iPega PG-9076 Bluetooth Gamepad User Manual

Buttons Overview

The iPega PG-9076 controller features a comprehensive set of buttons and ports for versatile gaming. Below is a detailed description of its layout:

• Micro USB Port: Located at the top center, used for charging and wired connections.
• LT/LB (Left Trigger/Bumper): Located on the left shoulder, used for in-game actions.
• Turbo Button: Activates or deactivates the turbo function for other buttons.
• START Button: Standard game start/pause button.
• Directional Buttons (D-pad): A cross-shaped pad for precise directional input (Up, Down, Left, Right).
• SELECT Button: Standard game select/menu button.
• Left Analog Stick + L3: A clickable analog stick for movement and camera control. L3 is activated by pressing the stick down.
• 2.4G Receiver Port: Located at the bottom center, used for connecting the 2.4G wireless receiver.
• Charging/Mode LED: An indicator light that shows charging status and current operating mode.
• RT/RB (Right Trigger/Bumper): Located on the right shoulder, used for in-game actions.
• iOS Button: Specific button for iOS mode activation.
• iCADE Button: Specific button for iCADE mode activation.
• A/B/X/Y Buttons: Standard action buttons, typically color-coded (e.g., A-green, B-red, X-blue, Y-yellow).
• Android Button: Specific button for Android mode activation.
• Right Analog Stick + R3: A clickable analog stick for movement and camera control. R3 is activated by pressing the stick down.
• HOME Button (Power Button): Central button used for powering on/off and returning to the home screen.

Connecting to an Android Device

To connect the iPega PG-9076 controller to an Android device via Bluetooth:

1. Press and hold the "X" button and the "HOME" button simultaneously for 2 seconds. The LED indicator will flash rapidly.
2. Enable Bluetooth on your Android device and search for available devices.
3. Select "PG-9076" from the list of found devices to connect.
4. Once connected, the LED indicator will illuminate steadily.

Compatibility

The controller supports most games from Android Game Center and Google Playstore. Some games, such as ShadowGun, allow for customizable controls. For certain online games like PUBG, it may be necessary to download the Octopus driver to properly configure the buttons. The Octopus driver can be found via a QR code or link provided by iPega.

For Android Game Center, search for "Android Game Center" in your app store.

For the Octopus Driver, search for "Octopus Driver" in your app store or refer to iPega's official support resources.

Connecting to a Computer

Wired Connection

1. Hold the "START" button on the controller and connect it to your computer's USB port using a USB cable.
2. When the controller is connected in wired mode, LED2 will light up. In this mode, the controller supports games on PS3 consoles.
3. To switch to X-input mode for PC compatibility, hold the "HOME" button for 3 seconds. LED3 will light up, indicating X-input mode.

Bluetooth Connection

1. When the controller is off, press and hold the "Android" button and the "HOME" button simultaneously to search for Bluetooth devices. LEDs 1 to 4 will flash rapidly (if your computer has Bluetooth, proceed to step 2.2).
2. Insert the Bluetooth 4.0 receiver into a USB port on your computer. The driver will install automatically.
3. In the bottom right corner of your screen, the Bluetooth symbol will appear. Right-click the Bluetooth icon and select "Add Device".
4. The controller should appear in the list of devices during the search.
5. Connect to the controller. The LED should light up steadily after connection.
6. The controller will enter D_INPUT mode after connection.

Turbo Function

1. Activating Turbo: Hold down the button you wish to apply the Turbo function to (e.g., "A"), then press the "TURBO" button. The selected button will now operate in Turbo mode.
2. Deactivating Turbo: Hold down the button that has the Turbo function activated, then press the "TURBO" button again. The selected button will now operate normally.

Connecting via 2.4G (PS3/PC/Android Smart TV/TV Box)

1. Insert the 2.4G receiver into a USB port on your PS3, computer, Android Smart TV, or TV box.
2. Press and hold the "HOME" button and the "SELECT" button simultaneously. All LEDs will flash, indicating the controller has entered pairing mode.
3. LED2 will light up after a successful connection, and the controller will be ready for use.

The controller can be used with various devices:

• Bluetooth Controller: For devices supporting Bluetooth.
• 2.4G Receiver: For devices connecting via the 2.4G dongle.
• PS3: Compatible with PlayStation 3.
• Android Smart TV: For Android-based smart televisions.
• TV Box: For various TV box devices.

Mouse and Multimedia Functions

1. For multimedia control functions to work, the device must be in mouse mode.
2. After connecting in HID mode, you can switch to mouse mode by pressing the "HOME" button once. LED2 will light up.
3. In mouse mode, the button functions are as follows:
   • Y Button: Volume +
   • A Button: Volume -
   • X Button: Previous Track
   • B Button: Next Track
   • L2 Button: Play/Pause
   • L1 Button: Left Mouse Click
   • R2 Button: Play/Pause
   • R1 Button: Right Mouse Click
   • Left Analog Stick: Fast Mouse Movement
   • Right Analog Stick: Slow Mouse Movement
4. To switch back from mouse mode to HID mode, press the "HOME" button once.

Charging, Sleep, and Wake-up

1. When the controller is off (press "HOME" to turn on/off) and charging, all 4 LEDs will flash slowly. Once charging is complete, the LEDs will turn off. If the controller is connected to another device via Bluetooth while charging, the current mode LED will flash slowly. Once charging is complete, the LED will light up steadily.
2. Sleep/Wake-up: After 10 minutes of inactivity, the controller will automatically enter sleep mode. To wake it up, press the "HOME" button.
3. In case of low battery, the current mode LED will flash rapidly.

Technical Parameters

• Working Voltage: DC3.7V
• Working Current: 30mA
• Continuous Use Time: 10 hours
• Sleep Current: < 10uA
• Charging Voltage/Current: DC5V/500mA
• Bluetooth Range: ≤8M
• Battery Capacity: 380mAh
• Standby Time: Up to 30 days after full charge

Important Notes

1. Do not store the device in humid or hot places.
2. Do not bend, hit, drop, or puncture the device to avoid damage.
3. The device has a built-in battery. Do not dispose of it with household waste.
4. Do not charge the controller near fire or other heat sources.
5. Unauthorized personnel should not disassemble the device. Disassembling the device voids the warranty.

Troubleshooting

Q: Cannot pair the device via Bluetooth.

A: Check if another device is already connected to the controller and disconnect it. Enable Bluetooth and try again. If you still cannot connect, use a needle to press and hold the "RESET" button on the back of the controller for 5 seconds. Then try connecting again.

Q: Cannot turn on the controller.

A: Recharge the controller before first use or after a long period of inactivity. If the LED does not light up when connected for charging, replace the cable with another one or press and hold the "RESET" button on the back of the controller with a needle.

Q: The analog stick moves on its own, or other buttons do not work correctly in the game.

A: Press and hold the "RESET" button on the back of the controller with a needle. Do not use any buttons during pairing.

Package Contents

The iPega PG-9076 package includes the following items:

• Controller: The iPega PG-9076 Bluetooth Gamepad itself.
• 2.4G Receiver: A USB dongle for 2.4G wireless connection.
• User Manual: This instruction manual.
• Micro USB Cable: For charging and wired connections.

Simplified Declaration of Conformity

Manufacturer: PEGA LIMITED

Address: Room D, 15/F, Leahander Centre, 28 Wang Wo Tsai Street, Tsuen Wan, N.T, Hong Kong, China

Product: Wireless Controller / GamePad

Model: PG-9076

Radio Frequency: 2402-2480MHz

Maximum Radio Frequency Power: 5dBm

The product complies with Directive 2014/53/EU of the European Parliament and of the Council of 16 April 2014 on the harmonization of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC.

The Declaration of Conformity is available on the website: https://files.innpro.pl/iPega

Environmental Protection

Electronic equipment marked with the WEEE symbol (crossed-out wheeled bin) according to the European Union directive must not be disposed of with other municipal waste. It is subject to selective collection and recycling at designated points. By ensuring its proper disposal, potential negative consequences for the natural environment and human health are prevented. The waste electrical and electronic equipment collection system complies with local environmental protection regulations. Detailed information on this topic can be obtained from the municipal office, waste disposal facility, or the store where the product was purchased.

The product meets the requirements of the so-called New Approach Directives of the European Union (EU), concerning issues related to user safety, health protection, and environmental protection, specifying hazards that should be detected and eliminated. This document is a translation of the original operating instructions created by the manufacturer.

The product should be regularly maintained (cleaned) by the user or by specialized service points at the user's expense and responsibility. If there is no information about necessary periodic maintenance or service actions in the operating instructions, the physical condition of the product should be regularly assessed, at least once a week, compared to a physically new product. If any deviation is detected or found, maintenance (cleaning) or service steps should be taken urgently. Lack of proper maintenance (cleaning) and reaction when a deviation is detected may lead to permanent damage to the product. The guarantor is not responsible for damages resulting from negligence.

Battery Information

LI-ION Battery

The device is equipped with a LI-ION (lithium-ion) battery, which, due to its physical and chemical structure, ages over time and with use. The manufacturer specifies the maximum operating time of the device under laboratory conditions, where optimal operating conditions exist for the device, and the battery is new and fully charged. Actual operating time may differ from the declared in the offer and is not a defect of the device but a characteristic of the product. To maintain maximum battery life, it is not recommended to discharge it below 3.18V or 15% of its total capacity. Lower values, such as 2.5V for a cell, permanently damage it and are not covered by warranty. If the battery or the entire device is not used for more than one month, the battery should be charged to 50% and its charge level checked cyclically every two months. Store the battery and device in a dry place, away from sunlight and negative temperatures.

LIPO Battery

The device is equipped with a LI-PO (lithium-polymer) battery, which, due to its physical and chemical structure, ages over time and with use. The manufacturer specifies the maximum operating time of the device under laboratory conditions, where optimal operating conditions exist for the device, and the battery is new and fully charged. Actual operating time may differ from the declared in the offer and is not a defect of the device but a characteristic of the product. To maintain maximum battery life, it is not recommended to discharge it below 3.5V or 5% of its total capacity. Lower values, such as 3.2V for a cell, permanently damage it and are not covered by warranty. If the battery or the entire device is not used for more than one month, the battery should be charged to 50% and its charge level checked cyclically every two months. Store the battery and device in a dry place, away from sunlight and negative temperatures.

Warranty Information

Detailed information on the distributor's/manufacturer's warranty conditions is available on the website: https://serwis.innpro.pl/gwarancja