectedly, push it upward. (Diagram q)

A single long beep indicates the product is center-trimmed. No sound means trim is at maximum on that side.

EMERGENCY STOP: Press the "speed setting button" and "stunt button" simultaneously to stop the drone blades from spinning. Use this if you lose control.

Calibrating the FLEX 2.0™

Recalibration may be needed after crashes affect the gyro sensors. Place the FLEX 2.0™ on a flat level surface. Ensure it's on and the controller is synced. Do not start the blades. Move both throttles and the control stick down and to the right corner for 5 seconds (Diagram R). The drone's lights will flash rapidly and then stop, indicating calibration is complete.

Troubleshooting Calibration: If lights don't flash, remove the drone battery, turn off the controller, and restart. Ensure the battery is inserted first, then the controller is turned on. Push the left throttle stick up and then down; a beep confirms sync and readiness for calibration.

Performing 360° Stunt Rolls

To perform stunt rolls: 1. Hover the drone at least 5 feet clear, set speed to mode 2 or 3. 2. Press the 360 stunt button (Diagram S); rapid beeping indicates stunt mode. 3. Quickly push the right control stick in the desired direction (Diagram T) for a right or left roll.

Note: Press the stunt button again to exit stunt mode without flipping.

Live Video Streaming and App Integration

Live Video Streaming Setup

The FLEX 2.0™ features an onboard digital camera for video and still photos sent to mobile devices.

What You Will Need

• One Apple or Android phone (not included).
• Propel 1890 APP installed (available on app stores).

Phone Holder and Phone Installation

Diagram U shows how to attach the included phone holder hook (a) to the slots on top of the controller. This allows you to securely hold your phone.

Propel Flex 2.0™ WiFi App Installation

Ensure you have a compatible Android™ or Apple® iOS device with internet access. For iOS, search for "Propel 1890" in the App Store and install. For Android, visit the Google Play store, search for "Propel 1890", and install. An icon for the "Propel 1890" app will appear on your screen; click it to run and verify installation.

Pairing FLEX 2.0™ to Your Compatible Device

1. After charging the drone battery, install it into the FLEX 2.0™.
2. On your device, go to Settings and locate the Wi-Fi option.
3. Turn ON Wi-Fi.
4. Select "Propel 1890" from the Wi-Fi list. The password is the 8 numbers attached to the network. Enter the password to connect.

Note: Apple® devices require iOS 7.0 or higher; ANDROID™ devices require OS 4.2.2 or higher.

Quick Start (Using the App)

1. Open the "Propel 1890" app. Tap "START" (bottom right) to see real-time video streaming.
2. To control via mobile device, tap the "ON" button (top right) to activate control sticks. Tap the "LAUNCH A LAND" icon ⬆️⬇️ to auto-launch or land.
3. Tap the camera icon ? to take still pictures. Tap the video icon ? to record videos (a timer will appear). Tap the gallery icon ?️ to view saved pictures and videos.

Detailed App Overview

App screenshots are provided for a detailed overview, also accessible via the "HELP" icon within the app.

If you encounter difficulties, contact customer service at www.amaxbrands.com.

Troubleshooting

Maintenance and Warnings

Replacing the Propeller Blades

The FLEX 2.0™ propeller system may require repair or replacement due to crashes. Diagram V identifies propeller blades: B & A on the front, A & B on the rear. Ensure correct markings match when replacing. Unscrew and remove the damaged blade, then replace it with the correct new blade. Secure the blade guard with a screw.

FLEX 2.0™ Warning

The FLEX 2.0™ is designed for OUTDOOR use. Its high-speed revolving blades can cause damage to users, spectators, and animals. Maintain a safe distance and warn spectators of your flight path. Before flight, inspect rotor blades to ensure they are securely fastened.

General Warnings

• Choking/Cutting Hazard: Contains small parts and sharp rotor blades.
• Keep hands, hair, and loose clothing away from propellers when the drone is powered ON.
• Turn off the transmitter and drone power when not in use.
• Use only the included charger for the FLEX 2.0™ Li-Poly battery; do not use it for other batteries.
• New alkaline batteries are recommended for maximum performance.
• Parental supervision is recommended when flying the FLEX 2.0™.

Battery Warnings

• Rechargeable Battery: Dispose of Li-Poly batteries properly according to local requirements if they no longer hold a charge.
• Controller Batteries: Requires 4 "AAA" batteries (included). Do not mix battery types (alkaline, carbon-zinc, NiMH), old and new batteries. Do not recharge non-rechargeable batteries. Rechargeable batteries must be removed before charging and charged under adult supervision. Exhausted batteries must be removed immediately and recycled/disposed of properly. Do not short-circuit terminals. Use only recommended battery types. Insert batteries with correct polarity. Do not dispose of batteries in fire, as they may leak or explode.

Care and Maintenance

• Always remove batteries from the remote control when not in use for extended periods.
• Clean the remote control and drone with a clean, damp cloth.
• Keep the toy away from direct heat or sunlight.
• Do not submerge the toy in water, as this can cause irreparable damage.
• Parental guidance is recommended when installing or replacing batteries.

Warranty and Support

Limited 90-Day Warranty

AMAX Group USA warrants this product against electrical or mechanical defects for 90 days from the purchase date. To claim warranty service, the unit must be returned postage prepaid and insured, along with the original receipt, to the warranty center. The warranty covers normal consumer use and excludes damage from shipment, alterations, accident, misuse, abuse, neglect, wear and tear, inadequate maintenance, commercial use, or unreasonable use. Removal of parts voids the warranty. This warranty does not cover repairs attempted by third parties. Implied warranties are limited to 90 days. Consequential or incidental damages are excluded.

Repair/Replace Product

If the product malfunctions, contact the AMAX warranty center. A return authorization (RMA) number and shipping address will be provided if a return is necessary. AMAX reserves the right to repair, replace, or refund the product.

Important Notice for Returns

Returns without an AMAX-issued RMA form and number will be rejected and returned to the sender. Contact the warranty center before attempting a return.

Preparation for Shipping Your Product

Repack the product in a durable box (preferably original carton), prepaid and adequately insured. Include the RMA form, your daytime phone number, and email address. For service after warranty expiration, contact customer care at customercare@amaxbrands.com.

Important Notice for Shipping

DO NOT SHIP YOUR PRODUCT BACK WITHOUT FIRST CONTACTING THE WARRANTY DEPARTMENT AT: www.amaxbrands.com, Email: care@amaxglobal.com, Phone: 1-866-360-1510.

Regulatory Information

FCC Part 15 C Notice

CAUTION: Modifications not expressly approved by the responsible party could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in residential installations. The equipment generates, uses, and can radiate radio frequency energy. If not installed and used per instructions, it may cause harmful interference to radio communications. There is no guarantee that interference will not occur. If interference occurs, users are encouraged to try one or more of the following measures: reorient/relocate the receiving antenna, increase separation between equipment and receiver, connect to a different circuit, or consult a dealer/technician.

This device complies with Part 15 of the FCC Rules, subject to two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC/IC radiation exposure limits for an uncontrolled environment and should be installed/operated with a minimum distance of 20cm between the radiator and your body.

Industry Canada Notice: Canada Only

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's license-exempt RSS(s). Operation is subject to two conditions: 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation.

This product is manufactured by Amax Group, 12645 Memorial Drive Suite F1 #388 Houston, TX 77024. Propel™ and Propel RC™ are licensed trademarks of Rooftop Group LTD Singapore. ©2020 All rights reserved. Visit www.propelrc.com.

CAN ICES-3(B)/NMB-3(B): This product meets applicable Innovation, Science and Economic Development Canada technical specifications and conforms to safety requirements of FCC, RSS247, RSS210.

Distributed by Costco Wholesale Canada Ltd., 415 W. Hunt Club Road, Ottawa, Ontario K2E 1C5, Canada. Phone: 1-800-463-3783. Website: www.costco.ca.

WARNING! CHOKING HAZARD - Small parts. Not suitable for children under 3 years.

Made in China. Model: CT-6168. Version: C004-CA-V1.0.