Beurer WL 75 Wake-up Light

Instruction Manual

Introduction

The Beurer WL 75 Wake-up Light allows you to wake up and fall asleep gently and naturally. The LED light gradually becomes brighter like a rising sun, allowing you to slowly become accustomed to the light conditions and gently preparing your body for waking up. You can also set a wake-up melody that is played following the simulated sunrise and provides an acoustic aid to help you wake up. Instead of an alarm tone, you can select the radio or various sounds. The Beurer WL 75 Wake-up Light provides a rested and pleasant start to your day and helps you drift comfortably off to sleep due to a simulated sunset with melodies.

Features

NOTE: The WL 75 Wake-up Light can only be used with its full functionality in conjunction with the 'beurer LightUp' app. Basic functions can also be set directly on the device.

The following functions can only be controlled via the app:

System Requirements for the ‘beurer LightUp' App

Package Content

Parts and Controls

LabelDescription
1Display
2On/Off button [power button]
3Touch sensor (for snoozing)
4Brightness buttons +/-
5Touch sensor (for illuminated display)
6[arrow-left]/[arrow-right] buttons
7AUX button
8Radio button
9Cable antenna
10Mains part connection
11USB connection (for charging smartphones)
12AUX input
13Alarm button
14Set button

To Set Up

  1. Remove the packaging material and check that all parts listed are present.
  2. Download the free ‘beurer LightUp' app from Apple App Store (for iOS devices) or Google Play (for Android™ devices).
  3. Place the device on a firm, even surface. The device must be placed near an easily accessible socket.
  4. Insert the power adapter connector into the power adapter jack on the rear of the device.
  5. Insert the power adapter into an electrical outlet. The time ‘0:00' appears in the device display.
  6. Place the antenna at the back.
  7. Activate Bluetooth® on your smartphone.
  8. Open the 'beurer LightUp' app and follow the instructions.
  9. Once the WL 75 is connected, the time on the Wake-up Light will update.

Device Functions

You can set device functions using the ‘beurer LightUp' app or the buttons on the Wake-up Light. We recommend using the app whenever possible since it provides better function control and convenience. When the Wake-up Light is connected to a smartphone, all the buttons on the Wake-up Light are locked. Once the smartphone and Wake-up Light are disconnected, you can use the buttons on the Wake-up Light again.

8.1 Setting the time/date

NOTE: You can set the time and date using the ‘beurer LightUp' app or the buttons on the Wake-up light. If you connect the Wake-up light to your smartphone using the 'beurer LightUp' app, the time and date are automatically set on the Wake-up light.

To set the time using the buttons on the Wake-up light, proceed as follows:

  1. Press the Set button on the device three times. ‘SET Time' appears on the display. Wait three seconds until the hour format ‘12 hr' flashes on the display.
  2. Set the hour format using the [arrow-left]/[arrow-right] buttons. Confirm with the Set button.
  3. The hour value flashes in the display. Set the hour using the [arrow-left]/[arrow-right] buttons. Confirm with the Set button.
  4. The minutes flash in the display. Set the minutes using the [arrow-left]/[arrow-right] buttons. Confirm with the Set button.
  5. The year (Y) flashes in the display. Set the year using the [arrow-left]/[arrow-right] buttons. Confirm with the Set button.
  6. The month (M) flashes in the display. Set the month using the [arrow-left]/[arrow-right] buttons. Confirm with the Set button.
  7. The day (D) flashes in the display. Set the day using the [arrow-left]/[arrow-right] buttons. Confirm with the Set button.

8.2 Alarm function

Setting the alarm

NOTE: If you set the alarm using the buttons on the Wake-up Light, you can select the alarm time and the alarm tone. If you set the alarm using the ‘beurer LightUp' app, you can also select the alarm days, snooze time, and simulated sunrise (Wake-up Light gradually becomes brighter over time).

To set the time using the buttons on the Wake-up light, proceed as follows:

  1. Press the Set button on the device once. ‘SET Alarm' appears on the display. Wait three seconds until the alarm symbol ' ' flashes on the display.
  2. Use the [arrow-left]/[arrow-right] buttons to select either ' ' (Alarm 1) or ' ' (Alarm 2). Confirm with the Set button.
  3. The alarm hour flashes in the display. Set the alarm hour using the [arrow-left]/[arrow-right] buttons. Confirm with the Set button.
  4. The alarm minutes flashes in the display. Set the alarm minutes using the [arrow-left]/[arrow-right] buttons. Confirm with the Set button.
  5. Alarm tone ' ' wake-up melody 1–6 or radio ' ' flashes on the display. Use the [arrow-left]/[arrow-right] buttons to select the desired alarm tone. Confirm with the Set button to activate alarm.

The simulated sunrise starts before the set alarm in order to prepare the body for waking up. The alarm only goes off afterward.

Activating the alarm

To activate the alarm, press the Alarm button on the Wake-up light repeatedly until ‘ALARM1', 'ALARM2' or 'ALARM1 and ALARM2' appears in the display.

Deactivating the alarm

To deactivate the alarm, press the Alarm button on the Wake-up light repeatedly until 'OFF' appears in the display.

Activating the snooze function

When the alarm sounds, lightly touch the [on/off button] ⓘ to activate the snooze function. You can set the snooze time in the 'beurer LightUp' app.

Switching off the alarm

When the alarm sounds, press the [on/off button] ⓘ to activate the snooze function. You can set the snooze time in the 'beurer LightUp' app.

8.3 Light/reading lamp

NOTE: You can switch on the light using the ‘beurer LightUp' app or the buttons on the Wake-up Light.

To switch on the light using the buttons on the Wake-up Light:

  1. Briefly press the [on/off button] ⓘ on the inserted device. The light comes on.
  2. To switch the light off again, press the [on/off button] ⓘ again. The light goes off.
  3. You can use the brightness buttons + - to set the brightness.

8.4 Mood light

The Wake-up light can also be used as a mood light.

NOTE: If you switch on the mood light via the Wake-up Light, you get a mood light with a standardized color change. If you set the mood light via the ‘beurer LightUp' app, you also have the following setting options.

  • Mood light color
  • 10 preset sequences (e.g. rainbow)
  • Timer

To activate the mood light:

  1. Press and hold the [on/off button] for 2 seconds. The color changing mood light comes on.
  2. To maintain one color on the mood light, press the [on/off button] again.
  3. To switch the mood light off, press the [on/off button] again.

8.5 Sleep Function

The Sleep function is ideal for helping you fall asleep. Here you can set the sunset function. With this function, the light gradually dims over time. You can also assign various relaxing sounds to the simulated sunset and either use natural light or a mood light.

NOTE: You can set the sunset function using the ‘beurer LightUp' app or the buttons on the Wake-up Light.

To switch on the sunset function:

  1. To use the sunset function with normal light, briefly press the [on/off button]. The light comes on. To use the sunset function with the mood light, press and hold the [on/off button] for two seconds. The mood light comes on.
  2. Press and hold the [on/off button] for 5 seconds. 02 flashes on the display. Use the [arrow-left]/[arrow-right] buttons within five seconds to set sunset duration.
  3. Use the [arrow-left]/[arrow-right] buttons to set the volume.
  4. Use the Set button to set the desired sound.

8.6 Radio

NOTE: You can configure the radio settings using the 'beurer LightUp' app or the buttons on the Wake-up Light.

Setting the radio station

To set the radio station using the buttons on the Wake-up light, proceed as follows:

  1. Press the Set button on the device twice. ‘SET Radio' appears on the display. Wait three seconds until the current station frequency flashes on the display.
  2. Use the [arrow-left]/[arrow-right] buttons to set the desired radio station. To start the station search, press and hold the [arrow-left] or [arrow-right] button. Confirm with the Set button.
  3. Program number P 01 flashes on the display. Use the [arrow-left]/[arrow-right] buttons to select the desired program number (e.g. P 01 or P 02) under which the set radio station is to be saved. There are 10 radio memory spaces available. Confirm with the Set button.

Switching the radio On/Off

  1. To switch the radio on or off, press the Radio button on the Wake-up light.
  2. To select a station preset, press the Set button and then press the [arrow-left]/[arrow-right] buttons to select a radio station preset.
  3. To set the volume, press the [arrow-left]/[arrow-right] buttons during radio playback.

8.7 Setting the Display Brightness

NOTE: The Wake-up Light has four display brightness levels (0, 1, 2, and 3). You can set the display brightness in the settings of the 'beurer LightUp' app or use the buttons on the Wake-up Light.

To set the display brightness using the buttons on the Wake-up Light:

  1. Press the Set button on the device four times. ‘SET Display' appears on the display. Wait three seconds until a number flashes on the display.
  2. Use the [arrow-left]/[arrow-right] buttons to set the desired display brightness. Confirm with the Set button. The selected brightness is shown after five seconds.

Alternatively, you can also tap on the right-hand side of the display to temporarily increase brightness.

8.8 AUX Connection

You can connect an external audio source (e.g. MP3 player, smartphone or CD player) to the Wake-up light via the AUX input.

  1. Connect the included AUX cable to your audio source.
  2. Insert the other end of the AUX cable into the AUX input on the rear of the device.
  3. Press the AUX button on the device. The external audio source is now connected.
  4. Use the [arrow-left]/[arrow-right] buttons to adjust the volume.
  5. Press the AUX button to exit AUX mode again.

8.9 Switching the Button Tone On/Off

You can only switch the button tone of the Wake-up Light on and off via the settings in the 'beurer LightUp' app.

8.10 Activating/Deactivating Bluetooth®

NOTE: The Wake-up Light comes with Bluetooth® already activated. If you deactivate Bluetooth®, the Wake-up Light cannot connect to the ‘beurer LightUp' app.

To deactivate Bluetooth® on the Wake-up Light:

  1. Press the Set button on the device five times. 'SET Bluetooth' appears In the display. Wait three seconds until 'on' flashes on the display.
  2. Press the [arrow-left] or [arrow-right] button until 'OFF' appears In the display. Confirm with the Set button. Bluetooth® is now deactivated.

Important Safety Notes

Signs and symbols

Whenever used, the following signs identify safety and property damage messages and designate a level of hazard or seriousness.

READ AND UNDERSTAND THIS ENTIRE MANUAL INCLUDING THE SAFETY SECTION AND ALL INSTRUCTIONS AND WARNINGS COMPLETELY AND CAREFULLY BEFORE USING THIS PRODUCT. FOLLOW ALL SAFETY INSTRUCTIONS AND WARNINGS TO AVOID HAZARDOUS SITUATIONS AND TO USE THIS PRODUCT CORRECTLY.

⚠️ WARNING This is the safety alert symbol. It alerts you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.

WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.

ℹ️ NOTICE addresses practices not related to personal injury, such as product and/or property damage.

IMPORTANT SAFEGUARDS

⚠️ WARNING – To reduce the risk of fire, electric shock, or serious personal injury:

NOTICE:

Care, Maintenance and Disposal

Disposal

Observe the local regulations for material disposal. Dispose of the device in accordance with local regulations. If you have any questions, please contact the local authorities responsible for waste disposal.

Troubleshooting Guide

You can find further information and a list of frequently asked questions (FAQs) about this product at www.beurer.com.

Technical Specifications

SpecificationValue
TypeWL 75
IlluminanceMax. approx. 2,000 lux (at distance of 5.9 in /15 cm)
LightLED technology (LED service life: > 20,000 hours)
Light levels10 on Wake-up Light; Infinitely variable via app
Mood lightAutomatic RGB color change, option of setting individual color
Snooze time1–30 minutes
LCD backlighting4 levels
Time12-hour and 24-hour display formats
Alarm2 alarm modes: Tone, radio
6 Wake-up melodies
4 Sleep melodies
Charging functionSmartphones can be charged via USB
Button toneOff, On
AUXLine-in, 0.14 in (3.5 mm) jack plug
RadioFrequency range 88.1 to 107.9MHz (in 0.2MHz steps), 10 memory spaces
Loudspeaker2 watts
Mains part voltage supplyAs shown on rating plate
Mains part protection classProtection class II
Frequency band2402MHz-2480MHz
Transmission powermax. 4dBM

FCC Compliance Information

Responsible Party – U.S. Contact Information

Beurer North America LP, 1 Oakwood Boulevard, Suite 255 Hollywood, FL 33020, United States 1-800-536-0366 info@beurer.com

FCC Compliance Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Industry Canada Compliance Information

IC Notice:

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device.

IC Radiation Exposure Statement:

This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Warranty

Limited Lifetime Warranty For Original Purchaser

Your Beurer Wake-up Light, model WL 75, is warranted to be free from defects in materials and workmanship for the life of the product under normal conditions of intended use and service. This warranty extends only to the original retail purchaser and does not extend to retailers or subsequent owners.

For warranty service contact our customer service department at 1-800-536-0366 or at info@beurer.com to provide a description of the problem. If the problem is deemed to be within the scope of the limited lifetime warranty, you will be asked to mail the product at your costs in its original package with proof of purchase, your name, address and phone number. If the problem is not deemed to be within the scope of the limited lifetime warranty, we will provide a quotation for repair respectively replacement and return shipping fee.

This warranty does not cover damage caused by misuse or abuse; accident; the attachment of unauthorized accessory; alteration to the product; improper installation; misapplication; lack of reasonable care with respect to the product; unauthorized repairs or modifications; improper use of electrical/power supply; normal wear; loss of power; dropped product; malfunction or damage of an operating part as a result of failure to comply with instructions for use or to provide manufacturer's recommended maintenance; transit damage; theft; neglect; vandalism; or environmental conditions; loss of use during the period the product is at a repair facility or otherwise awaiting parts or repair; or any other conditions whatsoever that are beyond the control of Beurer. This warranty is void if the product is ever used in a commercial or business environment. The maximum liability of Beurer under this warranty is limited to the purchase price actually paid by the customer for the product covered by the warranty, as confirmed by proof of purchase, regardless of the amount of any other direct or indirect damage suffered by the customer.

This warranty is effective only if the product is purchased and operated in the country in which the product is purchased. A product that requires modifications or adaptation to enable it to operate in any other country than the country for which it was designed, manufactured, approved and/or authorized, or repair of products damaged by these modifications is not covered under this warranty.

THE WARRANTY PROVIDED HEREIN SHALL BE THE SOLE AND EXCLUSIVE WARRANTY. ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE DURATION OF THIS APPLICABLE WRITTEN WARRANTY. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you.

IN NO EVENT SHALL BEURER BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS, IMPLIED OR ANY OTHER THEORY OF LIABILITY, WHATSOEVER. Some states do not allow the exclusion or limitation of special, incidental, or consequential damages, so the above limitation may not apply to you.

Beurer does not authorize anyone, including, but not limited to, retailers, the subsequent consumer purchaser of the product from a retailer or remote purchaser, to obligate Beurer in any way beyond the terms set forth herein.

This warranty does not extend to the purchase of opened, used, repaired, repackaged and/or resealed products, including but not limited to sale of such products on Internet auction sites and/or products by surplus or bulk resellers. Any and all warranties or guarantees shall immediately cease and terminate in connection with any products or parts thereof which are repaired, replaced, altered, or modified, without the prior explicitly written consent of Beurer.

This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state.

PDF preview unavailable. Download the PDF instead.

original Adobe PDF Library 15.0 Adobe InDesign 15.1 (Macintosh)

Related Documents

Preview Beurer WL 75 Wake-up Light: User Manual, Features, and Specifications
Comprehensive user manual for the Beurer WL 75 Wake-up Light. Learn about its features including sunrise/sunset simulation, mood lighting, reading lamp, music station, app control, and specifications. Includes setup, operation, troubleshooting, and warranty information.
Preview Beurer WL 50 Wake Up Light: Your Guide to Natural Awakening and Sleep
Discover the Beurer WL 50 Wake Up Light, designed for a gentle and natural awakening and sleep experience. Features simulated sunrise/sunset, mood lighting, FM radio, and Bluetooth connectivity for a holistic wellness routine.
Preview Beurer WL 32 Wake-up Light: User Manual and Features
Comprehensive guide to the Beurer WL 32 Wake-up Light, covering setup, features like sunrise simulation, alarm functions, radio, mood lighting, and safety precautions. Includes instructions for use in English, Spanish, and French.
Preview Beurer TL 35 Tageslichtlampe: Gebrauchsanweisung und Bedienungshandbuch
Umfassende Gebrauchsanweisung für die Beurer TL 35 Tageslichtlampe. Erfahren Sie mehr über die sichere Anwendung, Funktionen und Vorteile zur Verbesserung von Stimmung und Wohlbefinden.
Preview Beurer TL 85 Daylight Therapy Lamp Instructions
Comprehensive instructions for the Beurer TL 85 daylight therapy lamp, covering usage, safety, and technical specifications. Learn how to effectively use the lamp for light therapy to combat seasonal affective disorder and improve well-being.
Preview Beurer Tips for Healthy Sleep: A Guide to Better Rest
Discover practical tips from Beurer for achieving healthy sleep, including advice on falling asleep easily, ensuring restful nights, and waking up naturally. Learn about Beurer products like the LA 40 Aroma Diffuser and LV 500 PureFlow air purifier designed to enhance your sleep environment.
Preview Beurer BC 28 Blutdruckmessgerät – Gebrauchsanweisung
Umfassende Gebrauchsanweisung für das Beurer BC 28 Blutdruckmessgerät am Handgelenk. Erfahren Sie mehr über die Einrichtung, Anwendung, Pflege und Fehlerbehebung für genaue Blutdruckmessungen.
Preview Beurer LA 40 Aroma Diffuser Instructions for Use
Comprehensive instructions for the Beurer LA 40 Aroma Diffuser, covering setup, operation, cleaning, maintenance, troubleshooting, and technical specifications. Includes safety warnings and warranty information.