Belkin BoostCharge™ Pro

Product Overview

The Belkin BoostCharge™ Pro is a fast wireless charger designed for Apple Watch and also functions as a 10,000mAh power bank. It features a sleek, portable design with a circular indentation for the Apple Watch and a power bank unit. The device is white and includes indicator lights.

Product Name: Apple Watch Charger Power Bank 10K

Model: BPD005

Important Safety Instructions

WARNING: When using this product, basic precautions should always be followed:

• Read operating instructions, including charging and temperature information.
• Close supervision is necessary when used near or by children.
• For indoor and dry location use only. Do not expose to rain or snow.
• Keep away from heat sources, direct sunlight, combustible gas, humidity, water, or other liquids.
• Use only as recommended to avoid risk of fire or injury.
• The power bank generates heat when charging; always charge in a well-ventilated area. Do not charge under pillows, blankets, inside purses, or on flammable surfaces.
• Do not use if visible defects are observed, or if the product has been wet, damaged, or modified. Contact dealer or Belkin for assistance.
• Do not disassemble, open, microwave, incinerate, paint, or insert foreign objects into the power bank.
• Do not use the power bank in excess of its output rating; overload may result in fire or injury.
• Do not expose to fire or excessive temperature (above 100°C) as it may cause explosion.
• Do not subject to mechanical shock (crushing, bending, puncturing, shredding). Avoid dropping or placing heavy objects on it.
• Do not short-circuit the power bank or store it where it may be short-circuited by other metallic or conductive objects.

Operating Conditions: 0° C to 35° C

Compliance Information

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) it must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, providing reasonable protection against harmful interference in a residential installation. If interference occurs, users are encouraged to try correcting it by reorienting/relocating the antenna, increasing distance, connecting to a different circuit, or consulting a dealer/technician.

FCC Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.

Radiation Exposure Statement: The product complies with FCC portable RF Exposure limits for an uncontrolled environment and is safe for intended operation. Further reduction is possible by keeping the product as far as possible from the user's body.

Industry Canada Statement

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence exempt RSS(s). Operation is subject to two conditions: (1) This device may not cause interference, and (2) it must accept any interference, including interference that may cause undesired operation.

This digital apparatus complies with CAN ICES-003(B) / NMB-003(B).

Radiation Exposure Statement: The product complies with Canada portable RF Exposure limits for an uncontrolled environment and is safe for intended operation. Further reduction is possible by keeping the product as far as possible from the user's body.

Simplified EU Declaration of Conformity

Belkin International, Inc. declares that the radio equipment complies with Radio Equipment Directive 2014/53/EU, EMC Directive 2014/30/EU, Low voltage Directive 2014/35/EU, ErP Directive 2009/125/EC, RoHS Directive 2011/65/EU, and WEEE Directive 2012/19/EU.

The full text of the CE declaration of conformity is available at: www.belkin.com/doc

Simplified UKCA Declaration of Conformity

Belkin International, Inc. declares that the radio equipment complies with Radio Equipment Regulations 2017, Electromagnetic Compatibility Regulations 2016, Electrical Equipment (Safety) Regulations 2016, RoHS regulation 2012, and WEEE Regulation 2013.

The full text of the UKCA declaration of conformity is available at: www.belkin.com/doc

CE 🇪🇺 UKCA 🇬🇧

Disposal Information for User

For information on product disposal, please refer to www.belkin.com/uk/weee-regulations/.

The barred symbol of the rubbish bin ?️ indicates that at the end of its useful life, the product must be collected separately from other waste. Products reaching the end of their useful life must be given to specialized waste disposal centers or returned to the dealer when purchasing new WEEE-compliant equipment.

Proper collection and disposal contribute to preventing negative environmental and health effects and optimize recycling and reuse of components.

Abusive disposal may result in administrative sanctions according to applicable laws.

Technical Specifications

• Input USB-C PD: 5.0V 3.0A, 9.0V 2.22A
• Output USB-C PD: 5.0V 3.0A, 9.0V 2.22A
• Frequency band: 326.5kHz, 1.778MHz
• Maximum power transmitted: -23.10 dBµA/m @ 10m

Instructions relatives au risque d'incendie ou de blessure (French Safety Notes)

Énoncé d'Industrie Canada: L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: 1) L'appareil ne doit pas produire de brouillage; 2) L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

Déclaration d'exposition aux radiations: Le produit est conforme à la limite d'exposition aux RF portables au Canada établie pour un environnement non contrôlé et est sans danger.