Turtle Beach Recon 70 Quick Start Guide

Introduction

This guide provides essential information for setting up and using your Turtle Beach Recon 70 gaming headset.

IMPORTANT: READ BEFORE USING.

For questions, visit: turtlebeach.com/recon70

Package Contents

The package includes the Turtle Beach Recon 70 headset.

Diagram Description: An image shows the Recon 70 headset.

Headset Controls

Master Volume: Adjusts the master volume of incoming game and chat audio.

Mic Mute: Flip up the microphone to mute it. (Refer to position 2 on the headset for mute function).

Note: Over-rotating the mic past designated positions may cause damage.

Setup Guides

Xbox One Setup

The Recon 70 requires the Xbox One Controller with a 3.5mm headset jack. For original Xbox One Controllers without a 3.5mm jack, an adapter may be required (available at turtlebeach.com).

Diagram Description: Shows the headset connected to an Xbox One controller via the 3.5mm jack.

Volume Setup

1. Press the [Xbox Button] on your controller.
2. Go to the System tab.
3. Select Audio.
4. Set Headset Volume to maximum.
5. Set Headset Chat Mixer to the middle setting.
6. Set Mic Monitoring to your preferred level.

Surround Sound Setup (Xbox One Only)

For enhanced audio experiences on Xbox One, enable Windows Sonic for Headphones.

Diagram Description: Shows the headset connected to an Xbox One controller, with an indication of the audio output settings.

1. Press the [Xbox Button] on your controller.
2. Go to the System tab.
3. Select Settings >> Display & sound >> Audio Output.
4. Set Headset format to Windows Sonic for Headphones.

For more information on Xbox Surround Sound, visit: turtlebeach.com/sonic

PS4® Setup

Connect the headset to the PS4 controller's 3.5mm jack.

Diagram Description: Shows the headset connected to a PS4 controller via the 3.5mm jack.

1. Go to Settings >> Devices >> Audio Devices.
2. Set Input & Output Device to Headset Connected to Controller.
3. Set Output to Headphones to All Audio.
4. Set Volume Control (Headphones) level to maximum.
5. Select Adjust Microphone Level and follow on-screen instructions to calibrate.

Nintendo Switch™ Setup

Connect the headset to the Nintendo Switch console's 3.5mm audio jack.

Diagram Description: Shows the headset connected to a Nintendo Switch console.

1. Access the Nintendo Switch system settings.
2. Navigate to Audio Output >> Headset Format.
3. Select Windows Sonic for Headphones.

Note: Chat is available for games that support in-game chat.

PC/Mac® & Mobile Setup

For PCs with separate green (audio out) and pink (mic in) connectors, a PC Splitter Cable is required. This adapter is available online at turtlebeach.com.

Connect the headset's 3.5mm jack to your device's audio port.

Diagram Description: Shows the headset connected to a PC (tower and monitor) and a mobile phone, illustrating the 3.5mm jack connection.

Regulatory Compliance

This product complies with various international standards.

Declaration of Conformity: The [CE Symbol] marking indicates compliance with the EU EMC Directive (2014/30/EU). This equipment meets conformance standards for Safety (e.g., EN 60950-1), Emissions (e.g., EN 55032), and Immunity (e.g., EN 55024).

For a complete Declaration of Conformity, visit: http://www.turtlebeach.com/homologation

FCC Compliance: This equipment complies with FCC Rules Part 15 as a Class B digital device, designed to provide reasonable protection against harmful interference.

Canadian ICES Statements: Complies with Canadian ICES-003 Class B limits for radio-noise emissions.

WEEE Directive: The [WEEE Symbol] indicates that this product must not be disposed of with household waste. It must be recycled at designated collection points for electrical and electronic equipment to protect health and the environment.

Turtle Beach Europe Ltd. is registered with Comply Direct for packaging waste obligations. For information on waste management and recycling, visit: https://www.complydirect.com/the-recycling-room/