User Guide

Luther Kids' House Bed Frame

Model: SLTHRKBDSNA

Components

The following parts are included in the package:

• 1: Front Left Upright
• 2: Rear Left Upright
• 3: Front Right Upright
• 4: Rear Right Upright
• 5: End Board (x2)
• 6: Front Left Roof
• 7: Front Right Roof
• 8: Rear Roof (x2)
• 9: Roof Slats (x3)
• 10: Rear Rail
• 11: Lower panel
• 12: Front Rail
• 13: Bed Slats (x13)

A detailed diagram shows the arrangement of these components.

Hardware and Tools Required

Hardware:

• A: M6x90 Screw (x8)
• B: Cam Connector (x24)
• C: M6x70 Screw (x16)
• D: Dowels (x30)
• E: Ø6x90 Screw (x6)
• F: Ø6x80 Screw (x4)
• G: Allen Key
• H: Ø4x30 Screw (x26)

Tools Required:

• Phillips Head Screwdriver
• Flat Blade Screwdriver
• Hammer

Assembly Instructions

1. Attach Dowels (D) to parts 9 (x3), 10, 11, and 5 (x2) in the indicated positions. A diagram illustrates the dowel placement.
2. Attach the Front Left Upright (1) and Rear Left Upright (2) to one of the End Boards (5) using 4 M6x90 Screws (A) and 4 Cam Connectors (B). A close-up diagram shows the connection detail.
3. Attach the Front Right Upright (3) and Rear Right Upright (4) to the other End Board (5) using 4 M6x90 Screws (A) and 4 Cam Connectors (B). A diagram illustrates this step.
4. Attach the two upright assemblies to the Lower Panel (11) and Rear Rail (10) using 10 M6x70 Screws (C) and 10 Cam Connectors (B). A diagram shows the assembly process, with a close-up view of the connections.
5. Attach the Front Left Roof (6) to one of the Rear Roofs (8) using a Dowel (D) and an Ø6x90 Screw (E).
6. Attach the Front Right Roof (7) to the other Rear Roof (8) using a Dowel (D) and an Ø6x90 Screw (E). Diagrams illustrate these roof assembly steps.
7. Attach the two assembled roof sections to the bed frame using 4 Dowels (D) and 4 Ø6x90 Screws (E). A diagram shows the roof assembly being attached to the main frame, with a detailed view of the connection points.
8. Attach the 3 Roof Slats (9) to the bed frame using 6 M6x70 Screws (C) and 10 Cam Connectors (B). A diagram illustrates the placement of the roof slats and their connections, with a close-up of the fastening points.
9. Attach the Front Rail (12) to the bed frame using 4 Ø6x80 Screws (F). A diagram shows the front rail being attached, with a close-up of the screw insertion.
10. Attach the 13 Bed Slats to the bed frame using 26 Ø4x30 Screws (H). A diagram illustrates the placement of the bed slats and the screw fastening, with a close-up of the screw detail.

Notes

This section is for user notes.