Belkin BoostCharge Pro 2-in-1 Wireless Charging Dock with MagSafe

Safety Instructions

WARNING: Failure to follow these instructions could result in fire, electric shock, injury, or damage to the user, product, or other property.

• Connect the power supply of the wireless charger into a power outlet that is close by and is easy to disconnect from.
• Use indoors and in a dry location only; Avoid charging near sources of heat or humidity.
• Keep the wireless charger and power supply away from any liquids or moisture.
• Unplug the wireless charger when not in use for long periods of time.
• Do not store your device in very hot or very cold locations. It is recommended to use your device at room temperature.
• Do not use if visible defects are observed on the wireless charger or power supply.
• Do not attempt to service, modify, or disassemble the wireless charger or power supply.
• Use of a power supply not recommended or sold by Belkin may result in an increased risk of fire, electric shock, injury, or damage to the user, product, or other property.
• Wireless charging power transmission rate is regulated by the wireless charging device receiving power which can be influenced by factors like, but not limited to, proprietary charging protocols, ambient temperature, current battery percentage level and age of the device being charged.

CAUTION: If you experience problems with the wireless charger, please discontinue use, unplug the power supply from the socket, and contact Belkin for assistance.

The marking information is located on the bottom of the apparatus.

Radiation Exposure Statement

This equipment complies with the radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.

North America - FCC Declaration of Conformity

We, Belkin International, Inc., of 555 S. Aviation Blvd., Suite 180, El Segundo, CA 90245, USA, Tel: +1(310) 751 5100, declare under our sole responsibility that this product BoostCharge Pro 2-in-1 Wireless Charging Dock with MagSafe, Model: WIZ020 complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Federal Communications Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the distance between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

Innovation, Science, and Economic Development Canada Statement (ISED)

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Europe - CE Declaration of Conformity

We, Belkin International, Inc., declare that the radio equipment is in compliance with the Radio Equipment Directive 2014/53/EU, RoHS Directive 2011/65/EU + 2015/863, and WEEE Directive 2012/19/EU.

The full text of the EU declaration of conformity is available at the following Internet address: www.belkin.com/doc

Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

Radiation Exposure Statement: This equipment complies with radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.

Frequency band in which the radio equipment operates: 127.7 kHz, 360 kHz, 326.5 kHz, 1.778 MHz

Maximum power transmitted: -8.17 dBµA/m @10m

UKCA Conformity

We, Belkin International, Inc., declare that the radio equipment is in compliance with Radio Equipment Regulations 2017, RoHS Regulations 2012, and WEEE Regulations 2013.

The full text of the UKCA declaration of conformity is available at the following Internet address: www.belkin.com/doc

Waste Electrical and Electronic Equipment Directive (WEEE)

For information on product disposal, please refer to http://www.belkin.com/uk/weee-regulations/

Pursuant to and in accordance with Article 14 of the Directive 2012/19/EU of the European Parliament on waste in electrical and electronic equipment (WEEE).

The barred symbol of the rubbish bin shown on the equipment indicates that, at the end of its useful life, the product must be collected separately from other waste.

Therefore, any product that have reached the end of their useful life must be given to waste disposal centers specializing in separate collection of waste electrical and electronic equipment or given back to the dealer when purchasing a new WEEE, pursuant to and in accordance with Article 14 as implemented in the country.

Information for end-users as per COMMISSION REGULATION (EU) 2019/1782

The above information is also available as part of EU declaration of conformity at the following Internet address: www.belkin.com/doc.