Introduction
This user manual provides essential information for the Infinix HOT 60i smartphone, model X6728. It covers setup, features, charging, safety guidelines, and regulatory compliance.
Getting Started
Know Your Phone
Key components of the Infinix HOT 60i include:
- Front camera
- Volume buttons
- Power button & side fingerprint sensor
- One-Tap AI Button
- NFC
SIM/SD Card Installation
Install SIM and SD cards with the phone powered off. Consult device diagrams for proper insertion.
Charging the Phone
Charge the device using a charger or USB cable. Use only Infinix-approved chargers and cables to maintain device integrity and warranty.
Specifications and Safety
RF Information
The device supports multiple RF bands (GSM, WCDMA, LTE, Bluetooth, Wi-Fi, GNSS, FM, NFC) with detailed frequency ranges and output power specifications provided.
SAR Compliance
The Infinix HOT 60i meets international radio wave exposure guidelines, with SAR values tested for head and body compliance.
Important Cautions
- Protect hearing by avoiding prolonged high volume with earphones.
- Handle batteries carefully to prevent explosion risks from improper replacement or disposal.
- Ensure adapters are accessible and installed near equipment.
- Observe specified operating temperature ranges.
- Specific adapter models (U180XED, U180XKB, U180XKC, U450XKB, U450XEB) and their electrical specifications are listed.
- RF compliance is maintained at 5mm from the body with non-metallic holders.
Regulatory Information
Network restrictions may apply, especially for 5GHz Wi-Fi. WLAN use in the 5.15-5.35 GHz range is restricted to indoor environments.
INFINIX MOBILITY LIMITED confirms the radio equipment type X6728 complies with Directive 2014/53/EU. The full EU declaration of conformity is available at:
https://www.infinixmobility.com/care/declaration
The device operates on Android™, a trademark of Google LLC. DTS patents are also acknowledged.
