SimPal-TY130 WiFi Thermostat Socket
User Manual
1.1 Package Contents
- WiFi Thermostat Socket (1 unit)
- Temperature sensor (1 PC)
- User manual (1 PC)
1.2 Socket Instruction
Diagram showing the SimPal-TY130 socket. Key components labeled include:
- Power plug: Connects to the wall outlet.
- Power socket: Where the appliance is plugged in.
- LED indicator: Shows device status.
- M button: Used for reset and pairing.
- USB connector: For potential future use or diagnostics.
- Temp-sensor connector: Where the temperature sensor connects.
1.3 Light Indicator
| Color | Power Status | Action | Status |
|---|---|---|---|
| Blue | Power OFF | Constant light | Power OFF and work in standby mode |
| Red | Power ON | Constant light | Power ON and work in standby mode |
| Blue & RED | N/A | Flash fast | Waiting to set WiFi |
2.1 Install APP and Add Device
Download the "Smart Life" APP and install it on your Android or iOS smartphone. All operations and settings are performed via the APP.
Steps:
- Plug the TY130 socket into a 110-230V AC power outlet. The LED will flash slowly, indicating it's ready for WiFi setup. If the LED is constantly lit, it means WiFi was previously set. To reset, press and hold the 'M' button for 10 seconds until the LED flashes slowly again.
- Register an account in the APP and log in. Tap the '+' icon to add a device.
- The APP will display "Discovering devices...". Tap "Add" to add the device. Select your local WiFi SSID and enter the password to complete the setup.
Visual Description: The process involves screens for discovering devices, adding manually, and selecting a device (TY130) within a room setting, showing current temperature and humidity readings.
2.2 Manual Power On/Off
The device home page displays the current temperature (e.g., 25.3°C). To manually control power:
- Turn the "Autowork" function OFF.
- When the power button is grey, the device is OFF. Click the power button to turn it ON; a blue power icon will appear.
2.3 Thermostat Control
Turn the "Autowork" function ON to enable thermostat control. The display will show thermostat details.
- Select "Heating" or "Cooling" mode.
- Set the target temperature (e.g., 27°C).
2.4 Timer Control
This function allows you to set schedules for automatic thermostat control. Timer control is only available when "Autowork" is ON.
- Tap the timer icon ⏱️ to set the schedule.
- You can temporarily manually turn the power ON or OFF, but the timer control will resume at the next scheduled action time.
2.5 Temperature Alert
Tap the alert icon ? to set temperature alerts.
- Configure a temperature range (e.g., High temperature alert: > 35°C, Low temperature alarm: < 27°C).
2.6 Check Temperature Record
Tap the history icon ? to view temperature records. You can check daily, weekly, or monthly temperature history.
2.7 Reset Factory Settings
Resetting the device will remove it from all registered APP accounts. You will need to set up WiFi and add the device again via the APP after resetting. To reset, press and hold the 'M' button for 10 seconds. The device will then reset its factory settings.
3.0 Technical Specification
- Product size: 120*60*40 mm (excluding plug)
- WiFi protocol: 802.11 b/g/n
- Power input: AC 110~250V
- Temperature sensor range: -20 ℃ to 105 ℃
- Indicator: Power output and wireless signal in Blue
- Max power loading: 16A or 3500W
- Standby power consumption: 25mA
