Kamoer X1 PRO T2 Stepper Micropump

FCC Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the device and receiver.
• Connect the device into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

FCC Radiation Exposure Statement: The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located for operating in conjunction with any other antenna or transmitter.

Warranty Service

1. Warranty Conditions

The warranty service is only valid for users who have correctly installed, used and maintained the product in accordance with the manual. All man-made faults or damages are not covered by the warranty. Please keep the proof of purchase in a safe place to obtain satisfactory after-sales service in a timely manner.

2. Warranty Coverage

Within one year from the date of purchase, if there is any damage caused by the manufacturing process or components, the company will provide free warranty service. The free maintenance service provided during the warranty period includes free repair, free replacement of faulty spare parts, and replacement of products that cannot be repaired with products of the same model. Free service does not include shipping costs incurred for product repairs.

3. Non-warranty Coverage

The following factors are not covered by the free warranty, and customer repairs are subject to fees:

• Product appearance (please confirm when purchasing).
• Improper use, maintenance, or storage (please use, maintain and store correctly according to the user manual).
• Access to inappropriate power supply.
• Damage to components caused by the short circuit of the circuit board due to the entry of various insects into the machine.
• Losses caused by accidents.
• Use of inappropriate spare parts (non-company spare parts are not applicable).
• Unauthorized handling, modification, or repair by persons not authorized by the company (please do not dismantle or repair without authorization).
• Failure or damage caused by use outside the applicable occasion.
• Damage caused by force majeure, etc.
• Consumable and wearing parts (pump tube, connector, connecting tube, etc.).
• The warranty period has expired.

Know X1 PRO T2

The X1 PRO T2 is remotely controlled via a mobile phone App and uses a long-life stepper motor. It can function as a dosing pump or a calcium reaction pump. As a dosing pump, it can flexibly and accurately replenish various elements required for marine organisms, such as calcium, magnesium, KH enhancer, and trace elements, into the marine biological tank. This automatic addition greatly reduces the workload of manual addition and avoids errors like missed, excessive, or insufficient addition. When used as a calcium reaction pump, it can provide a stable flow of water to the calcium reactor.

Product Diagram

The Kamoer X1 PRO T2 Stepper Micropump features the following components:

• 1. Display: Shows operational status and information.
• 2. Adjustment knob: Used for adjustments and control.
• 3. Inlet: Port for fluid intake.
• 4. Outlet: Port for fluid output.
• 5. DC24V: Connector for the 24V DC power adapter.

Download the App

To download the Kamoer Remote application:

1. Scan the QR code provided [QR Code for App Download] to find the application download for iOS and Android.
2. Alternatively, Apple users can search the App Store, and Android users can search the Google Play Store for "Kamoer Remote" to find the corresponding application.

Note: This app supports Apple devices with iOS 9.1 and above, and Android devices with Android 4.4 and above.

Register Account

Open the Kamoer Remote App and select either the phone registration or email registration method. Follow the app guidelines to complete the account registration.

Note: Region selection is very important, and selection errors will cause network allocation issues. It is recommended to select the region by scanning the device's QR code.

App Interface Description (Registration & Login)

Screenshots illustrate the app interface for selecting a login mode (Phone or Email) and entering login credentials (Username, Password) with options to Register or Reset Password.

View the Tutorial

On the device list page within the app, click the "?" icon in the upper right corner to enter the "Tutorial" page. Select "X1 PRO T2" to view the tutorial, which includes the user manual and frequently asked questions.

App Tutorial Menu

The tutorial menu lists various Kamoer models including X2S R, X5 S, X4 PRO, KWC, DRIP PRO, DDP4, DDP4 PRO, and X1 PRO T2, with options for "User manual" and "FAQ".

Display Description

The device display provides information on its status and operation:

• a. Work Mode: Indicates the functional position of the interface and the operating mode, showing if the machine is working on the home page.
• b. Work Status Indication: In the non-lock screen state, pressing the button starts the pump, displaying "in operation...". Pressing the button again while the pump is working stops it.
• c. Network Connection Status Indication:
  • NET O: Indicates that the network is normal, allowing the device to be operated via an App connection.
  • NET S: Indicates that the device is in the distribution network state, requiring user network completion before normal networking.
  • NET F1: Indicates that the device failed to connect to the router.
  • NET F2: Indicates that the device successfully connected to the router but failed to connect to the cloud.
• d. Flow Display: Shows the flow rate of the pump, which can be adjusted by operating the knob while the pump is running.
• e. Lock Screen Status: If the user does not operate the device for a long time, the device screen will enter the screen protection state, displaying an 'L' letter. To operate the device, the knob must be used to unlock the screen.
• f. App Control: When the interface is controlled by the phone app, the device's knob cannot control the device.

Connect Your X1 PRO T 2 to the Cloud

This device supports knob operation and mobile app remote control. To control the device via the mobile phone app, you need to first configure it to connect to the Wi-Fi network. The specific operation steps are as follows:

Prerequisites: The wireless router must be connected to the Internet, and your mobile phone must be connected to the router's 2.4G Wi-Fi hotspot. (Note: The device does not support 5G Wi-Fi and cannot use 5G Wi-Fi hotspots).

Configuration Steps:

1. Open the Kamoer Remote App, log in with your registered account, click the "+" icon in the upper right corner, select "Add device", and choose "X1 PRO T 2" from the list of supported devices.
2. After inputting the Wi-Fi password, operate the device knob to make the device enter the network configuration state, and complete the network configuration according to the interface prompt.
3. Configure Network by Router: If you select to configure the network by router, the device will display "Sta Setting". Switch to "By Router" in the upper right corner of the corresponding mobile App interface. Click the "Sta Setting..." button to enter the configuration. Wait for the network configuration to complete.
4. Configure Network by AP: If you select to configure the network by AP, the device will display "AP Setting". Select "Connect by AP" in the app interface of the corresponding mobile phone, and click the "AP Setting..." button to enter the configuration. Complete the network configuration according to the interface prompt.

After the connection is successful, the App will prompt that the connection is successful. At this time, the device will return to the home page, and "net o" will be displayed in the upper right corner, indicating that the device has been connected to the cloud. The user has also completed the binding of the App and device.

Bind X1 PRO T 2

There are two ways for a user app to bind a device:

1. Connect to Network Again: Bind the device by reconnecting it to the network.
2. Cloud Connection: If the device is already connected to the cloud via a wireless router, connect your phone to the same wireless router. The app will display the locally available devices; click the corresponding "binding" button to bind the device.

Unbind

Press the corresponding device icon on the device list page, pop up the "Remove" icon at the bottom, and click the "Remove" icon to unbind.

Note

• Please use the appliance with your own power adapter and work in a specified work environment.
• This product only supports 2.4G Wi-Fi; it does not support 5G Wi-Fi.
• The device should be placed in a reasonable position. The liquid connecting pipes should be as short as possible and suspended above the aquarium.
• Please carefully check whether the connection direction of the water inlet and outlet is correct; it must not be reversed.

Technical Parameters

Packing List