TECHNICAL DATA:
| SKU | 2890 |
|---|---|
| LUMENS | 110LM |
| NO. OF LEDs | 24 Pcs |
| BEAM ANGLE | 170° |
| DIMENSION | 15x15x24cm |
| BATTERY CAPACITY | AC: 3.7V, 2200mAh, 18650 Li |
SOLAR PANEL DATA:
| SOLAR PANEL WATTS | 2W, DC: 5.5V |
|---|---|
| CHARGING TIME | 5-6 Hours |
| WORKING TIME | 3-12 Hours |
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best. The warranty is valid for 3 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. This product is warranted for manufacturing defects only.
WARNING
[warning symbol] 1. Installation must be performed by a qualified person.
2. The light source of this luminaire is not replaceable; when the light source reaches its end of life, the whole luminaire should be replaced.
3. Replace any cracked protective shield.
4. Do not immerse in water.
5. Luminaire cannot be installed in low-lying areas, so as not to soak.
[disposal symbol] This marking indicates that this product should not be disposed of with other household wastes.
INSTALLATION DIAGRAM DESCRIPTION
The diagram illustrates the V-TAC VT-983 Solar LED Stand Light. It features a solar panel at the top, connected to the main light fixture. The fixture has a decorative design and houses the LED light source. Mounting hardware, such as screws, are shown for securing the base of the light to the ground. A separate graphic indicates the switch functions: PRESS 1 TIME for Warm White (WW) or manual ON, PRESS 2 TIMES for White (W), PRESS 3 TIMES for Day White (DW), and PRESS 4 TIMES to turn OFF.
The light also indicates it has a non-replaceable light source [non-replaceable light source] and features IP65 rating and a 3-year warranty.
INSTALLATION INSTRUCTION
- Drill a hole in the ground.
- Dig the plastic into the hole.
- Fix the bracket onto the ground and tighten the screws.
SWITCH FUNCTION:
- Press 1st time: to change the light into Warm White or Manually switch on the light.
- Press 2nd time: to change that color into White.
- Press 3rd time: to change the color into Day White.
- Press 4th time: to switch off the light.
OPERATING MODES:
- At dusk, automatically turn on the light to 100% brightness (up to 12 hours).
- At dawn, light will automatically turn off.
CONTACT INFORMATION
In case of any query/issue with the product, please reach out to us at: support@v-tac.eu
For More products range, inquiry please contact our distributor or nearest dealers.
V-TAC EUROPE LTD. Bulgaria, Plovdiv 4000, bul.L.Karavelow 9B
