Belkin Malibu MagSafe Wireless Charger

Die Layout

The die layout outlines the specifications for the packaging material. It features a grid system for cutting and folding the material. The main section shows a large rectangular area with dimensions 571.5 [22+1/2] inches horizontally and 76.2 [3] inches vertically, divided into 5 columns and 4 rows. A separate section, labeled 'FCC/Legal Statement 70 gsm Wood Free Paper', also displays a grid layout with similar proportions. Below these, a representation of printed panels indicates where legal statements would be placed.

Die Line Specifications

• Die Line File: IDL_WIA004_MALIBU MAGSAFE WIRELESS CHARGER
• Artwork File: [Not Specified]
• Business Unit: Core
• Program Manager: [Not Specified]
• Packaging Engineer: Matthew Duffy
• Retail Outside Dimension (Including Hang Tab): L x W x D (in): [Not Specified]
• Retail Outside Dimension (Including Hang Tab): L x W x D (mm): [Not Specified]
• Die/Material Specs:
• Material: 350gsm C1S SBS (20pt)
• Blank Size (in): 51.207 x 21+3/8
• Blank Size (mm): 1300.670 x 542.925
• SKUs Supported: Universal
• Unit: IN/MM
• Side Shown: PRINT SIDE
• Flute/Grain: horizontal
• Tolerance: +/- 1/32" - 0.8mm
• Drawing Scale: 1:1
• Release Date: 12/29/2020
• Dieline: Intermediate

Product Information

Product Name: Portable Wireless Charger Pad with MagSafe

SKU/Model: WIA004

This document and the information within are the confidential property of Belkin International and must not be copied, reproduced, or used in any manner without the written consent of Belkin Corporation. It must be returned upon request.

Technical Specifications

The above information is also available as part of EU declaration of conformity at www.belkin.com/doc.

Regulatory and Safety Information

This document contains important regulatory and safety information. The primary language of this information is English. Other languages are available within the original document.

General Safety Instructions

WARNING: Failure to follow these instructions could result in fire, electric shock, injury, or damage to the user, product, or other property.

• Connect the wall adapter of the wireless charger into a power outlet that is close by and is easy to disconnect from the source.
• Use indoors and in a dry location only; Avoid charging near sources of heat and humidity.
• Keep the wireless charger and wall adapter away from any liquids or moisture.
• Unplug the wireless charger when not in use for long periods of time.
• Do not store your device in very hot or very cold locations. It is recommended to use your device at room temperature.
• Do not use if visible defects are observed on the wireless charger or wall adapter.
• Do not attempt to service, modify, or disassemble the wireless charger or wall adapter.
• Use of a wall adapter not recommended or sold by Belkin may result in an increased risk of fire, electric shock, injury, or damage to the user, product, or other property.
• Keep this device out of reach of children to prevent them from playing with it.

CAUTION: If you experience problems with the wireless charger, please discontinue use, unplug the wall adapter from the AC socket, and contact Belkin for assistance. The marking information is located on the bottom of the apparatus.

FCC Statement

DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY

Belkin International, Inc., of 12045 E. Waterfront Drive, Playa Vista, CA 90094, Tel: +1(310) 751 5100, declares under our sole responsibility that the product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the distance between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.

Radiation Exposure Statement

The product complies with the FCC portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. Further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available.

The product complies with the Canada portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. Further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available. This digital apparatus complies with CAN ICES-3(B) / NMB-3(B).

EU Declaration of Conformity

Belkin International, Inc., declares that the radio equipment is in compliance with Directive 2014/53/EU and RoHS Directive 2015/863. The full text of the EU declaration of conformity is available at the following Internet address: www.belkin.com/doc.

Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.

Frequency band in which the radio equipment operates: 360 kHz

Maximum power transmitted: -5 dBuA/m

Waste Electrical and Electronic Equipment (WEEE) Directive

Disposal Information for User: Pursuant to and in accordance with Article 14 of the Directive 2012/19/EU of the European Parliament on waste in electrical and electronic equipment (WEEE). The symbol of the crossed-out bin ?️❌ indicates that the product, at the end of its useful life, must be collected separately from other waste. Therefore, any product that has reached the end of its useful life must be given to waste disposal centers specializing in separate collection of waste electrical and electronic equipment, or given back to the dealer when purchasing a new WEEE, pursuant to and in accordance with Article 14 as implemented in the country. The adequate separate collection for the subsequent start-up of the equipment sent to be recycled, treated and disposed of in an environmentally compatible way contributes to preventing possible negative effects on the environment and health, and optimizes the recycling and reuse of components making up the electronic equipment. Abusive disposal of the product by the user involves application of the administrative sanctions according to the laws in force. For information on product disposal, please refer to http://www.belkin.com/uk/weee-regulations/.

Other Compliance Information

UKCA Conformity: Radio Equipment Regulations 2017 (S.I. 2017/1206)

Brazil: Este equipamento não tem direito à proteção contra interferência prejudicial e não pode causar interferência em sistemas devidamente autorizados. Este produto está homologado pela Anatel. Para maiores informações, consulte o site da Anatel: www.anatel.gov.br.

EAC Mark: Compliance with EAC technical regulations (TR CU 020/2011, LVE TR CU 004/2011).

Electrical Static Discharge (ESD): Under certain usage scenarios, ESD phenomenon may occur and caused your iPhone to stop charging while on MagSafe. If this happen, simply unplug the power adapter to reset the system.