ASUS ROG STRIX B650-A GAMING WIFI Motherboard Quick Start Guide

This guide provides step-by-step instructions for installing and setting up your ASUS ROG STRIX B650-A GAMING WIFI motherboard.

Motherboard Layout

The motherboard features various components and connectors. Key areas include:

CPU Socket (Socket AM5)
DDR5 DIMM slots (DIMM_A1, DIMM_A2, DIMM_B1, DIMM_B2)
M.2 slots (M.2_1, M.2_2, M.2_3)
PCIe slots (PCIEX16_1, PCIEX16_2, PCIEX16_3, PCIEX16_4)
Power connectors (ATX_PWR, ATX_12V_1, ATX_12V_2, PLUG_8PIN_PWR)
Fan headers (CPU_FAN, CPU_OPT, AIO_PUMP, CHA_FAN1-4)
Front panel connectors (PANEL, AAFP)
Rear I/O connectors (HDMI, DP, LAN, USB ports, Audio)
BIOS Flashback button (BIOS_FLBK)
Various other headers and connectors for system control and expansion.

A visual representation of the motherboard layout is provided, indicating the location of these components.

Installation Steps

Step 1: Install the CPU

Open the CPU socket lever, align the CPU with the socket's triangle mark, and gently place the CPU into the socket. Close the lever to secure the CPU.

Diagram shows CPU alignment and socket lever operation.

Step 2: Install the CPU Fan

Mount the CPU cooler according to its manual. Connect the CPU fan cable to the CPU_FAN header on the motherboard.

Diagram illustrates mounting the CPU cooler and connecting the fan cable.

Step 3: Install Memory Modules

Open the clips on the DIMM slots. Align the notch on the memory module with the notch in the slot, and press down firmly until the clips lock into place.

Diagram shows memory module insertion and clip locking.

Step 4: Install Storage Devices

Install M.2 SSDs into the M.2 slots. For detailed M.2 installation, refer to the user guide. Install other storage devices as needed.

Diagram shows M.2 SSD installation and general storage device placement.

Step 5: Install Expansion Card(s)

Open the retention clip of the appropriate PCIe slot. Remove the corresponding expansion slot cover(s) on the back of the chassis. Align the expansion card with the slot and press down firmly until it is seated. Secure the card with screws.

Diagram illustrates inserting an expansion card into a PCIe slot.

Step 6: Install the System Panel Connector

Connect the system panel connectors (power switch, reset switch, HDD LED, power LED) to the corresponding pins on the motherboard.

Diagram shows the front panel connector pinout and connections.

Step 7: Install ATX Power Connectors

Connect the 24-pin ATX power connector and the 8-pin ATX 12V power connector to the motherboard.

Diagram shows the location of ATX power connectors on the motherboard.

Step 8: Connect Input/Output Devices

Connect your monitor, keyboard, mouse, and other peripherals to the appropriate ports on the rear I/O panel.

Diagram shows the rear I/O panel with various ports labeled.

Step 9: Power On and Install OS/Drivers

Connect the power cord, turn on the system, and proceed to install your operating system and necessary drivers.

Indicates powering on the system and installing software.

Important Notices

Australia Statement Notice: Updated warranties apply to all ASUS products consistent with the Australian Consumer Law. For details, visit https://www.asus.com/support/. ASUS Customer Service: 1300 2787 88.

India RoHS: This product complies with the “India E-Waste (Management) Rules, 2016” regarding hazardous substances.

Türkiye RoHS: AEEE Yönetmeliğine Uygundur.

Note on Cooler Installation: When installing a cooler, remove the screws and retention module only. Do not remove the plate on the bottom.

	ASUS ROG STRIX B650E-E GAMING WIFI Motherboard Quick Start Guide Concise guide to installing and setting up the ASUS ROG STRIX B650E-E GAMING WIFI motherboard, covering CPU, fan, memory, storage, expansion cards, and system connections.
	ASUS ROG STRIX B650E-I GAMING WIFI Motherboard Quick Start Guide A concise guide for installing the ASUS ROG STRIX B650E-I GAMING WIFI motherboard, covering CPU, RAM, storage, expansion cards, and system connections for a smooth setup.
	ASUS ROG STRIX B650-A GAMING WIFI Motherboard Quick Start Guide A concise guide for installing the ASUS ROG STRIX B650-A GAMING WIFI motherboard, covering essential steps from CPU installation to system setup, with multilingual support.
	ASUS TUF GAMING B650M-E WIFI Motherboard Quick Start Guide This guide provides essential steps for installing the ASUS TUF GAMING B650M-E WIFI motherboard, including CPU, fan, memory, storage, and expansion card installation, along with system connections and initial setup.
	ASUS ROG Strix B850-A Gaming WiFi Motherboard Quick Start Guide A concise, SEO-optimized HTML guide for installing the ASUS ROG Strix B850-A Gaming WiFi motherboard, covering component preparation, installation steps, and safety information.
	ASUS PRIME B650-PLUS Motherboard Quick Start Guide Concise guide for installing and setting up the ASUS PRIME B650-PLUS motherboard, covering CPU, memory, expansion cards, and system connections.
	TUF GAMING B650-PLUS WIFI Motherboard Quick Start Guide A quick start guide for the ASUS TUF GAMING B650-PLUS WIFI motherboard, detailing installation steps for CPU, fan, memory, storage, expansion cards, system panel connectors, and power connectors, along with I/O device connection and operating system installation.
	ASUS TUF GAMING B650M-E WIFI Quick Start Guide A concise guide for installing and setting up the ASUS TUF GAMING B650M-E WIFI motherboard, covering CPU, memory, storage, expansion cards, and system connections.