Sunshine Gazebo Shed

Parts List

Wall Parts

• Part A: Long vertical pole (x4)
• Part B: Long horizontal beam with connection points (x2)
• Part B1: Long horizontal beam with different connection points (x2)
• Part B2: Long horizontal beam with connection points (x2)
• Part B3: Long horizontal beam with connection points (x2)
• Part E: Short horizontal connector piece (x2)
• Part E1: Short horizontal connector piece (x2)
• Part E2: Short horizontal connector piece (x2)
• Part E3: Short horizontal connector piece (x2)
• Part J: Circular base plate with mounting holes (x4)
• Part K: Corner bracket (x4)
• Part K1: Corner bracket (x4)
• Part L: Small bracket/connector piece (x4)
• Part M: Small connector piece (x6)
• Part N: Small connector piece (x4)
• Part O: Small bracket/connector piece (x4)
• Part P: Small bracket/connector piece (x4)
• Part W: Hook or clip for curtains/panels (x96)
• Part X: Rectangular panel (x4)
• Part Y: Rectangular panel with grid pattern (x4)

Roof Parts

• Part C: Roof support beam (x4)
• Part D: Roof support beam (x6)
• Part F: Roof purlin (x4)
• Part F1: Roof purlin (x4)
• Part F2: Roof purlin (x2)
• Part G: Roof panel support (x4)
• Part G1: Roof panel support (x4)
• Part G2: Roof panel support (x2)
• Part G3: Roof panel support (x2)
• Part G4: Roof panel support (x2)
• Part G5: Roof panel support (x2)
• Part G6: Roof panel support (x2)
• Part H: Central roof connector piece (x1)
• Part I: Central roof connector piece (x1)
• Part Q: Small bracket/connector piece (x12)
• Part R: Small bracket/connector piece (x12)
• Part S: Triangular roof support piece (x4)
• Part S1: Triangular roof support piece (x4)
• Part T: Roof panel (x4)
• Part T1: Roof panel (x4)
• Part U: Roof panel (x4)
• Part U1: Roof panel (x4)
• Part V: Roof panel (x2)
• Part V1: Roof panel (x2)
• Part V2: Roof panel (x2)

Hardware (Screws)

• AA (M6*20): x92
• BB (M6*15): x104
• CC (M5*15): x24
• DD (M5*15): x4
• M6*50: x12 (long screw)

Tools Included

• X1: Screwdriver (x1)
• X2: Allen wrench (x1)

Assembly Steps

Step 1

Prepare two identical base frame sections. Attach part N to the ends of parts B and B2. Secure each connection with two BB screws. This step requires 16 BB screws in total (8 per section).

Visual Description: Two long beams (B, B2) are shown with a smaller connector (N) attached to each end.

Step 2

Connect part B1 to the ends of parts B and B3. Attach part B2 to part B3. Use two AA screws for one connection and 18 BB screws for the remaining connections across these assemblies.

Visual Description: Shows the connection of B1 to B and B3, and B2 to B3, using various screws.

Step 3

Assemble the main frame. Connect parts B1, B2, and B3 to the main beam B. Use parts O as connectors. Secure with 8 CC screws and 4 DD screws.

Visual Description: Illustrates connecting the side beams (B1, B2, B3) to the central beam (B) using connector pieces (O) and screws (CC, DD).

Step 4

Attach short horizontal connector pieces (E, E1, E2, E3) to the frame. Each piece is secured with multiple hooks/clips (W). E, E1, E2, E3 use 5 or 7 clips each, totaling 96 clips (W) for this step.

Visual Description: Shows the short horizontal pieces being attached to the main frame using numerous small clips.

Step 5

Continue attaching the short horizontal connector pieces (E, E1, E2, E3) to the frame. Secure these pieces using 24 BB screws.

Visual Description: Further attachment of the short horizontal pieces to the frame using BB screws.

Step 6

Prepare the vertical support poles. Attach circular base plates (J) to the bottom of each vertical pole (A) using two AA screws per plate. Also, attach small connector pieces (L) to the poles.

Visual Description: Shows base plates (J) and connectors (L) being attached to the bottom of vertical poles (A).

Step 7

Assemble the first two vertical support structures. Connect vertical poles (A) with horizontal beams (B, B1). Secure each connection with two AA screws. This step is repeated twice (x2).

Visual Description: Two vertical poles (A) are shown connected by horizontal beams (B, B1), secured with AA screws.

Step 8

Attach corner brackets (K1, K) to the frame structure. Secure these brackets using BB screws (x16).

Visual Description: Corner brackets (K1, K) are attached to the frame joints using BB screws.

Step 9

Continue building the main frame by connecting horizontal beams. Secure connections with AA screws (x12).

Visual Description: Shows the frame structure expanding with more horizontal beam connections secured by AA screws.

Step 10

Add more horizontal supports and connectors (M) to the frame. Secure these components using AA screws (x12) and BB screws (x16).

Visual Description: Further frame assembly with horizontal supports and connectors (M) being fastened with AA and BB screws.

Step 11

Attach brackets (P) and connector pieces (CC) to the top corners of the main frame. Secure them with CC screws (x16).

Visual Description: Brackets (P) and connectors (CC) are attached to the upper corners of the gazebo frame.

Step 12

Install the initial roof support beams (C, H). Connect these beams to the frame. Use AA screws (x4) and BB screws (x8) for these connections.

Visual Description: Roof support beams (C, H) are being attached to the top of the frame.

Step 13

Attach more roof support beams (D, H). Secure these beams to the frame using AA screws (x6) and BB screws (x6).

Visual Description: Additional roof support beams (D, H) are installed and secured.

Step 14

Install the central roof connector piece (I) at the apex of the roof structure. Secure it with AA screws (x2).

Visual Description: The central roof connector (I) is placed at the highest point of the roof frame.

Step 15

Attach various roof panel supports (G, G1, G2, G5, G6, S, S1, R) to the roof frame. Use screws AA (x10) for these attachments.

Visual Description: Numerous small support pieces (G, G1, G2, etc.) are being fixed to the roof structure.

Step 16

Install the first set of roof panels (T, T1, U, U1, V, V1, V2). Secure them to the frame using AA screws (x4). Connector pieces Q and G2 are also used.

Visual Description: Roof panels are being laid and attached to the supporting structure.

Step 17

Continue installing the remaining roof panels and support pieces (G, G1, T, T1, U, U1, F, F1, F2). Secure them with AA screws (x6).

Visual Description: More roof panels and supports are fitted onto the gazebo.

Step 18

Attach the final roof support pieces (G3, G4) to the frame. Secure these with AA screws (x10).

Visual Description: The last support pieces (G3, G4) are attached to complete the roof frame.

Step 19

Attach the wall panels (X, Y) to the sides of the gazebo. These panels are typically secured using the provided hooks/clips (W) or other fasteners as indicated in the original diagrams (not explicitly shown in steps 1-18 but implied by parts list).

Visual Description: The gazebo structure is shown with the wall panels being attached to the sides.